PCL

PCL NICHICON | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 2

Technical content

CONDUCTIVE POLYMER ALUMINUM SOLID ELECTROLYTIC CAPACITORS PCL Chip Type, Higher Capacitance LongLife Assurance Specifications Temperature Characteristics (Max.Impedance Ratio) Category Temperature Range Rated Voltage Range Rated Capacitance Range Capacitance Tolerance Tangent of loss angle (tan δ) ESR ( 1) Leakage Current ( 2) Performance CharacteristicsItem –55 to +105°C 4 to 16V 22 to 2700µF ± 20% at 120Hz, 20°C Less than or equal to the specified value at 120Hz, 20°C Less than or equal to the specified value at 100kHz, 20°C Less than or equal to the specified value . After 2 minutes' application of rated voltage at 20°C Endurance Damp Heat (Steady State) Resistance to Soldering Heat Marking The specifications listed at right shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 20000 hours at 105°C. The specifications listed at right shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 1000 hours at 60°C, 90% RH. After soldering the capacitor under the soldering conditions prescribed here, the capacitor shall meet the specifications listed at right. Pre-heating shall be done at 150 to 200°C and for 60 to 180 sec. The duration for over +230°C temperature at capacitor surface shall not exceed 60 seconds. In case peak temperature is 250°C or less, reflow soldering shall be two times maximum. In case peak temperature is 260°C or less, reflow soldering shall be once. Measurement for solder temperature profile shall be made at the capacitor top and the terminal. Navy blue print on the case top Capacitance change tan δ Leakage current ( 2) ESR ( 1) Within ± 20% of the initial capacitance value ( 3) 150% or less than the initial specified value 150% or less than the initial specified value Less than or equal to the initial specified value Capacitance change tan δ Leakage current ( 2) ESR ( 1) Within ± 20% of the initial capacitance value ( 3) 150% or less than the initial specified value 150% or less than the initial specified value Less than or equal to the initial specified value Capacitance change tan δ Leakage current ( 2) ESR ( 1) Within ± 10% of the initial capacitance value ( 3) 130% or less than the initial specified value 130% or less than the initial specified value Less than or equal to the initial specified value Long life of 20000 hours at 105°C. High reliability, Low ESR. SMD type : Lead free reflow soldering condition at 260°C peak correspondence. Compliant to the RoHS directive (2011/65/EU). AEC-Q200 compliant. Please contact us for details. 1 ESR should be measured at both of the terminal ends closest where the terminals protrude through the plastic platform. 2 Conditioning : If any doubt arises, measure the leakage current after the voltage treatment of applying DC rated voltage continuously to the capacitor for 120 minutes at 105°C. 3 Initial value : The value before test of examination of resistance to soldering. P C L C M C L 1 1 G S Configuration Taping code Size code Capacitance tolerance (±20%) Rated capacitance (120µF) Rated voltage (16V) Series name Type C L 1 2 0 C 8 9 1 H 0.3 MAX. φD±0.5 B±0.2 A±0.2 C±0.2 0.5 MAX. E LSeries Voltage ( C:16V) Plastic platform Lot No.Capacitance Negative Positive +0.1 -0.4 Dimensions Type numbering system (Example : 16V 120µF) Voltage V 4 6.3 10 16 Code g j A C PCL Long Life PCS Frequency coefficient of rated ripple current

0 Frequency0/

120Hz 1kHz 10kHz 100kHz or more 0.05 0.30 0.70 1.00 NEW Size φD L A B C E H φ5 × 6L 5.0 5.9 6.0 5.3 5.3 1.6 0.5 to 0.8 φ6.3 × 6L 6.3 5.9 7.3 6.6 6.6 2.1 0.5 to 0.8 φ8 × 7L 8.0 6.9 9.0 8.3 8.3 3.2 0.8 to 1.1 φ8 × 10L 8.0 9.9 9.0 8.3 8.3 3.2 0.8 to 1.1 φ8 × 12L 8.0 11.9 9.0 8.3 8.3 3.2 0.8 to 1.1 φ10 × 10L 10.0 9.9 11.0 10.3 10.3 4.6 0.8 to 1.1 φ10 × 12.7L 10.0 12.6 11.0 10.3 10.3 4.6 0.8 to 1.1 (mm)

CONDUCTIVE POLYMER ALUMINUM SOLID ELECTROLYTIC CAPACITORS PCL Dimensions Rated Capacitance (µF) Rated Voltage (V) (code) Surge Voltage (V) Leakage Current (µA) ESR (mΩ) (at 100kHz 20°C) Rated Ripple (mArms) (105°C / 100kHz) tan δ Part NumberCase Size φD × L (mm) (0G) (1C) (1A) 6.3 (0J) 4.6 18.4 11.5 7.2 150 180 390 560 1200 1800 2200 2700 220 330 680 1000 1800 120 150 470 820 1200 120 270 390 470 680 300 360 312 448 960 1440 1760 2160 148 277 415 856 1260 2268 165 340 240 300 940 1640 2400 176 124 262 384 864 1248 1504 2176 2100 2300 2700 3200 5400 5500 5400 5600 1900 2500 3900 4600 4800 5500 1100 1900 2700 2880 3800 4300 4800 1000 2000 2700 2900 3600 3900 4200 4700 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 5× 6 5× 6 6.3× 6 8× 7 8× 10 8× 12 10×10 10×12.7 5× 6 6.3× 6 8× 7 8× 10 8× 12 10×12.7 5× 6 5× 6 6.3× 6 8× 7 8× 10 10×10 10×12.7 5× 6 6.3× 6 6.3× 6 8× 7 8× 10 8× 12 10×10 10×12.7 PCL0G151MCL1GS PCL0G181MCL1GS PCL0G391MCL1GS PCL0G561MCL1GS PCL0G122MCL1GS PCL0G182MCL1GS PCL0G222MCL1GS PCL0G272MCL1GS PCL0J470MCL1G S PCL0J221MCL1G S PCL0J331MCL1G S PCL0J681MCL1G S PCL0J102MCL1G S PCL0J182MCL1G S PCL1A330MCL1GS PCL1A680MCL1GS PCL1A121MCL1GS PCL1A151MCL1GS PCL1A471MCL1GS PCL1A821MCL1GS PCL1A122MCL1GS PCL1C220MCL1GS PCL1C390MCL1GS PCL1C820MCL1GS PCL1C121MCL1GS PCL1C271MCL1GS PCL1C391MCL1GS PCL1C471MCL1GS PCL1C681MCL1GS October 2018