PCLD-789D ADVANTECH | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 1
Technical content
Features
Cold-junction +24.4 mV/° C, 0 V at 0° C Compensation Input Channels 16 differential Input Conditions Gains CMRR Nonlinearity Setting Time 1,000 125 dB 0.005% FSR 75 µsec. 100 115 dB 0.005% FSR 15 µsec. 10 105 dB 0.007% FSR 15 µsec. 1 85 dB 0.015% FSR 15 µsec. Input Range ±10 V max. depending on the selected gain Output Range ±10 V max. Overvoltage Protection ±30 V continuous General Certifications CE Connectors Controller: 1 x DB37 male connector 2 x 20-pin box header for daisy chaining I/O: Screw terminals Dimensions (L x W) 205 x 114 mm (8.1" x 4.5") Mounting 4 x screw holes for flat surface mounting Power Consumption +5 V @ 30 mA max, +12 V @ 80 mA max.
Ordering Information
PCLD-789D Amplifier and Multiplexer Board w/ 1m DB37 Cable PCL-10137-1 DB37 Cable, 1 m PCL-10137-2 DB37 Cable, 2 m PCL-10137-3 DB37 Cable, 3 m PCL-10120-1 20-pin Flat Cable, 1 m PCL-10120-2 20-pin Flat Cable, 2 m PCLD-789D Amplifier and Multiplexer Board Multiplexes 16 differential inputs to one A/D input Expands a PC-LabCard™ product’s analog inputs to 128 channels High-grade instrumentation amplifier provides switch selectable gains of 1, 2, 10, 50, 100, 200, 1,000 Onboard cold-junction compensation circuits for direct thermocouple measurement Built-in signal conditioning functions include filter, attenuator and current shunt Second connectors onboard allow daisy chaining Screw-clamp terminal blocks permit easy and reliable connections Block Diagram Pin Assignments Introduction PCLD-789D is a front-end signal conditioning and channel multiplexing daughterboard for use with PC-LabCard™ product’s analog input ports. It multiplexes 16 differential input channels into a single A/D converter input channel. You can cascade up to ten PCLD-789Ds, allowing a single data acquisition card to access 160 analog input channels. PCLD-789D has DB37 and 20-pin flat cable connectors and lets your PCL-818L or PCL-818HD access up to 128 channels without using an additional digital output cable to select channels. The PCLD-789D uses a high-grade instrumentation amplifier that provides switch-selectable gains of 1, 2, 10, 50, 100, 200 and 1,000. This amplifier lets you accurately measure low-level signals with your PC-LabCard™ product. The board also contains a cold-junction sensing circuit that allows direct temperature measurement from thermocouple transducers. A wide variety of thermocouples are supported with software compensation and linearization.