PCI7410 TI | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 4
Technical content
www.ti.com
FEATURES
Card, UltraMedia and Integrated 1394a-2000 OHCI Two-Port PHY/Link-Layer Controller Fully interoperable with FireWire and i.LINK implementations of IEEE Std 1394 PC Card Standard 8.0 compliant Compliant with Intel Mobile Power Guideline PCI Bus Power Management Interface 2000 Specification 1.1 compliant Full IEEE Std 1394a-2000 support includes: Advanced Configuration and Power Interface connection debounce, arbitrated short reset, (ACPI) Specification 2.0 compliant multispeed concatenation, arbitration PCI Local Bus Specification Revision 2.3 acceleration, fly-by concatenation, and port compliant disable/suspend/resume PC and PC2001 compliant Power-down
applications
include: Specification for PCI-to-CardBus Bridges automatic device power down during Fully compliant with provisions of IEEE Std suspend, PCI power management for 1394-1995 for a high-performance serial bus link-layer, and inactive ports powered down, and IEEE Std 1394a-2000 ultralow-power sleep mode Fully compliant with 1394 Open Host Two IEEE Std 1394a-2000 fully compliant Controller Interface Specification 1.1 cable ports at 100M bits/s, 200M bits/s, and 1.8-V core logic and 3.3-V I/O cells with 400M bits/s internal voltage regulator to generate 1.8-V Cable ports monitor line conditions for active core V CC connection to remote node Universal PCI interfaces compatible with Cable power presence monitoring 3.3-V and 5-V PCI signaling environments Separate cable bias (TPBIAS) for each port Supports PC Card or CardBus with hot Physical write posting of up to three insertion and removal outstanding transactions Supports 132-MBps burst transfers to PCI burst transfers and deep FIFOs to maximize data throughput on both the PCI tolerate large host latency bus and the CardBus External cycle timer control for customized Supports serialized IRQ with PCI interrupts synchronization Programmable multifunction terminals Extended resume signaling for compatibility Many interrupt modes supported with legacy DV components Serial ROM interface for loading subsystem PHY-Link logic performs system initialization ID and subsystem vendor ID and arbitration functions ExCA-compatible registers are mapped in PHY-Link encode and decode functions memory or I/O space included for data-strobe bit level encoding Intel 82365SL DF register compatible PHY-Link incoming data resynchronized to Supports ring indicate, SUSPEND and PCI local clock CCLKRUN protocol and PCI bus Lock LOCK Low-cost 24.576-MHz crystal provides Provides VGA/palette memory and I/O, and transmit and receive data at 100M bits/s, subtractive decoding options, LED activity 200M bits/s, and 400M bits/s terminals Please be aware that an important notice concerning availability, standard warranty, and use in critical sheet. UltraMedia is a trademark of Texas Instruments. FireWire is a trademark of Apple Computer, Inc.. i.LINK is a trademark of Sony Corporation of America. PRODUCTION DATA information is current as of publication date. Copyright 2006, Texas Instruments Incorporated Products conform to specifications per the terms of the Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters.
www.ti.com
DESCRIPTION
D0, D1, D2, and system power management power states Register bits give software control of Initial bandwidth available and initial contender bit, power class bits, link active channels available registers control bit, and IEEE Std 1394a-2000 submicron, low-power CMOS transmit requests technology Register access fail interrupt when the PHY SCLK is not active The Texas Instruments PCI7410 device is an integrated single-socket UltraMedia PC Card controller with an IEEE 1394 open host controller link-layer controller (LLC) and two-port 1394 PHY. The PCI7410 controller also includes a dedicated interface that can be used as a Secure Digital (SD)/MultiMediaCard (MMC), or Memory Stick socket. This high performance integrated solution provides the latest in PC Card, IEEE 1394, and UltraMedia technology. The PCI7410 CardBus controller is a four-function, 33-MHz PCI device compliant with the PCI Local Bus Specification Function provides a PC Card socket controller compliant with the latest PC Card Standards Function provides a dedicated socket for either SD/MMC or Memory Stick. Function of the PCI7410 controller is an integrated IEEE 1394 OHCI host controller and two-port PHY. Function is the interface to load the PCI7410 program RAM with firmware. The PCI7410 controller provides Cards, and supports any combination of 16-bit and CardBus cards powered at V or 3.3 V as required. There is no PCMCIA card and socket service software changes required to move systems from the existing CardBus socket controller to the PCI7410 controller. The PCI7410 controller is register compatible with the Intel 82365SL DF ExCA controller and implements the host interface defined in the PC Card Standard The PCI7410 internal data path logic allows the host to access 8-, 16-, and 32-bit cards using full 32-bit PCI cycles for maximum performance. Independent buffering and the pipeline architecture provide an unsurpassed performance level with sustained bursting. The PCI7410 controller can be programmed to accept posted writes to improve bus utilization. All card signals are internally buffered to allow hot insertion and removal without external buffering. Function of the PCI7410 controller provides a dedicated interface for either a Secure Digital (and MMC) or Memory Stick socket. Secure Digital cards are based upon the MultiMediaCard (MMC). SD is essentially a superset of MMC. The additional security essential. Memory Stick cards are about the size of a stick of gum and are 2,8 mm thick. Developed by Sony, there are two types of Memory Stick cards, the standard Memory Stick and MagicGate Memory Stick. MagicGate technology provides security to Memory Stick cards so that they can be used to store and protect copyrighted data. Function of the PCI7410 controller is an integrated 1394a-2000 OHCI PHY/link-layer controller (LLC) that is fully compliant with the PCI Local Bus Specification the PCI Bus Power Management Interface Specification IEEE Std 1394-1995, IEEE Std 1394a-2000, and the 1394 Open Host Controller Interface Specification It is capable of transferring data between the 33-MHz PCI bus and the 1394 bus at 100M bits/s, 200M bits/s, and 400M bits/s. The PCI7410 controller provides two 1394 ports that have separate cable bias (TPBIAS). The PCI7410 controller also supports the IEEE Std 1394a-2000 power-down enhancements. As required by the 1394 Open Host Controller Interface Specification (OHCI) and IEEE Std 1394a-2000, internal control registers are memory-mapped and non-prefetchable. The PCI configuration header is accessed through configuration cycles specified by PCI, and it provides plug-and-play (PnP) compatibility. Furthermore, the PCI7410 controller is compliant with the PCI Bus Power Management Interface Specification as specified by the PC 2001 Design Guide requirements. The PCI7410 controller supports the D0, D1, D2, and power states. Function of the PCI7410 controller is the interface to load the PCI7410 program RAM with firmware. This function provides an I/O window that a software driver uses to load the PCI7410 firmware into the internal RAM. Submit Documentation Feedback
www.ti.com PCI7410 SLLA247 JULY 2006 The PCI7410 design provides PCI bus master bursting, and it is capable of transferring a cacheline of data at 132M bytes/s after connection to the memory controller. Because PCI latency can be large, deep FIFOs are provided to buffer the 1394 data. The PCI7410 controller provides physical write posting buffers and a highly-tuned physical data path for SBP-2 performance. The PCI7410 controller also provides multiple isochronous contexts, multiple cacheline burst transfers, advanced internal arbitration, and bus-holding buffers. The PCI7410 PHY-layer provides the digital and analog transceiver functions needed to implement a two-port node in a cable-based 1394 network. Each cable port incorporates two differential line transceivers. The transceivers include circuitry to monitor the line conditions as needed for determining connection status, for initialization and arbitration, and for packet reception and transmission. The PCI7410 PHY-layer requires only an external 24.576-MHz crystal as a reference for the cable ports. An external clock may be provided instead of a crystal. An internal oscillator drives an internal phase-locked loop (PLL), which generates the required 393.216-MHz reference signal. This reference signal is internally divided to provide the clock signals that control transmission of the outbound encoded strobe and data information. A 49.152-MHz clock signal is supplied to the integrated LLC for synchronization and is used for resynchronization of the received data. Data bits to be transmitted through the cable ports are received from the integrated LLC and are latched internally in synchronization with the 49.152-MHz system clock. These bits are combined serially, encoded, and transmitted at 98.304M, 196.608M, or 393.216M bits/s (referred to as S100, S200, or S400 speeds, respectively) as the outbound data-strobe information stream. During transmission, the encoded data information is transmitted differentially on the twisted-pair B (TPB) cable pair(s), and the encoded strobe information is transmitted differentially on the twisted-pair A (TPA) cable pair(s). Various implementation specific functions and general-purpose inputs and outputs are provided through several multifunction terminals. These terminals present a system with options, such as PCI LOCK and parallel IRQs. ACPI-complaint general-purpose events may be programmed and controlled through the multifunction terminals, and an ACPI-compliant programming interface is included for the general-purpose inputs and outputs. The PCI7410 controller is compliant with the latest PCI Bus Power Management Specification and provides several low-power modes, which enable the host power system to further reduce power consumption. The PCI7410 controller also has a four-pin interface compatible with both the TI TPS2211 and TPS2221 power switches. An advanced CMOS process achieves low power consumption and allows the PCI7410 controller to operate at PCI clock rates up to MHz. NOTE: This product is for high-volume PC only. For a complete datasheet or more information contact support@ti.com. Submit Documentation Feedback
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI’s standard warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by government requirements, testing of all parameters of each product is not necessarily performed. TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and applications using TI components. To minimize the risks associated with customer products and applications, customers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for such altered documentation. Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. Following are URLs where you can obtain information on other Texas Instruments products and application solutions: Products Applications Amplifiers amplifier.ti.com Audio www.ti.com/audio Data Converters dataconverter.ti.com Automotive www.ti.com/automotive DSP dsp.ti.com Broadband www.ti.com/broadband Interface interface.ti.com Digital Control www.ti.com/digitalcontrol Logic logic.ti.com Military www.ti.com/military Power Mgmt power.ti.com Optical Networking www.ti.com/opticalnetwork Microcontrollers microcontroller.ti.com Security www.ti.com/security Low Power Wireless www.ti.com/lpw Telephony www.ti.com/telephony Video & Imaging www.ti.com/video Wireless www.ti.com/wireless Mailing Address: Texas Instruments Post Office Box 655303 Dallas, Texas 75265 Copyright 2006, Texas Instruments Incorporated