DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

Features

  • Magnetically Shielded Construction
  • Low Profile
  • Low DC Resistance Electrical Test Equipment Physical Packaging: 2000 per 13” Reel Resistance to Soldering Heat (L): HP4284A, CH11025, CH3302, CH1320S LCR Meter (DCR): CH16502, Agilent 33420A Micro-oHm Meter Marking: EIA Code PCHP32 Isat (A) Max 2.20 2.00 1.70 1.40 1.20 1.00 0.75 0.65 0.55 0.40 0.35 SRF (MHz) Min 100 Inductance Range: 1.0 - 47µH Tolerance: 30% 1.0-1.5µH, 20% 2.2-47µH Operating Temp: -40°C to +125°C MSL: Level 1 Isat: DC current at which the inductance drops approximately 30% from its value without current. Irms: DC current that causes the temperature rise (∆T = 40°C) from 25°C ambient. Pre-Heat: 150°C, 1Min Solder Composition: Sn96.5%, AG3%, Cu0.5% Temperature: 245±5°C Flux for Lead Free: Rosin 9.5% Dip Time: 4±1Sec Depth: Completely cover the termination 100 A B C D F E

SMD SEMI SHIELDED POWER CHIP INDUCTOR ALLIED COMPONENTS INTERNATIONAL949-356-1780 www.a llie dcomponents.com RoHS 05/31/2017 PCHP32 0 0.511 .5 2 2.5 DC Current(A) 0.5 1.5 Inductance(µH) PCHP32-1R0N 0 0.5 1 1.5 2 DC Current(A) 0.5 1.5 2.5 Inductance(µH) PCHP32-1R5N 0 0.5 1 1.5 2 DC Current(A) Inductance(µH) PCHP32-2R2M DC Current(A) 1.5 4.5 Inductance(µH) PCHP32-3R3M DC Current(A) Inductance(µH) PCHP32-4R7M 0 0.2 0.4 0.6 0.8 1 DC Current(A) Inductance(µH) PCHP32-6R8M 0 0.2 0.4 0.6 0.8 1 DC Current(A) Inductance(µH) PCHP32-100M 0 0.2 0.4 0.6 0.8 1 DC Current(A) Inductance(µH) PCHP32-150M 0 0.15 0.3 0.45 0.6 DC Current(A) Inductance(µH) PCHP32-220M DC Current(A) Inductance(µH) PCHP32-330M DC Current(A) Inductance(µH) PCHP32-470M Typical Performance Curve

SMD SEMI SHIELDED POWER CHIP INDUCTOR ALLIED COMPONENTS INTERNATIONAL949-356-1780 www.a llie dcomponents.com RoHS 05/31/2017 PCHP32 Reel Dimension Tape Dimension Tearing Off Force Top cover tape 165° to180° Base tape F Type A(mm) B(mm) C(mm) D(mm) 178x8mm 50 Min 13±0.8 The force for tearing off cover tape is 15 to 80 grams in the arrow direction under the following conditions. Room Temp. ( )℃ Room Humidity (%) Room atm (hPa) Tearing Speed mm/min 5~35 45~85 860~1060 300 Bo(mm) Ao(mm) Ko(mm) P(mm) t(mm) 3.2±0.05 8.4±1.0 Packaging Information Application Notice ‧Storage Conditions To maintain the solderability of terminal electrodes: 1. PCHP32 Series meets IPC/JEDEC J-STD-020D standard-MSL, level 1. 2. Temperature and humidity conditions: Less than 40°C and 60% RH. 3. Recommended products should be used within 12 months form the time of delivery. 4. The packaging material should be kept where no chlorine or sulfur exists in the air. ‧Transportation 1. Products should be handled with care to avoid damage or contamination from perspiration and skin oils. 2. The use of tweezers or vacuum pick up is strongly recommended for individual components. 3. Bulk handling should ensure that abrasion and mechanical shock are minimized. A B D C 178x8mm t Ko P2:2±0.05 P Bo Ao Po:4±0.1 W:8.0±0.1 Bottom View 178±2.0