DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 4
Technical content
Features
- Magnetically Shielded Construction
- Low Profile
- Low DC Resistance Electrical Test Equipment Physical Packaging: 2000 per 7” Reel Resistance to Soldering Heat (L): HP4284A, CH11025, CH3302, CH1320, CH1320S LCR Meter (DCR): CH16502, Agilent 33420A Micro-oHm Meter Marking: EIA Code PCHP20CF Isat (A) Max 2.70 2.00 1.80 1.46 1.26 0.90 0.77 0.72 0.55 0.45 0.40 0.38 Isat (A) Typ .044 .062 .080 .130 .145 .245 .360 .500 .720 1.40 1.80 2.00 Inductance Range: .47 - 22µH Tolerance: 30% .47 - 1.5µH, 20% 2.2 - 22µH Operating Temp: -40°C to +125°C MSL: Level 1 Isat: DC current at which the inductance drops approximately 30% from its value without current. Irms: DC current that causes the temperature rise (∆T = 40°C) from 25°C ambient. Pre-Heat: 150°C, 1Min Solder Composition: Sn96.5%, AG3%, Cu0.5% Temperature: 245±5°C Flux for Lead Free: Rosin 9.5% Dip Time: 4±1Sec Depth: Completely cover the termination Irms (A) Max 2.35 2.05 1.60 1.26 1.20 0.95 0.96 0.55 0.45 0.36 0.34 0.27 100 A B C D E L
0 0.3 0.6 0.9 1.2 DCcurrent(A) Inductance(µH) PCHP20CF-4R7M-RC 0 0.2 0.4 0.6 0.8 1 DCcurrent(A) Inductance(µH) PCHP20CF-6R8M-RC 0 0.5 1 1.5 2 2.5 DCcurrent(A) 0.3 0.6 0.9 1.2 Inductance(µH) PCHP20CF-R68N-RC DCcurrent(A) 0.2 0.4 0.6 0.8 Inductance(µH) PCHP20CF-R47N-RC 0 0.5 1 1.5 2 2.5 DCcurrent(A) 0.5 1.5 Inductance(µH) PCHP20CF-1R0N-RC 0 0.5 1 1.5 2 DCcurrent(A) 0.7 1.4 2.1 2.8 Inductance(µH) PCHP20CF-1R5N-RC 0 0.4 0.8 1.2 1.6 DCcurrent(A) Inductance(µH) PCHP20CF-2R2M-RC 0 0.3 0.6 0.9 1.2 DCcurrent(A) 1.5 4.5 Inductance(µH) PCHP20CF-3R3M-RC Typical Performance Curve SMD SHIELDED POWER CHIP INDUCTOR ALLIED COMPONENTS INTERNATIONAL949-356-1780 www.a llie dcomponents.com RoHS 10/18/2017 PCHP20CF
DCcurrent(A) PCHP20CF-220M-RC DCcurrent(A) Inductance(µH) PCHP20CF-180M-RC 0 0.2 0.4 0.6 0.8 DCcurrent(A) Inductance(µH) PCHP20CF-100M-RC 0 0.15 0.3 0.45 0.6 DCcurrent(A) Inductance(µH) PCHP20CF-150M-RC Inductance(µH) SMD SHIELDED POWER CHIP INDUCTOR ALLIED COMPONENTS INTERNATIONAL949-356-1780 www.a llie dcomponents.com RoHS 10/18/2017 PCHP20CF
Top cover tape 165° to180° Base tape F Type A(mm) B(mm) C(mm) D(mm) 178x8mm 50 Min 13±0.8 The force for tearing off cover tape is 15 to 80 grams in the arrow direction under the following conditions. Room Temp. ( )℃ Room Humidity (%) Room atm (hPa) Tearing Speed mm/min 5~35 45~85 860~1060 300 Bo(mm) Ao(mm) Ko(mm) P(mm) t(mm) 2.5±0.1 8.4±1.0 Packaging Information Application Notice ‧Storage Conditions To maintain the solderability of terminal electrodes: 1. PCHP20CF Series meets IPC/JEDEC J-STD-020D standard-MSL, level 1. 2. Temperature and humidity conditions: Less than 40°C and 60% RH. 3. Recommended products should be used within 12 months form the time of delivery. 4. The packaging material should be kept where no chlorine or sulfur exists in the air. ‧Transportation 1. Products should be handled with care to avoid damage or contamination from perspiration and skin oils. 2. The use of tweezers or vacuum pick up is strongly recommended for individual components. 3. Bulk handling should ensure that abrasion and mechanical shock are minimized. A B D C 178x8mm t Ko P2: 2±0.05 P Bo Ao Po: 4±0.1 W:8.0±0.1 178±2.0 SMD SHIELDED POWER CHIP INDUCTOR ALLIED COMPONENTS INTERNATIONAL949-356-1780 www.a llie dcomponents.com RoHS 10/18/2017 PCHP20CF