PCHC125P-R47M-RC ALLIED | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 1
Technical content
Features
- Magnetically shielded construction
- Expanded operating temp range Electrical Inductance Range: .47µH to 10µH Tolerance: 20% over entire range, Operating Temp: -55ºC ~ +125ºC Test Equipment (L): HP4284A LCR meter or equivalent Pre-Heat 150ºC, 1 minute. Physical Packaging: 500 pieces per 13 inch reel.
- High saturation current up to 65A Resistance to Soldering Heat Solder Composition: Sn/Ag3.0/Cu0.5 Solder Temp: 260ºC ± 5ºC (DCR): CH16502, Agilent 33420A Mico-Ohm Meter Marking: EIA Inductance Code Temp Rise: without core loss. Part temperature should not exceed 125ºC including temperature rise. Test Frequency: 100KHz, 1.0Vdc PCHC125P-1R5M-RC 1.50 20 100 4.1 48 23 PCHC125P-2R2M-RC 2.20 20 100 5.5 32 20
- Low DC Resistance
- Suitable for pick and place ∆ T=40ºC Typical at rated Irms Immersion Time: 10 sec. ± 1 sec. Additional values available Available in tighter tolerances Storage Temp: -55ºC ~ +125ºC Inductance Drop: 20% typical at rated Isat IDC: 3260B WK & DC Bias 3265BWK Dimensions: Inches (mm) Schematic