DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 1
Technical content
Features
- Magnetically shielded construction Electrical Inductance Range: .22µH to 22µH, Tolerance: 20% over entire range Operating Temp: -55ºC ~ +125ºC Pre-Heat 150ºC, 1 minute. Physical Packaging: 500 pieces per 13 inch reel.
- High saturation current up to 45A Resistance to Soldering Heat Solder Composition: Sn/Ag3.0/Cu0.5 Solder Temp: 260ºC ± 5ºC Marking: EIA Inductance Code Irms: approx 40ºC. Test Frequency: 100KHz, 0.5V
- Low DC Resistance
- Expanded operating temp range Current at which the temp will rise Immersion Time: 10 sec. ± 1 sec. Isat: Current at which the Inductance will PCHC104R7-3R3M-RC 3.3 20 13.2 11 12 PCHC104R7-6R8M-RC 6.8 20 25 6 10
- Suitable for pick and place (A) Typ. .397+/-.011 (10.1+/-0.3) (11.6 Max) .456 Max (4.0 Max) .157 Max (3.0 Typ.) .118 Typ. .098+/-0.019 (2.5+/-0.5) drop approximately 30%. Max. (A) Typ. additional values available. Available in tighter tolerances. StorageTemp: -55ºC ~ +125ºC Part temperature should not exceed 125ºC including temperature rise. (L): HP 4284A LCR meter or equivalent Test Equipment DCR: CH502, Agilent 33420A Micro-Ohm meter IDC: 3260B WK & DC Bias 3265B WK PCHC104R7-8R2M-RC 8.2 20 30 6 9 PCHC104R7-100M-RC 10 20 30 6.5 7 PCHC104R7-150M-RC 15 20 53 5 6 PCHC104R7-220M-RC 22 20 64 4.5 4.5 Dimensions: Inches (mm)