PCHC104H ALLIED | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 1
Technical content
Features
- Magnetically shielded construction
- Expanding operating temp range Electrical Inductance Range: .36µH to 10µH Tolerance: 20% over entire range, Operating Temp: -55ºC ~ +125ºC Test Equipment (L): HP 4284A LCR meter or equivalent Pre-Heat 150ºC, 1 minute. Physical Packaging: 900 pieces per 13 inch reel. m
- High saturation current up to 40A Resistance to Soldering Heat Solder Composition: Sn/Ag3.0/Cu0.5 Solder Temp: 260ºC ± 5ºC (DCR): CH16502, Agilent 33420A Micro-Ohm meter Marking: EIA Inductance Code Temp rise: with out core loss. Part temperature should not exceed 125ºC including temperature rise. Test Frequency: 100KHz, 1.0Vdc
- Low DCR resistance
- Suitable for pick and place ∆ T=40ºC Typical at rated Irms Immersion Time: 10 sec. ± 1 sec. Additional values available Storage Temp: -55ºC ~ +125ºC Inductance drop: 20% typical at rated Isat (IDC): 3260B WK & DC Bias 3265B WK PCHC104H-6R8M-RC 6.80 20 100 24 11 6.5 Available in tighter tolerances PCHC104H-100M-RC 10 20 100 35 9 5 Dimensions: Inches (mm) Schematic