PCH-27X-154KLT

DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 3

Technical content

+1-847-639-6400 sales@coilcraft.com +44-1236-730595 sales@coilcraft-europe.com +886-2-2264 3646 sales@coilcraft.com.tw +86-21-6218 8074 sales@coilcraft.com.cn + 65-6484 8412 sales@coilcraft.com.sg © Coilcraft Inc. 2013 This product may not be used in medical or high risk applications without prior Coilcraft approval. Specification subject to change without notice. Please check web site for latest information. Axial Lead Power Chokes – P C H - 2 7, 4 5 Document 138-1

• Wide inductance range in a low profile part
• High saturation current—up to 14.3 Amps
• Standard EIA and custom values; most values shipped from stock
• Available with an optional heat-shrink sleeve for additional protention for the windings Designers Kit P409 contains 2 each of 30 parts Core material Ferrite Core and winding loss See www.coilcraft.com/coreloss Terminations RoHS compliant tin-silver over copper. Other termina- tions available at additional cost. Weight PCH-27: 1.55 – 1.90 g; PCH-45: 6.16 – 8.34 g Ambient temperature –40°C to +85°C Storage temperature Component: –40°C to +85°C. Tray packaging: –40°C to +80°C Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C / 85% relative humidity) Failures in Time (FIT) / Mean Time Between Failures (MTBF) 38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332 Packaging 100 parts per tray (standard) Optional tape and reel PCH-27: 1000 per 13″ reel; 10 mm part spacing PCH-45: 300 per 13″ reel; 15 mm part spacing Tape width: 75.5 mm; leads are trimmed to fit tape width. PCB washing Only pure water or alcohol recommended PCH-45 Series 0.938 23,8 max clean lead to clean lead

20 AWG tinned copper

1.25 ±0.250 31,75 ±6,35 0.863 21,92 max 1.25 ±0.250 31,75 ±6,35 0.453 11,5 dia max PCH-27 Series 0.650 16,51 max clean lead to clean lead 1.25 ±0.250 31,75 ±6,35 0.585 14,85 max 1.25 ±0.250 31,75 ±6,35 0.277 7,04 dia max Document 138-1 Revised 07/21/10 Dimensions are in inches mm

+1-847-639-6400 sales@coilcraft.com +44-1236-730595 sales@coilcraft-europe.com +886-2-2264 3646 sales@coilcraft.com.tw +86-21-6218 8074 sales@coilcraft.com.cn + 65-6484 8412 sales@coilcraft.com.sg © Coilcraft Inc. 2013 This product may not be used in medical or high risk applications without prior Coilcraft approval. Specification subject to change without notice. Please check web site for latest information. Document 138-2 Revised 07/21/10 Part Inductance Percent SRF typ DCR max Isat4 Irms5 number 1 nom2 tolerance3 (MHz) (Ohms) (A) (A) PCH-27X-392KLT 3.9 µH 10 38 0.017 7.01 1.7 PCH-27X-472KLT 4.7 µH 10 26 0.024 6.16 1.3 PCH-27X-562KLT 5.6 µH 10 25 0.025 5.79 1.3 PCH-27X-682KLT 6.8 µH 10 25 0.028 5.20 1.3 PCH-27X-822KLT 8.2 µH 10 22 0.030 4.70 1.3 PCH-27X-103KLT 10 µH 10 17 0.033 4.30 1.3 PCH-27X-123_LT 12 µH 10,5 16 0.037 3.80 1.3 PCH-27X-153_LT 15 µH 10,5 12 0.041 3.41 1.3 PCH-27X-183_LT 18 µH 10,5 11 0.045 3.09 1.3 PCH-27X-223_LT 22 µH 10,5 10 0.064 2.82 1.0 PCH-27X-273_LT 27 µH 10,5 7 0.071 2.53 1.0 PCH-27X-333_LT 33 µH 10,5 7 0.078 2.29 1.0 PCH-27X-393_LT 39 µH 10,5 7 0.085 2.09 1.0 PCH-27X-473_LT 47 µH 10,5 6 0.094 1.88 1.0 PCH-27X-563_LT 56 µH 10,5 6 0.12 1.74 0.84 PCH-27X-683_LT 68 µH 10,5 7 0.16 1.57 0.67 PCH-27X-823_LT 82 µH 10,5 4 0.22 1.41 0.52 PCH-27X-104_LT 100 µH 10,5 3 0.25 1.28 0.52 PCH-27X-124_LT 120 µH 10,5 3 0.35 1.17 0.42 PCH-27X-154_LT 150 µH 10,5 3 0.39 1.04 0.42 PCH-27X-184_LT 180 µH 10,5 3 0.43 0.943 0.42 PCH-27X-224_LT 220 µH 10,5 3 0.47 0.848 0.42 PCH-27X-274_LT 270 µH 10,5 2 0.65 0.764 0.33 PCH-27X-334_LT 330 µH 10,5 2 0.72 0.690 0.33 PCH-27X-394_LT 390 µH 10,5 2 0.78 0.632 0.33 PCH-27X-474_LT 470 µH 10,5 2 1.04 0.573 0.26 PCH-27X-564_LT 560 µH 10,5 1 1.14 0.520 0.26 PCH-27X-684_LT 680 µH 10,5 1 1.49 0.472 0.21 PCH-27X-824_LT 820 µH 10,5 1 2.14 0.427 0.16 PCH-27X-105_LT 1.0 mH 10,5 1 2.36 0.385 0.16 PCH-27X-125_LT 1.2 mH 10,5 1 2.59 0.350 0.16 PCH-27X-106_LT 10 mH 10,5 0.30 24.0 0.116 0.052 PCH-27X-126_LT 12 mH 10,5 0.25 33.2 0.105 0.040 PCH-27X-156_LT 15 mH 10,5 0.30 47.2 0.094 0.031 PCH-27X-186_LT 18 mH 10,5 0.30 51.7 0.085 0.031 PCH-27X-226_LT 22 mH 10,5 0.25 60.0 0.070 0.025 1. Please specify sleeve, tolerance, termination and packaging codes: PCH-27X-226KLT Sleeve X = No sleeve, S = Optional heat-shrink sleeve (not stocked) Tolerance: J = 5%, K = 10% (Table shows stock tolerances in bold.) Termination: L = RoHS compliant tin-silver over copper Special order: T = RoHS tin-silver-copper (95.5/4/0.5) or S = non-RoHS tin-lead (63/37). Packaging: T = 100 per tray R = Optional tape and reel (1000 per full 13″ reel) 2. Inductance tested at 15.75 kHz, 0.1 Vrms, 25°C ambient. 3. Tolerances in bold are stocked for immediate shipment. 4. DC current at which the inductance drops 10% (typ) from its value without current. 5. Rated current based on 300 circular mils per Amp. 6. Operating temperature range –40°C to +85°C. 7. Electrical specifications at 25°C. 8. Parts in bold type are included in Coilcraft Designer’s Kit No. P409. Axial Lead Power Chokes – PCH-27

+1-847-639-6400 sales@coilcraft.com +44-1236-730595 sales@coilcraft-europe.com +886-2-2264 3646 sales@coilcraft.com.tw +86-21-6218 8074 sales@coilcraft.com.cn + 65-6484 8412 sales@coilcraft.com.sg © Coilcraft Inc. 2013 This product may not be used in medical or high risk applications without prior Coilcraft approval. Specification subject to change without notice. Please check web site for latest information. Document 138-3 Revised 07/21/10 Part Inductance Percent SRF typ DCR max Isat4 Irms5 number 1 nom2 tolerance3 (MHz) (Ohms) (A) (A) PCH-45X-392KLT 3.9 µH 10 34 0.008 14.3 4.3 PCH-45X-472KLT 4.7 µH 10 31 0.009 13.0 4.3 PCH-45X-562KLT 5.6 µH 10 29 0.009 11.9 4.3 PCH-45X-682KLT 6.8 µH 10 26 0.010 11.0 4.3 PCH-45X-822KLT 8.2 µH 10 23 0.011 9.50 4.3 PCH-45X-103KLT 10 µH 10 20 0.012 8.93 4.3 PCH-45X-123KLT 12 µH 10 17 0.013 7.94 4.3 PCH-45X-153KLT 15 µH 10 14 0.015 7.15 4.3 PCH-45X-183KLT 18 µH 10 11 0.016 6.50 4.3 PCH-45X-223_LT 22 µH 10,5 10 0.017 5.95 4.3 PCH-45X-273_LT 27 µH 10,5 9 0.019 5.50 4.3 PCH-45X-333_LT 33 µH 10,5 9 0.021 4.93 4.3 PCH-45X-393_LT 39 µH 10,5 8 0.025 4.46 4.3 PCH-45X-473_LT 47 µH 10,5 7 0.035 4.08 3.4 PCH-45X-563_LT 56 µH 10,5 6 0.037 3.76 3.4 PCH-45X-683_LT 68 µH 10,5 5 0.044 3.40 2.7 PCH-45X-823_LT 82 µH 10,5 4 0.060 3.10 2.1 PCH-45X-104_LT 100 µH 10,5 3 0.086 2.80 1.7 PCH-45X-124_LT 120 µH 10,5 3 0.095 2.55 1.7 PCH-45X-154_LT 150 µH 10,5 3 0.14 2.30 1.3 PCH-45X-184_LT 180 µH 10,5 2 0.15 2.10 1.3 PCH-45X-224_LT 220 µH 10,5 2 0.17 1.90 1.3 PCH-45X-274_LT 270 µH 10,5 2 0.19 1.72 1.3 PCH-45X-334_LT 330 µH 10,5 2 0.21 1.55 1.3 PCH-45X-394_LT 390 µH 10,5 2 0.26 1.43 1.0 PCH-45X-474_LT 470 µH 10,5 1 0.32 1.30 1.0 PCH-45X-564_LT 560 µH 10,5 1 0.38 1.19 0.84 PCH-45X-684_LT 680 µH 10,5 1 0.51 1.08 0.67 PCH-45X-824_LT 820 µH 10,5 1 0.59 0.986 0.67 PCH-45X-105_LT 1.0 mH 10,5 1 0.69 0.893 0.67 PCH-45X-125_LT 1.2 mH 10,5 1 0.78 0.817 0.67 PCH-45X-106_LT 10 mH 10,5 0.30 9.10 0.282 0.16 PCH-45X-126_LT 12 mH 10,5 0.30 9.99 0.257 0.16 PCH-45X-156_LT 15 mH 10,5 0.30 11.2 0.230 0.16 PCH-45X-186_LT 18 mH 10,5 0.20 15.2 0.210 0.13 PCH-45X-226_LT 22 mH 10,5 0.20 16.8 0.190 0.13 PCH-45X-276_LT 27 mH 10,5 0.15 18.6 0.171 0.13 PCH-45X-336_LT 33 mH 10,5 0.15 26.7 0.155 0.10 PCH-45X-396_LT 39 mH 10,5 0.15 29.0 0.143 0.10 PCH-45X-476_LT 47 mH 10,5 0.10 31.8 0.131 0.10 PCH-45X-566_LT 56 mH 10,5 0.10 42.6 0.119 0.083 PCH-45X-686_LT 68 mH 10,5 0.10 46.9 0.108 0.083 PCH-45X-826_LT 82 mH 10,5 0.10 64.9 0.098 0.067 PCH-45X-107_LT 100 mH 10,5 0.10 71.7 0.099 0.067 1. Please specify sleeve, tolerance, termination and packaging codes: PCH-45X-107KLT Sleeve X = No sleeve, S = Optional heat-shrink sleeve (not stocked) Tolerance: J = 5%, K = 10% (Table shows stock tolerances in bold.) Termination: L = RoHS compliant tin-silver over copper Special order: T = RoHS tin-silver-copper (95.5/4/0.5) or S = non-RoHS tin-lead (63/37). Packaging: T = 100 per tray R = Optional tape and reel (1000 per full 13″ reel) 2. Inductance tested at 15.75 kHz, 0.1 Vrms, 25°C ambient. 3. Tolerances in bold are stocked for immediate shipment. 4. DC current at which the inductance drops 10% (typ) from its value without current. 5. Rated current based on 300 circular mils per Amp. 6. Operating temperature range –40°C to +85°C. 7. Electrical specifications at 25°C. 8. Parts in bold type are included in Coilcraft Designer’s Kit No. P409. Axial Lead Power Chokes – PCH-45