PCG0E472MCL1GS

PCG NICHICON | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 2

Technical content

CAT.8100H CONDUCTIVE POLYMER ALUMINUM SOLID ELECTROLYTIC CAPACITORS PCG Chip Type, Higher Capacitance Specifications Temperature Characteristics (Max.Impedance Ratio) Category Temperature Range Rated Voltage Range Rated Capacitance Range Capacitance Tolerance Tangent of loss angle (tan δ) ESR ( 1) Leakage Current ( 2) Performance CharacteristicsItem –55 to +105°C 2.5 to 16V 47 to 4700µF ± 20% at 120Hz, 20°C Less than or equal to the specified value at 120Hz, 20°C Less than or equal to the specified value at 100kHz, 20°C Less than or equal to the specified value. After 2 minutes' application of rated voltage at 20°C Endurance Damp Heat (Steady State) Resistance to Soldering Heat Marking The specifications listed at right shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 2000 hours at 105°C. The specifications listed at right shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 1000 hours at 60°C, 90% RH. After soldering the capacitor under the soldering conditions prescribed here, the capacitor shall meet the specifications listed at right. Pre-heating shall be done at 150 to 200°C and for 60 to 180 sec. The duration for over +230°C temperature at capacitor surface shall not exceed 60 seconds. In case peak temperature is 250°C or less, reflow soldering shall be two times maximum. In case peak temperature is 260°C or less, reflow soldering shall be once. Measurement for solder temperature profile shall be made at the capacitor top and the terminal. Navy blue print on the case top Capacitance change tan δ Leakage current ( 2) ESR ( 1) Within ± 20% of the initial capacitance value ( 3) 150% or less than the initial specified value 150% or less than the initial specified value Less than or equal to the initial specified value Capacitance change tan δ Leakage current ( 2) ESR ( 1) Within ± 20% of the initial capacitance value ( 3) 150% or less than the initial specified value 150% or less than the initial specified value Less than or equal to the initial specified value Capacitance change tan δ Leakage current ( 2) ESR ( 1) Within ± 10% of the initial capacitance value ( 3) 130% or less than the initial specified value 130% or less than the initial specified value Less than or equal to the initial specified value Higher Capacitance, Low ESR, High ripple current. Load life of 2000 hours at 105°C. SMD type : Lead free reflow soldering condition at 260°C peak correspondence. Compliant to the RoHS directive (2011/65/EU). AEC-Q200 compliant. Please contact us for details. 1 ESR should be measured at both of the terminal ends closest where the terminals protrude through the plastic platform. 2 Conditioning : If any doubt arises, measure the leakage current after the voltage treatment of applying DC rated voltage continuously to the capacitor for 120 minutes at 105°C. 3 Initial value : The value before test of examination of resistance to soldering. P C G J M C L G S Configuration Taping code Capacitance tolerance (±20%) Rated capacitance (470µF) Rated voltage (6.3V) Series name Type C G 4 7 0 j 8 4 1 H 0.3 MAX. φD±0.5 B±0.2 A±0.2 C±0.2 0.5 MAX. E LSeries Voltage ( j:6.3v) Plastic platform Lot No.Capacitance Negative Positive +0.1 -0.4 Dimensions Type numbering system (Example : 6.3V 470µF) Dimension table in next page. PCG PCF Higher Capacitance Voltage V 2.5 4 6.3 10 16 Code e g j A C Size φD L A B C E H φ5 × 6L 5.0 5.9 6.0 5.3 5.3 1.6 0.5 to 0.8 φ6.3 × 6L 6.3 5.9 7.3 6.6 6.6 2.1 0.5 to 0.8 φ8 × 7L 8.0 6.9 9.0 8.3 8.3 3.2 0.8 to 1.1 φ10 × 8L 10.0 7.9 11.0 10.3 10.3 4.6 0.8 to 1.1 φ10 × 10L 10.0 9.9 11.0 10.3 10.3 4.6 0.8 to 1.1 φ10 × 12.7L 10.0 12.6 11.0 10.3 10.3 4.6 0.8 to 1.1 (mm) Frequency coefficient of rated ripple current

0 Frequency0/

120Hz 1kHz 10kHz 100kHz or more 0.05 0.30 0.70 1.00

CAT.8100H CONDUCTIVE POLYMER ALUMINUM SOLID ELECTROLYTIC CAPACITORS PCG Dimensions Taping specifications are given in page 23. Recommended land size, soldering by reflow are given in page 18, 19. Please refer to page 3 for the minimum order quantity. Rated ripple current (mArms) at 105°C 100kHz 2.5 (0E) (1C) 18.4 (1A) 6.3 (0J) 11.5 7.2 (0G) 2.8 4.6 220 330 330 470 560 820 1500 2700 3300 4700 180 220 220 390 680 1200 2200 2700 3300 150 180 180 270 330 470 1000 1800 2200 2700 100 150 180 330 560 820 1000 1500 100 150 270 470 680 820 110 500 500 235 280 410 750 1350 1650 2350 144 300 300 312 544 960 1760 2160 2640 189 500 500 340 416 592 1260 2268 2772 3402 164 250 300 360 660 1120 1640 2000 3000 150 240 262 320 480 864 1504 2176 2624 2100 2200 3300 2900 3000 3300 4100 4700 5500 5600 1900 2000 2900 2700 3200 4000 4600 5300 5400 1800 1900 3000 2600 2700 3100 3800 4400 5000 5100 1700 1800 2500 2600 3100 3600 4300 4800 4900 1500 1600 2300 2400 2800 3300 3700 4100 4200 PCG0E221MCL1GS PCG0E331MCL1GS PCG0E331MCO1GS PCG0E471MCL1GS PCG0E561MCL1GS PCG0E821MCL1GS PCG0E152MCL1GS PCG0E272MCL1GS PCG0E332MCL1GS PCG0E472MCL1GS PCG0G181MCL1GS PCG0G221MCL1GS PCG0G221MCO1GS PCG0G391MCL1GS PCG0G681MCL1GS PCG0G122MCL1GS PCG0G222MCL1GS PCG0G272MCL1GS PCG0G332MCL1GS PCG0J151MCL1GS PCG0J181MCL1GS PCG0J181MCO1GS PCG0J271MCL1GS PCG0J331MCL1GS PCG0J471MCL1GS PCG0J102MCL1GS PCG0J182MCL1GS PCG0J222MCL1GS PCG0J272MCL1GS PCG1A820MCL1GS PCG1A101MCL1GS PCG1A151MCL1GS PCG1A181MCL1GS PCG1A331MCL1GS PCG1A561MCL1GS PCG1A821MCL1GS PCG1A102MCL1GS PCG1A152MCL1GS PCG1C470MCL1GS PCG1C560MCL1GS PCG1C820MCL1GS PCG1C101MCL1GS PCG1C151MCL1GS PCG1C271MCL1GS PCG1C471MCL1GS PCG1C681MCL1GS PCG1C821MCL1GS 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 × 6 5 × 6 5 × 6 6.3 × 6 6.3 × 6 8 × 7 10 × 8 10 × 10 10 × 12.7 10 × 12.7 5 × 6 5 × 6 5 × 6 6.3 × 6 8 × 7 10 × 8 10 × 10 10 × 12.7 10 × 12.7 5 × 6 5 × 6 5 × 6 6.3 × 6 6.3 × 6 8 × 7 10 × 8 10 × 10 10 × 12.7 10 × 12.7 5 × 6 5 × 6 6.3 × 6 6.3 × 6 8 × 7 10 × 8 10 × 10 10 × 12.7 10 × 12.7 5 × 6 5 × 6 6.3 × 6 6.3 × 6 8 × 7 10 × 8 10 × 10 10 × 12.7 10 × 12.7 Rated Capacitance (µF) Rated Voltage (V)(code) Surge Voltage (V) Leakage Current (µA) ESR (mΩ) (at 100kHz 20°C) Rated Ripple (mArms)tan δ Part NumberCase Size φD × L (mm)