PCE-5000 PCE | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 2
Technical content
Material Hardness Tester PCE-5000 PCE-5000 Material Hardness TesterUses the ASTM A1038 ultrasonic contact impedance (UCI) method for metal and alloy hardness testing PCE-5000 is a portable material hardness tester that uses the ASTM A1038 ultrasonic contact impedance (UCI) method to measure the hardness of metals and alloys with a minimum thickness of 2 mm / .08 in. Ultrasonic hardness testing is considered nondestructive, as it creates a microscopic indentation only visible when using a high-powered microscope. Featuring a quick 2-second measurement time, this UCI hardness tester is the ideal tool for weld inspection, hardness control of metal coatings and hardness measurement of fine-grained metals, small forgings, cast materials, heat-affected zones, ion-nitrided stamping dies and molds, forms, presses, thin-walled structures and parts, bearings, tooth flanks, pipes, tanks, steel sheets and products with intricate or complex shapes. Additional measuring sensors can be connected to the ultrasonic meter, which vary in their test force, which is applied to measure the hardness. The different sensors measure the hardness of the objects depending on the roughness of their surface. For example, the standard sensor with 20 N measures surfaces with a roughness of less than 5 µm. The 10 N sensor measures a roughness of less than 3.2 µm and the one with 98 N measures a roughness of less than 15 µm. Measures the hardness of metals and alloys with a minimum thickness of 2 mm / .08 in Displays measurements in Rockwell A (HRA), Rockwell B (HRB), Rockwell C (HRC), Brinell (HB), Vickers (HV) and MPa (N/mm²) SI units Measuring range: 61 … 85.6 HRA, 41 … 100 HRB, 20.3 … 68 HRC, 85 … 650 HB, 50 … 999 HV, 255 … 2180 MPa (N/mm²) Accuracy: ± 1.5 HR, ± 3% HB, ± 3% HV Stores up to 2000 measurement groups / 20 calibration sets to memory Provides measurements in just 2 seconds Probe fits into small spaces and hard-to-reach places Features a large and easy-to-read LCD screen, simple calibration and an RS-232 interface
Rockwell A B C 61 … 85.6 HRA, 41 … 100 HRB, 20.3 … 68 HRC Brinell 85 … 650 HB Vickers 50 … 999 HV Tensile strength 255 … 2180 N/mm² Accuracy Rockwell ± 1.5 HR Brinell ± 3% HB Vickers ± 3% HV General specifications Measurement methodUltrasoniccontact impedance (UCI) per ASTM A1038 Direction of measurement360° Measurement time 2seconds Hardness units HRA, HRB, HRC, HB, HV, MPa Display LCD with backlight Minimummaterial thickness 2mm Datamemory Upto 2000 measurement groups Up to 20 calibration sets Measurement probe20 N (standard) Probe cable length 1.5m / .06 in Functions Single value, min / max, average value Power supply 4.2V rechargeable battery, 4800-mAh Battery life Approx.10 hrs of operation at full charge (without backlight) Dimensions 162x 81 x 31 mm / 6.38 x 3.19 x 1.22 in Weight Approx. 755 g / 1.67 lb (including probe) More information Manual More product info Similar products