DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

FEATURES

PART NUMBER Input Voltage Maximum Maximum Maximum Minimum Zero Trigger Output Output Output Cross Current Currnet Voltage Voltage PCD210AC8-X 4-32 VDC 10 mA 10 Amps 250 VAC 50 VAC Y PCD215AC8-X 4-32 VDC 25 mA 15 Amps 250VAC 50 VAC Y PCD225AC8-X 4-32 VDC 25 mA 25 Amps 250 VAC 50 VAC Y PCD240AC8-X 4-32 VDC 25 mA 40 Amps 250 VAC 50 VAC Y PCD425AC8-X 4-32 VDC 25 mA 25 Amps 480 VAC 75 VAC Y PCD440AC8-X 4-32 VDC 25 mA 40 Amps 480 VAC 75 VAC Y Note: -X denotes Lead Free

Absolute Maximum Ratings at 25 Degrees C Parameter InputOutput Symbol Rating Unit Input signal voltage Drop out voltage RMS on state current Peak one cycle surge current Repetitive peak off state voltage Operating frequency Critical rate of rise on state current Load supply voltage Isolation voltage input to output Operating temperature Storage temperature Soldering temperature 10 seconds IN V V I I V f di/dt V V T T T do T surge out iso opr stg sol DRM 4-32 10, 15, 25, or 40 10x 600 *See note 2 47 - 70 250 *See Note 2 4000 -30 - 100 -30 - 125 260 C o C o C o Vrms Vrms AC Hz V A A rms V DC V DC A/ S Electrical Characteristics at 25 Degrees C Parameter InputOutput Symbol Conditions Unit Pick up voltage Input current On state voltage Operating current Leakage current Critical rate of rise of off state voltage Zero cross voltage Load voltage rating Minimum trigger current Isolation resistance input to circuit Turn on time Turn off time pu I V V I I dv/dt V V I R T T in T op out FT iso on off leak 25 mA MAX

50 TO 280VAC

1.5V rms MAX

5 TO 12 mA

Rth(j-c)IThermal resistance (between junction and case) It=1Arms Vin=4 - 32V It=1Arms Vout=240 Vrms Vout=240 Vrms 3.5 TO 7 mArms See Note 1 50 TO 200V/ S

35 VAC MAX

10 OHMS MIN

8.3 ms MAX 8.3 ms MAX I in =7mA I T =50mArms MIN VDRM =600V DC 500V 60Hz AC 60Hz AC C/W o 1.3 I T NOTES: 1. Output (dv/dt) protection is provided on all models. They are designed to switch resistive or inductive loads to 0.2 power factor. The dv/dt rating is based on a source impedance of 50 ohms. Model PCD425AC8-1 is rated 25 amps at 480 VAC. I surge is 250 amps and V DRM Is 1200 VOLTS. Vout Is 480 VAC. Model PCD440AC8-1 is rated 40 amps at 480 VAC. I surge is 400 amps and V DRM Is 1200 VOLTS. Vout Is 480 VAC. Sales: (888) 997-3933, (972) 713-6272 Fax: (972) 735-0964 email: sales@pickercomponents.com www.pickercomponents.com

3220 Commander Drive, Suite 102, Carrollton, Texas 75006

RMS On-state Current vs. Ambient Temperature 20100-30 30 40 50 60 70 80 90 100 110 Ambient temperature,Ta C o 20100-30 30 40 50 60 70 80 90 100 110 Case temperature,Tc C o RMS On-state Current vs. Case Temperature 40 80 120 160 200 240 Supply Voltage (Vrms) Ta=25 C o Open Circuit Leak Current vs. Supply Voltage Surge Current vs. Time 0.01 0.1 1 10 100 150 200 250 300 350 400 450 500 550 600 Time (SEC) CHARACTERISTIC CURVES f=60hZ Tj=25 C o RMS On State Current (A) Surge Current (A) Open Circuit Leak Current (mA rms) RMS On-state Current (A) Sales: (888) 997-3933, (972) 713-6272 Fax: (972) 735-0964 email: sales@pickercomponents.com www.pickercomponents.com

-30 02 0 4 0 6 0 100 0.5 1.5 2.5 3.5 4.5 Input Voltage (V) Ambient Temperature Ta ( C) Input Voltage vs. Ambient Temperature 10 20 30 40 50 60 100Input Current (mA) Input Voltage (VDC) Input Current vs. Input Voltage o CHARACTERISTIC CURVES LOAD12

25 AMP 250VAC

2.275 1.775 .800 1.85 LED SNAP ON SAFETY COVER STANDARD Dimensions in Inches Sales: (888) 997-3933, (972) 713-6272 Fax: (972) 735-0964 email: sales@pickercomponents.com www.pickercomponents.com