PCB.MMCXFSTJ.HT TAOGLAS | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

SPE-12-8-138/C/WY Page 1 of 3 SPECIFICATION Part No. : PCB.MMCXFSTJ.HT Product Name : MMCX(F) Jack – Vertical PCB Through Hole Jack Feature : MMCX(F) Jack Vertical PCB Through Hole Jack Frequency Range: DC up to 6GHz Finish: Gold Leg Length: 3.0mm Total Length: 7.5mm RoHS Compliant

SPE-12-8-138/C/WY Page 2 of 3 1. Introduction The PCB.MMCXFSTJ. HT connector was designed to be mounted on a PCB . The maximum thickness of PCB that the connector can be used with is 2.5mm. The connector pin is directly soldered onto pads on the PCB. The connector is a standard MMCX (F) Jack. Taoglas connectors are all RoHS compliant. 2. Specification ELECTRICAL Impedance 50Ω Frequency Range DC~6 GHz Working Voltage Max. ≤170 Vrms Dielectric withstanding Voltage 500 Vrms Insulation Resistance ≥1000M MΩ MECHANICAL Connector Dimension 7.5mm*3.5mm Max. Thickness PCB acceptable 2.5mm Connector Pin Diameter 0.7 mm Connector Type MMCX(F) Vertical PCB Thru Hole Jack ENVIRONMENTAL RoHS compliant Operating Temperature -40°C to +85°C

SPE-12-8-138/C/WY Page 3 of 3 3. Connector Drawing Name Material Finish QTY

1 Body Phosphor Bronze Gold 1

2 Insulator Teflon White 1

3 Female Contact Phosphor Bronze Gold 1

Taoglas makes no warranties based on the accuracy or completeness of the contents of this document and reserves the right to make changes to specifications and product descriptions at any time without notice. Taoglas reserves all rights to this document and the information contained herein. Reproduction, use or disclosure to third parties without express permission is strictly prohibited. Copyright © 2012, Taoglas Ltd.