PC782 PICKER | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

Micro Automotive Plug In / PCB Power Relay

FEATURES

1 A, 1 B and 1 C contact forms available

30 Amps continuous carrying capacity

Contact switching capacity up to 90 Amps Up to 125 degrees C operating temperature PC Board version available PC782 Max. Switching Voltage Current Dependent, see curve page 2

1 Form A, 1 Form B or 1 Form C

Operate Time 9 ms. typical Release Time Insulation Resistance 7 ms. typical 100 megohms min, at 500VDC, 50%RH Dielectric Strength 500 Vrms, 1 min. between coil and contacts Shock Resistance 20 g, 11ms, functional; 200 g, destructive Vibration Resistance DA 1.27 mm, 10 - 40 Hz; 40-70 Hz: 5 g; DA 0.5mm, 70-100 Hz; 100-500 Hz: 10 g. Power Consumption 1.6 W approx. Ambient Temperature Range -40 to 125 degrees C operating, -40 to 155 storage Weight Plug-In: 14 grams; PCB: 12 grams approx. Sales: Call Toll Free (888)997-3933 Fax (818) 342-5296 email: pickerwest@sbcglobal.net URL: pickercomponents.com

3220 Commander Drive, Suite 102, Carrollton, Texas 75006

ORDERING INFORMATION

Example: PC782 Model -1C Sockets available from Picker Components Contact Form Parallel Component CONTACT DATA Material Initial Contact Resistance Service Life Mechanical Electrical AgSnOInO (Silver Tin Oxide Indium Oxide) 100 milliohms max @ 0.1A, 6VDC

1 X 107

2 X 10 5

Nil: None; D: Diode; R: Resistor Coil Voltage -12 Contact Form Max Switching Current Break 30 Amps Make 90 Amps

30 Amps

AgNiO 15 (Silver Nickel Oxide 15%) Max. Continuous Current Minimum Load 0.1 A @ 12 VDC S Drop Resistance 1 Meter height drop on concrete 1A, 1B or 1C Normally Closed Break 15 Amps Make 20 Amps

20 Amps

Nil: Plug-IN; P: PCB Internal Diode or Resistor available Enclosure C: Dust Cover, S: Sealed Case

Sales: Call Toll Free (888) 997-3933 Fax (818) 342-5296 email: pickerwest@sbcglobal.net URL: pickercomponents.com Resistance ohms Nominal Operate 123 483 9.2 36.0 0.6 2.424 + 10% Allowable Voltage Max.

1 Form A & B1 Form C 1 Form A, B & C 1 Form C A, C, U, W

1.218.1 10.4 40.4 20.4 3.6 14.3 7.2 384

1 Form A & B

Voltage Max. Nominal Release Voltage Min. (11.5).453 (8.0).315 (6.0).236 (4.5) .177 (4.5) .177 85 87a 86 (11.5).453 (8.0).315 (7.0).275 (4.5) .177 (4.5) .177 85 87a 86 (15.5) .610 (26.0) 1.02 (23.0) .906 (0.8) .032 Typ. (6.3) .250 Terms. 30 & 87 (12.0).472 (4.8) .189 Terms. 85, 86 & 87a (5.7) .224 (2.5) .098 (2.2) .087 Terms. 85, 86 & 87a (2.5) .098 Terms. 30 & 87 87a 85 86 Wiring Diagram Tolerances + .010 unless otherwise noted Notes: Contact Form C shown On Contact Forms A & B Unused Pins are Omitted Maximum make current refers to inrush of a lamp load Make current of 120 Amps permissable with AgSnOInO contacts In 85 degree C ambient reduce maximum coil voltage to 72% Dimensions in Inches (millimeters) Bottom View PC Board Layout Plug-In Type PCB Type (-)(+)