PC563 PICKER | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

FEATURES

Handles from signal level to 5 amps

1 Form A contact form

200 milliwatt sensitive coil Ultra Slim, 7.2 MM package

4 Kv dielectric between coil and contacts

7 Kv surge voltage

General Use 5A at 30VDC / 250VAC All Forms UL/CSA RATINGS CHARACTERISTICS Operate Time 10 ms. Max. Release Time Insulation Resistance 4 ms. Max. 1000 megohms min, at 500VDC, 50%RH Dielectric Strength 4000 Vrms, 1 min. between coil and contacts Shock Resistance 10 g, 11ms, functional; 100 g, destructive Vibration Resistance DA 2.5 mm, 10 - 55 Hz Power Consumption 0.2W Ambient Temperature Range -30 to 70 C operating for class B, -40 to 130 C storage Weight 4 grams approx. Sales: Call Toll Free (888)997-3933 Fax (818) 342-5296 email: pickerwest@sbcglobal.net URL: pickercomponents.com

3220 Commander Drive, Suite 102, Carrollton, Texas 75006

Sealed, immersion cleanable CONTACT DATA Material Initial Contact Resistance Service Life Mechanical Electrical AgCdO+Au (Silver Cad Oxide Gold Clad) 100 milliohms max @ 0.1A, 6VDC

1 X 107

1 X 105

Resistive 5A at 30VDC / 250VAC Minimum Load 10 mA at 5 VDC 750 Vrms, 1 min. between open contacts File # E86876 AgCdO (Silver Cadmium Oxide)

ORDERING INFORMATION

Example: PC563 Model -1A Contact Form -12 Enclosure S: Sealed; C: Flux Free Coil Voltage S

Sales: Call Toll Free (888) 997-3933 Fax (818) 342-5296 email: pickerwest@sbcglobal.net URL: pickercomponents.com Tolerances + .010 unless otherwise noted Notes: Dimensions in Inches (millimeters) Side View End View COIL DATA Coil Voltage Resistance ohms + 10% Must Operate Voltage Max. (VDC) Must Release Voltage Min. (VDC) Continuous Voltage Max. (VDC) 125 180 720 1620 2880 3.75 4.5 9.00 13.5 18.0 0.5 0.6 1.2 1.8 2.4 5.5 6.6 13.2 19.8 26.4 Note: Custom coil voltages within the ranges shown are available on special order. 3 2.25 0.3 3.3 9 405 6.75 0.9 9.9 Wiring Diagram Drawings are 2X actual size .283 (7.2) (15.3) .602 (20.5) .807 (3.4) .134 (7.0) .275 (1.2) .047 Dia. 4 Places Hole Pattern Relays previously tested or used above 10mA at 6VDC or higher are not recommended for subsequent use in low level applications (11.5) .453 (4.7) .185 (4.7) .185 (7.0) .275 (11.5) .453