PC457 PICKER | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

FEATURES

Handles from signal level to 5 amps

1 Form A contact form

Ultra Slim, 5 MM package Terminals on 1/10 in grid pattern

2 Kv dielectric between coil and contacts

General Use 3A or 5A at 30VDC / 250VAC All Forms UL/CSA RATINGS CHARACTERISTICS Operate Time 6 ms. Max. Release Time Insulation Resistance 3 ms. Max. 1000 megohms min, at 500VDC, 50%RH Dielectric Strength 2000 Vrms, 1 min. between coil and contacts Shock Resistance 10 g, 11ms, functional; 100 g, destructive Vibration Resistance DA 2.5 mm, 10 - 55 Hz Power Consumption .12W Ambient Temperature Range -40 to 70 C operating for class B, -40 to 130 C storage Weight 3 grams approx. Sales: Call Toll Free (888)997-3933 Fax (818) 342-5296 email: pickerwest@sbcglobal.net URL: pickercomponents.com

3220 Commander Drive, Suite 102, Carrollton, Texas 75006

ORDERING INFORMATION

Example: PC457 Model -1A Sealed, immersion cleanable -12 CONTACT DATA Material Initial Contact Resistance Service Life Mechanical Electrical AgCdO+Au (Silver Cad Oxide Gold Clad) 100 milliohms max @ 0.1A, 6VDC

2 X 107

1 X 105

S: Sealed; C: Flux Free Contact Form Coil Voltage S -5 3A or 5A at 30VDC / 250VAC Minimum Load 0.1 mA @ 0.1 VDC 1000 Vrms, 1 min. between open contacts File # E86876 AgCdO (Silver Cadmium Oxide) Contact Rating 3: 3 AMP; 5: 5 AMP

Sales: Call Toll Free (888) 997-3933 Fax (818) 342-5296 email: pickerwest@sbcglobal.net URL: pickercomponents.com Tolerances + .010 unless otherwise noted Notes: Dimensions in Inches (millimeters) Side View End View COIL DATA Coil Voltage Resistance ohms + 10% Must Operate Voltage Max. (VDC) Must Release Voltage Min. (VDC) Continuous Voltage Max. (VDC) 208 300 1200 2700 3200 3.5 4.2 8.4 12.6 16.8 0.25 0.30 0.60 0.90 1.20 5.5 6.6 13.2 19.8 26.4 Note: Custom coil voltages within the ranges shown are available on special order. 3 2.2 0.15 3.3 9 675 6.3 0.45 9.9 Wiring Diagram Drawings are 2X actual size .197 (5.0) (12.5) .504 (1.1) .046 (20.0) .787 (3.5) .138 (2.54) .100 (10.16) .400 (5.08) .200 (2.54) .100 Grid Pattern (1.2) .047 Dia. 4 Places Hole Pattern Relays previously tested or used above 10mA at 6VDC or higher are not recommended for subsequent use in low level applications