PC435 PICKER | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

Subminature PCB Power Relay

FEATURES

10 Amp continous contact capacity

1 Form A & 1 form C contact forms

Class "B" insulation standard Subminature design Sensitive version available

4 Kv dielectric between coil and contacts

10 Amps @ 125 VAC

Operate Time 8 ms. Max. Release Time Insulation Resistance 5 ms. Max. 1000 megohms min, at 500VDC, 50%RH Dielectric Strength 4000 Vrms, 1 min. between coil and contacts Shock Resistance 10 g, 11ms, functional; 100 g, destructive Vibration Resistance DA 1.6 mm, 10 - 55 Hz Power Consumption .45 W Ambient Temperature Range -40 to 70 C operating for class B, -40 to 130 C storage Weight 7 grams approx. Sales: Call Toll Free (888)997-3933 Fax (818) 342-5296 email: pickerwest@sbcglobal.net URL: pickercomponents.com

3220 Commander Drive, Suite 102, Carrollton, Texas 75006

ORDERING INFORMATION

Example: PC435 Model -12 Sealed, immersion cleanable Contact Form 1A, 1C -1C CONTACT DATA Material Initial Contact Resistance Service Life Mechanical Electrical AgCdO (Silver Cadmium Oxide) 100 milliohms max @ 0.1A, 6VDC

1 X 107

1 X 105

S: Sealed; C: Flux Free Insulation System Nil: Class B (155 degrees C), F: Class F (125 degrees C) FS Nil: Standard .45 W, H: Sensitive .2 W

5 Amps @ 250 VAC, 30 VDC

1000 Vrms, 1 min. between open contacts File # E93379 General Use 1/4 HP @ 250 VAC Normally Closed Contact

5 Amps @ 125 VAC

3 Amps @ 250 VAC, 30 VDC

Resistance ohms Must Operate Voltage Max. (VDC) Must Release Voltage Min. (VDC) 180 320 720 1280 3.75 4.50 6.75 9.00 13.50 18.00 0.25 0.30 0.45 0.60 0.90 1.20 Sales: Call Toll Free (888) 997-3933 Fax (818) 342-5296 email: pickerwest@sbcglobal.net URL: pickercomponents.com Dimensions in Inches (millimeters) Side View End View + 10% Standard Coil Sensitive Coil 125 180 400 720 1620 2800 0.45 W 0.20 W 3 20 45 2.25 0.15 (15.3) .60 (7.6) (10.2) .40 (7.6) .30 .30 Bottom View PC Board Layout Wiring Diagram Tolerances + .010 unless otherwise noted Notes: Contact Form C shown On Contact Forms A & B Unused Pins are Omitted (15.7) .618 (20.5) .807 (4.0) .157 (10.6) .417 (1.3) .051 Dia. Typ.