PC384 PICKER | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

10 Amp Minature PCB Power Relay

FEATURES

10 Amp continous contact capacity

Class "B" insulation standard

2 KV dielectric between coil and contacts

Class "F" insulation available PC384 Load Type General Use 10 Amps @ 125 VAC, 5 Amps @ 250 VAC All Forms UL/CSA RATINGS CHARACTERISTICS Operate Time 10 ms. Max. Release Time Insulation Resistance 4 ms. Max. 250 megohms min, at 500VDC, 50%RH Dielectric Strength 2000 Vrms, 1 min. between coil and contacts Shock Resistance 10 g, 11ms, functional; 100 g, destructive Vibration Resistance DA 1.5 mm, 10 - 55 Hz Power Consumption .36 W Ambient Temperature Range -25 to 70 C operating for class B, -40 to 130 C storage Weight 8.6 grams approx. Sales: Call Toll Free (888)997-3933 Fax (818) 342-5296 email: pickerwest@sbcglobal.net URL: pickercomponents.com

3220 Commander Drive, Suite 102, Carrollton, Texas 75006

Sealed, immersion cleanable CONTACT DATA Material Initial Contact Resistance Service Life Mechanical Electrical AgSnO (Silver Tin Oxide) 50 milliohms max @ 0.1A, 6VDC

1 X 107

1 X 105

Max Switching Power 1250 VA, 280W 750 Vrms, 1 min. between open contacts File # E86876 AgCdO (Silver Cadmium Oxide) 4KV surge voltage

ORDERING INFORMATION

Example: PC384 Model -1C Contact Form 1A, 1C -12 Enclosure S: Sealed; C: Flux Free Coil Voltage S

Sales: Call Toll Free (888) 997-3933 Fax (818) 342-5296 email: pickerwest@sbcglobal.net URL: pickercomponents.com Dimensions in Inches (millimeters) Side View End View COIL DATA Coil Voltage Resistance ohms + 10% Must Operate Voltage Max. (VDC) Must Release Voltage Min. (VDC) Continuous Voltage Max. (VDC) 100 400 900 1600 3.5 4.2 8.4 12.6 16.8 0.5 0.6 1.2 1.8 2.4 5.5 6.6 13.2 19.8 26.4 Note: Custom coil voltages within the ranges shown are available on special order. 3 2.1 0.3 3.3 9 225 6.3 0.9 9.9 (15.0) .591 (22.5) .886 (3.5) .138 (19.0) .748 (22.5) .886 (7.5) .295 (7.5) .295 (5.0) .197 Drill .051 (1.3) 4 Places Tolerances + .010 unless otherwise noted Notes: Contact Form C shown On Contact Forms A & B Unused Pins are Omitted Bottom View PC Board Layout Wiring Diagram