PC27-09-0100A | DigiCamel IC Datasheet

Online Datasheet

Read PC27-09-0100A online.

PC27090100A ETC2 | Alldatasheet

Document overview

Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
PDF pages: 12

Technical content

© All Rights Reserved Taoglas Limited, Unit 3 Enniscorthy Technology Centre, Enniscorthy, Co. Wexford, Ireland www.taoglas.com SPECIFICATION Part No. : PC27.09.0100A Specification No : PC-2709-09 Product Name : TheStripe™ 850/900/1800/1900MHz GSM PCB Antenna W/100mm 1.13 Coaxial Cable MMCX (M) R/A connector Features : 34mm*7mm*0.8mm Photo : REVISION STATUS Version Date Page Revision Description Prepared Approved

01 Jan 02nd 2006 All New Product TW Product Centre Ronan Quinlan

02 Jan 29th 2010 1 Product Color Change TW Product Centre Ronan Quinlan

1.0 Introduction

This miniaturized low profile PCB antenna is based on smart TheStripe™ antenna technology. It consists of a PCB antenna and 1.13mm coaxial cable with MMCX(M) 90 degree connector.

2.0 Antenna Performance

VSWR 3.59 2.02 2.21 2.3 Return Loss -4.96 dB -9.48 dB -8.46 dB -8.06 dB Impedance 50 Ohm Radiation Pattern Omni-Directional Polarization Horizontal

3.0 Mechanical Dimensions

3.1 Dimensions and Drawing

3.2 Cable & Connector

3.2.1 RF Cable

Ø1.13 Coaxial Cable L = 100 +/- 3 mm

3.2.2 RF Connector MMCX (M) R/A

Y X Z Note : 1. The upper face of the PCB is in the Z axis 2. Connector positioning is towards the X direction

4.0 Antenna Electrical Characteristics

4.1 VSWR

4.2 Return Loss

5.0 Environmental Conditions and Reliability

5.1 Environmental Conditions

5.1.1 Operation Temperature -20°C to + 65°C

5.1.2 Storage Temperature -30°C to + 75°C

5.1.3 Relative Humidity 40% to 95%

5.2 Reliability

Test Items Procedure Requirement Thermal Shock Starting at -40 for 30minutes and then cycled to +85 to remain 30minutes (a complete cycle). To repeat 5 complete cycles. (Refer to IEC 68-2-14 Method Na) 1. The value of return loss must be within product specifications after this test. 2. No physical deformation should be evident. Storage Temperature (Cold) Samples must be put into -30°C chamber for 72 hours and samples shall be powered during test. (Refer to IEC 68-2-1 Method Aa) 1. The value of return loss must be within product specifications after this test. 2. No physical deformation should be evident. Storage Temperature (Dry Heat) Samples must be put into +75°C chamber for 72 hours and samples shall be powered during test. (Refer to IEC 68-2-1 Method Ba) 1. The value of return loss must be within product specifications after this test. 2. No physical deformation should be evident. Operating Temperature (Cold) Samples must be put into -20°C chamber for 2 hours and samples shall be powered during test. (Refer to IEC 68-2-1 Method Aa) 1. The value of return loss must met specification during test/after test 2. No mechanical defects after test. Operating Temperature (Dry Heat) Samples must be put into +65°C chamber for 72 hours and samples shall be powered during test. (Refer to IEC 68-2-1 Method Ba) 1. The value of return loss must met specification during test/after test 2. no mechanical defects after test.

6.0 Antenna Test Setup and Results

6.1 Equipment

Radiation Pattern Testing - Anechoic Chamber DUT Antenna

850 MHz

900 MHz

1800 MHz

1900 MHz

6.3 Chamber Testing - Tabular Results

7.0 Antenna Packaging

Product Information

PC27-09-0100A specifications and overview.

Summary

consists of a PCB antenna and 1.13mm coaxial cable with MMCX(M) 90 degree connector.

Description

consists of a PCB antenna and 1.13mm coaxial cable with MMCX(M) 90 degree connector.

Source title PC27-09-0100A Datasheet(PDF) - List of Unclassifed Manufacturers

Related Parts

More parts from the same family.

Browse manufacturer