PC10 PICKER | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

3220 Commander Drive, Suite 102 Carrollton, TX 75006 www.PickerComponents.com Sales: (972) 713-6272 (888) 997-3933 Fax: (972)735-0964 e-mail: sales@pickercomponents.com PCTxL Rev A 7/30/14 Dimensions are listed for reference purposes only. Specifications and Availability subject to change without notice.

50 Amp Latching PCB Relay PRELIMINARY PC10

FEATURES

 Energy Saving Latching Operation  50 Amp Switching Capacity  5,000 Watt Lamp Load  5 HP Motor Load  Max Inrush Current 500 Amp / 2 msec  4kV Dielectric Between Contacts and Coil  Single or Dual Coil Latching  Manual Topside Switch  39.0 x 25.0 x 15.0mm Package Dimensions, Narrowest in the Industry  Lead Free and RoHS Compliant UL/CSA Ratings at 25C (Pending) CONTACT DATA E93379 PC10 Voltage 1 Form A Load Type (SPST-NO) Resistive 6,000 Cycles 277 VAC 50 A Incandescent Lamp 3,000 Cycles 240 VAC 5,000 W Incandescent Lamp 3,000 Cycles 277 VAC 16 A Electronic Ballast 6,000 Cycles 280 VAC 16 A Motor Load 3,000 Cycles 277 VAC 5 HP Material AgSnO2 Service Life Initial Contact Resistance ≤ 20mΩ initial Electrical See Contact Data Maximum Switching Voltage 440VAC Mechanical 1 x 10⁶ Operations Maximum Switching Current 50 A Maximum Switching Power 12,500 VA COIL DATA—Dual Coil on Next Page Single Coil Resistance (Ohms ± 10%) Must Operate Pulse Coil Operate Reset Coil Voltage Voltage Max Magnitude Power Time Time Rated Maximum (VDC) (msec) (Watts) (msec) (msec) 6 7 24 4.8 ≥ 50 1.5 ≤ 15 ≤ 15 9 10.6 54 7.2 12 14.4 96 9.6 24 28.8 384 19.2 48 56 1,536 38.4

3220 Commander Drive, Suite 102 Carrollton, TX 75006 www.PickerComponents.com Sales: (972) 713-6272 (888) 997-3933 Fax: (972)735-0964 e-mail: sales@pickercomponents.com PCTxL Rev A 7/30/14 Dimensions are listed for reference purposes only. Specifications and Availability subject to change without notice. PCT90xL PCT90xL CHARACTERISTICS

ORDERING INFORMATION

Operate Time ≤ 15 msec Release Time ≤ 15 msec Insulation Resistance 1,000 MΩ min @ 500VDC Dielectric Strength Between Contact and Coil 50 Hz 4.000V 1 minute Between Contacts 50 Hz 1,500V 1 minute Creepage Distance 8 mm Shock Resistance Functional 98 m/s² 11 msec Survival 980 m/s² 11 msec Vibration Resistance 10-55 Hz Double Amplitude 1.5mm Terminal Strength 10 N Solderability 235⁰C ± 2⁰C 3 sec ± 0.5 sec Operating Temperature -40⁰C to +70⁰C Storage Temperature -40⁰C to +125⁰C Relative Humidity 85% at 40⁰C Weight 32 grams Example: PC10L -1A -12 D -X Model: PC10L Contact Form: 1A Coil Voltage: 3, 9, 12, 24, 48 Enclosure: Nil: Dust Cover Coil: Nil: Single Coil 1.5W, D: Double Coil 2x3.0 W Polarity: Nil: Standard, R: Reverse Polarity RoHS Compliant: -X Dual Coil Resistance (Ohms ± 10%) Must Operate Pulse Coil Operate Reset Coil Voltage Voltage Max Magnitude Power Time Time Rated Maximum (VDC) (msec) (Watts) (msec) (msec) 6 7 12 + 12 4.8 ≥ 50 2 x 3.0 ≤ 15 ≤ 15 9 10.6 27 + 27 7.2 12 14.4 48 + 48 9.6 24 28.8 192 + 192 19.2 48 56 768 + 768 38.4 COIL DATA—Continued

3220 Commander Drive, Suite 102 Carrollton, TX 75006 www.PickerComponents.com Sales: (972) 713-6272 (888) 997-3933 Fax: (972)735-0964 e-mail: sales@pickercomponents.com PCTxL Rev A 7/30/14 Dimensions are listed for reference purposes only. Specifications and Availability subject to change without notice. PCT90xL PCT90xL DIMENSIONS (mm / inches) SCHEMATIC PIN LAYOUT (mm / inches) NOTES: With the Dual Coil Version, the Latch and Reset Coils should not be pulsed at the same time for it is possible to set the rel ay into a magnetically neutral position. Coils should not be pulsed with less than the rated coil voltage and the pulse width should be a minimum of three times the specified operate time. If not, it is possible for the relay to settle in a magnetically neutral position. Must Operate Voltage is listed for test purposes only and is not to be used as design criteria. 1A 1A Reverse 1A Dual 1A Dual Reverse