PBYR30100PT

PBYR30100PT PHILIPS | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 5

Technical content

Philips Semiconductors Product specification Rectifier diodes PBYR30100PT series schottky barrier GENERAL DESCRIPTION QUICK REFERENCE DATA Dual, low leakage, platinum barrierSYMBOL PARAMETER MAX. MAX. MAX. UNIT schottky rectifier diodes in a plastic envelope featuring low forward PBYR30- 60PT 80PT 100PT voltage drop and absence of stored VRRM Repetitive peak reverse 60 80 100 V charge. These devices can withstand voltage reverse voltage transients and have VF Forward voltage 0.7 0.7 0.7 V guaranteed reverse surge capability. IO(AV) Output current (both 30 30 30 A The devices are intended for use in diodes conducting) switched mode power supplies and high frequency circuits in general where low conduction and zero switching losses are important. PINNING - SOT93 PIN CONFIGURATION SYMBOL PIN DESCRIPTION

1 Anode 1 (a)

2 Cathode (k)

3 Anode 2 (a)

tab Cathode (k) LIMITING VALUES Limiting values in accordance with the Absolute Maximum System (IEC 134). SYMBOL PARAMETER CONDITIONS MIN. MAX. UNIT -60 -80 -100 VRRM Repetitive peak reverse voltage - 60 80 100 V VRWM Crest working reverse voltage - 60 80 100 V VR Continuous reverse voltage Tmb ≤ 139 ˚C - 60 80 100 V IO(AV) Output current (both diodes square wave; δ = 0.5; - 30 A conducting)1 Tmb ≤ 124 ˚C IO(RMS) RMS forward current - 43 A IFRM Repetitive peak forward current t = 25 µs; δ = 0.5; - 30 A per diode T mb ≤ 124 ˚C IFSM Non-repetitive peak forward t = 10 ms - 180 A current per diode. t = 8.3 ms - 200 A sinusoidal; Tj = 125 ˚C prior to surge; with reapplied VRWM(max) I2t I 2t for fusing t = 10 ms - 162 A 2s IRRM Repetitive peak reverse current tp = 2 µs; δ = 0.001 - 1 A per diode. IRSM Non-repetitive peak reverse tp = 100 µs - 1 A current per diode. Tstg Storage temperature -65 175 ˚C Tj Operating junction temperature - 150 ˚C 1 2 3 tab k a1 a2 1 For output currents in excess of 20 A connection should be made to the exposed metal mounting base. October 1994 1 Rev 1.100

Philips Semiconductors Product Specification Rectifier Diode PBYR30100PT series Schottky Barrier THERMAL RESISTANCES SYMBOL PARAMETER CONDITIONS MIN. TYP. MAX. UNIT R th j-mb Thermal resistance junction to per diode - - 1.4 K/W mounting base both diodes - - 1.0 K/W R th j-a Thermal resistance junction to in free air. - 45 - K/W ambient STATIC CHARACTERISTICS Tj = 25 ˚C unless otherwise stated SYMBOL PARAMETER CONDITIONS MIN. TYP. MAX. UNIT VF Forward voltage (per diode) IF = 15 A; Tj = 125˚C - 0.61 0.70 V IF = 30 A; Tj = 125˚C - 0.74 0.85 V IF = 15 A; Tj = 25˚C - 0.77 0.85 V IR Reverse current (per diode) VR = VRWM ; Tj = 25 ˚C - 5.0 150 µA VR = VRWM ; Tj = 125 ˚C - 5.0 15 mA C d Junction capacitance (per f = 1MHz; VR = 5V; Tj = 25 ˚C to - 600 - pF diode) 125 ˚C October 1994 2 Rev 1.100

Philips Semiconductors Product specification Rectifier diodes PBYR30100PT series schottky barrier Fig.1. Maximum forward dissipation PF = f(IF(AV)) per diode; square current waveform where IF(AV) =IF(RMS) x √D. Fig.2. Maximum forward dissipation PF = f(IF(AV)) per diode; sinusoidal current waveform where a = form factor = IF(RMS) / IF(AV). Fig.3. Typical and maximum forward characteristic per diode; IF = f(VF); parameter Tj Fig.4. Typical reverse leakage current per diode; IR = f(VR ); parameter Tj Fig.5. Typical junction capacitance per diode; C d = f(VR ); f = 1 MHz; Tj = 25˚C to 125 ˚C. Fig.6. Transient thermal impedance per diode; Zth j-mb = f(tp). 0 20 PBYR30100PT IF(AV) / A PF / W20 Vo = 0.550 V Rs = 0.010 Ohms Tmb(max) / C 150 143 136 129 122 10 26 D = 1.0 0.5 0.2 0.1 D = tp tp T T I t 10 30 50 70 90 100 0.1 0.01 IR/ mA VR/ V PBYR30100PT 20 40 60 80 100 Tj/ C = 150 125 100 0 10 PBYR30100 IF(AV) / A PF / W a = 1.57 1.9 2.2 2.8 Vo = 0.550 V Rs = 0.010 Ohms 5 15 150 143 136 129 Tmb(max) / C 1 10 100 10000 1000 100 Cd/ pF VR/ V PBYR30100PT 0 1 2 PBYR30100PT VF / V IF / A 100 0.5 1.5 Tj = 25 C Tj = 125 C Typ Max 0.1 0.01 10us 1ms 0.1s 10s tp / s Zth j-mb (K/W) P tp t D October 1994 3 Rev 1.100

Philips Semiconductors Product Specification Rectifier Diode PBYR30100PT series Schottky Barrier MECHANICAL DATA Dimensions in mm Net Mass: 5 g Fig.7. SOT93; pin 2 connected to mounting base. Notes 1. Accessories supplied on request: refer to mounting instructions for SOT93 envelope. 2. Epoxy meets UL94 V0 at 1/8". 2 max 12.7 max 4.6 max max 0.4 1.6 0.5 min 13.6 min 4.4 5.5 1.15 0.95 0.5 M 2.2 max dimensions within this zone are uncontrolled 1 2 3 4.25 4.15 13.6 15.2 max October 1994 4 Rev 1.100

Philips Semiconductors Product specification Rectifier diodes PBYR30100PT series schottky barrier DEFINITIONS Data sheet status Objective specification This data sheet contains target or goal specifications for product development. Preliminary specification This data sheet contains preliminary data; supplementary data may be published later. Product specification This data sheet contains final product specifications. Limiting values Limiting values are given in accordance with the Absolute Maximum Rating System (IEC 134). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of this specification is not implied. Exposure to limiting values for extended periods may affect device reliability.

Application information

Where application information is given, it is advisory and does not form part of the specification.  Philips Electronics N.V. 1994 All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, it is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license under patent or other industrial or intellectual property rights. LIFE SUPPORT APPLICATIONS These products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Philips customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips for any damages resulting from such improper use or sale. October 1994 5 Rev 1.100