PBYR10100 PHILIPS | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 5

Technical content

Philips Semiconductors Product specification Rectifier diodes PBYR10100 series Schottky barrier FEATURES SYMBOL QUICK REFERENCE DATA

  • Low forward volt drop
  • Fast switching VR = 60 V/ 80 V/ 100 V
  • Reverse surge capability
  • High thermal cycling performance IF(AV) = 10 A
  • Low thermal resistance VF ≤ 0.7 V GENERAL DESCRIPTION PINNING SOD59 (TO220AC) Schottky rectifier diodes in a plasticPIN DESCRIPTION envelope. Intended for use as output rectifiers in low voltage, high 1 cathode frequency switched mode power supplies. 2 anode The PBYR10100 series is supplied tab cathode in the conventional leaded SOD59 (TO220AC) package. LIMITING VALUES Limiting values in accordance with the Absolute Maximum System (IEC 134) SYMBOL PARAMETER CONDITIONS MIN. MAX. UNIT PBYR10 60 80 100 VRRM Peak repetitive reverse - 60 80 100 V voltage VRWM Working peak reverse - 60 80 100 V voltage VR Continuous reverse voltage Tmb ≤ 139 ˚C - 60 80 100 V IF(AV) Average rectified forward square wave; δ = 0.5; Tmb ≤ 133 ˚C - 10 A current IFRM Repetitive peak forward square wave; δ = 0.5; Tmb ≤ 133 ˚C - 20 A current IFSM Non-repetitive peak forward t = 10 ms - 135 A current t = 8.3 ms - 150 A sinusoidal; T j = 125 ˚C prior to surge; with reapplied VRRM(max) IRRM Peak repetitive reverse pulse width and repetition rate - 1 A surge current limited by T j max Tj Operating junction - 150 ˚C temperature Tstg Storage temperature - 65 175 ˚C THERMAL RESISTANCES SYMBOL PARAMETER CONDITIONS MIN. TYP. MAX. UNIT R th j-mb Thermal resistance junction - - 2 K/W to mounting base R th j-a Thermal resistance junction in free air - 60 - K/W to ambient k a tab March 1998 1 Rev 1.200

Philips Semiconductors Product specification Rectifier diodes PBYR10100 series Schottky barrier

ELECTRICAL CHARACTERISTICS

Tj = 25 ˚C unless otherwise specified SYMBOL PARAMETER CONDITIONS MIN. TYP. MAX. UNIT V F Forward voltage I F = 10 A; Tj = 125˚C - 0.61 0.7 V IF = 20 A; Tj = 125˚C - 0.74 0.85 V IF = 20 A - 0.88 0.95 V IR Reverse current V R = VRWM - 5 150 µA VR = VRWM ; Tj = 125˚C - 5 15 mA C d Junction capacitance V R = 5 V; f = 1 MHz, Tj = 25˚C to 125˚C - 420 - pF March 1998 2 Rev 1.200

Philips Semiconductors Product specification Rectifier diodes PBYR10100 series Schottky barrier Fig.1. Maximum forward dissipation PF = f(IF(AV)); square current waveform where IF(AV) =IF(RMS) x √D. Fig.2. Maximum forward dissipation PF = f(IF(AV)); sinusoidal current waveform where a = form factor = IF(RMS) / IF(AV). Fig.3. Typical and maximum forward characteristic IF = f(VF); parameter Tj Fig.4. Typical reverse leakage current; IR = f(VR ); parameter Tj Fig.5. Typical junction capacitance; Cd = f(VR ); f = 1 MHz; Tj = 25˚C to 125 ˚C. Fig.6. Transient thermal impedance; Zth j-mb = f(tp). 0 10 PBYR10100 IF(AV) / A PF / W15 Vo = 0.550 V Rs = 0.015 Ohms 0.1 D = 1.0 0.5 0.2 Tmb / C 150 130 140 120 5 15 T I D = tp tp T t 0 50 100 100 0.1 0.01 IR / mA VR/ V PBYR10100 75 C 100 C 125 C 150 C Tj = 50 C 0 2 4 6 8 10 PBYR10100 IF(AV) / A PF / W a = 1.57 1.92.2 2.8 Vo = 0.550 V Rs = 0.015 Ohms Tmb / C 150 130 134 138 142 146 1 10 100 10000 1000 100 Cd/ pF VR/ V PBYR20100CT 0 1 2 PBYR10100 VF / V IF / A 0.5 1.5 Tj = 25 C Tj = 125 C Typ Max 1us 10us 100us 1ms 10ms 100ms 1s 10s0.001 0.01 0.1 PBYR10100pulse width, tp (s) Transient thermal impedance, Zth j-mb (K/W) D = tp tp T TP t D March 1998 3 Rev 1.200

Philips Semiconductors Product specification Rectifier diodes PBYR10100 series Schottky barrier MECHANICAL DATA Dimensions in mm Net Mass: 2 g Fig.7. SOD59 (TO220AC). pin 1 connected to mounting base. Notes 1. Refer to mounting instructions for TO220 envelopes. 2. Epoxy meets UL94 V0 at 1/8". 10,3 max 3,7 2,8 3,0 3,0 max not tinned 1,3 max (2x) 2,4 0,6 4,5 max 5,9 min 15,8 max 1,3 0,9 max (2x) 13,5 min 5,08 March 1998 4 Rev 1.200

Philips Semiconductors Product specification Rectifier diodes PBYR10100 series Schottky barrier DEFINITIONS Data sheet status Objective specification This data sheet contains target or goal specifications for product development. Preliminary specification This data sheet contains preliminary data; supplementary data may be published later. Product specification This data sheet contains final product specifications. Limiting values Limiting values are given in accordance with the Absolute Maximum Rating System (IEC 134). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of this specification is not implied. Exposure to limiting values for extended periods may affect device reliability.

Application information

Where application information is given, it is advisory and does not form part of the specification.  Philips Electronics N.V. 1998 All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, it is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license under patent or other industrial or intellectual property rights. LIFE SUPPORT APPLICATIONS These products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Philips customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips for any damages resulting from such improper use or sale. March 1998 5 Rev 1.200