PBW30F RSG | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 6

Technical content

MAX OUTPUT WATTAGE[W] *5 16.8 15.0 DC OUTPUT VOLTAGE[V] *6 t12 ( +24 ) t15 ( +30 ) CURRENT1[A] 0.7 0.5 CURRENT2[A] *5 1.4 1.0 SPECIFICATIONS MODEL PBW15F-12 PBW15F-15 INPUT VOLTAGE[V] AC85 - 264 1 f or DC110 - 370 (AC50 or DC70 Please refer to the instruction manual 2.1 Input voltage *8) CURRENT[A] ACIN 100V 0.40typ (CURRENT1) ACIN 200V 0.20typ (CURRENT1) FREQUENCY[Hz] 50/60 (47 - 440) or DC EFFICIENCY[%] ACIN 100V 74typ (CURRENT1) 78typ (CURRENT1) ACIN 200V 77typ (CURRENT1) 80typ (CURRENT1) INRUSH CURRENT[A] ACIN 100V 15typ (CURRENT1)( At cold start ) ACIN 200V 30typ (CURRENT1)( At cold start ) LEAKAGE CURRENT[mA] 0.15/0.30max (ACIN 100V/240V 60Hz, Io=100%, According to IEC60950-1,DENAN) OUTPUT VOLTAGE[V] t12 / ( +24V reference number ) t15 / ( +30V reference number ) CURRENT1[A] 0.7 / 0.7 0.5 / 0.5 CURRENT2[A] *5 1.4 / - 1.0 / - LINE REGULATION[mV] *9 60max / 96max 60max / 96max LOAD REGULATION 1[mV] *3 600max / 150max 600max / 150max LOAD REGULATION 2[mV] *4 *11 *11 *11 750max / - 750max / - RIPPLE[mVp-p] 0t o+ 5 0C*1 120max / 240max 120max / 240max - 1 0-0C*1 160max / 320max 160max / 320max RIPPLE NOISE[mVp-p] 0t o+ 5 0C*1 150max / 300max 150max / 300max - 1 0-0C*1 180max / 360max 180max / 360max TEMPERATURE REGULATION[mV] 0t o+ 5 0C 120max 150max -10 to +50C 150max 180max DRIFT[mV] *2 48max 60max START-UP TIME[ms] 200typ(ACIN 100V, Io=100%) *Start-up time is 700ms typ for less than 1minute of applying input again from turning off the input voltage. HOLD-UP TIME[ms] 20typ (ACIN 100V, Io=100%) OUTPUT VOLTAGE ADJUSTMENT RANGE[V] 9.60 - 13.2 (+V and -V are simultaneously adjusted ) 13.2 - 16.5 (+V and -V are simultaneously adjusted ) OUTPUT VOLTAGE SETTING[V] 11.5 - 12.5 (+V and -V CURRENT1 ) 14.4 - 15.6 (+V and -V CURRENT1 ) PROTECTION CIRCUIT AND OTHERS OVERCURRENT PROTECTION Works over 105% of rated current and recovers automatically OVERVOLTAGE PROTECTION[V] 16.8 - 24.0 20.0 - 29.0 OPERATING INDICATION LED (Green) REMOTE ON/OFF None ISOLATION INPUT-OUTPUT AC3,000V 1minute, Cutoff current = 10mA , DC500V 50MW min (At Room Temperature) INPUT-FG AC2,000V 1minute, Cutoff current = 10mA , DC500V 50MW min (At Room Temperature) OUTPUT-FG AC500V 1minute, Cutoff current = 25mA , DC500V 50MW min (At Room Temperature) ENVIRONMENT OPERATING TEMP.,HUMID.AND ALTITUDE -10 to +71C (Required Derating), 20 - 90%RH (Non condensing) 3,000m (10,000feet) max STORAGE TEMP.,HUMID.AND ALTITUDE -20 to +75C, 20 - 90%RH (Non condensing) 9,000m (30,000feet) max VIBRATION 10 - 55Hz, 19.6m/s2 (2G), 3minutes period, 60minutes each along X , Y and Z axis IMPACT 196.1m/s2 (20G), 11ms, once each X, Y and Z axis SAFETY AND NOISE REGULATIONS AGENCY APPROVALS (At only AC input) UL60950-1, C-UL(CSA60950-1), EN60950-1, EN50178 Complies with DEN-AN CONDUCTED NOISE Complies with FCC Part15 classB , VCCI-B, CISPR22-B, EN55011-B, EN55022-B HARMONIC ATTENUATOR Complies with IEC61000-3-2 (Not built-in to active filter *7) OTHERS CASE SIZE/WEIGHT 31X78X85mm [1.22X3.07X3.35 inches] (without terminal block)( WXHXD) / 200g max (without cover) COOLING METHOD Convection *12 *1 Measured by 20MHz oscilloscope or Ripple-Noise meter(equivalent to KEISOKU-GIKEN : RM101). *2 Drift is the change in DC output for an eight hour period after a half-hour warm-up at 25C. *3 Figures for 0 to rated current 1.The current not measured side is fixed. *4 Figures for 0 to rated current 2.The current not measured side is fixed. *5 The sum of +power -power must be less than output power. *6 t12,t15 can be used as +24 and +30. *7 When two or more units are used,they may not comply with the harmonic attenuator. Please contact us for details. *8 Derating is required. *9 Figures to rated current 1. *10Please contact us about safety approvals for the model with option. *11Please contact us about dynamic load and input response. *12Please contact us about class C. * Parallel operation with other model is not possible. * Derating is required when operated with cover. * A sound may occur from power supply at peak loading. PBW15F AC-DC Power Supplies Enclosed type PB W 15 F - O -O

Ordering information

6Optional *10 C :with Coating G :Low leakage current E :Low leakage current and EMI class A T :Vertical terminal block J :Connector type N :with Cover N1 :with DIN rail V :Output voltage setting potentiometer external- ly R 123456 PBA/PBW PBA/PBW-26 Recommended EMI/EMC Filter NAC-06-472 High voltage pulse noise type : NAP series Low leakage current type : NAM series *The EMI/EMC Filter is recommended *to connect with several devices. Cover is optional

2.5 Point A:C102 Mounting hole 2-M3 Mounting hole 2-M3 AC(N) AC(L) FG COM Cover name plate Cover (option) Name plate Terminal cover 34.5 34.5 36.5 70.5 12.2±1.5 31±0.5 60±0.5 11.5 9.5 7.5 16.5±2 15.1±1.5 22.6±1.5 PBA15F PBW15F LED Voltage adjust ¶ Tolerance : ±1 [±0.04] ¶ Weight : 200g max (without cover) ¶ PCB Material/thickness : CEM3 / 1.6mm [0.06] ¶ Chassis material : Electric galvanizing steel board ¶ Dimensions in mm, [ ]= inches ¶ Mounting torque : 0.6N • m(6.3kgf • cm)max ¶ Screw tightening torque : M3 0.8N • m(8.5kgf • cm)max ¶ Please connect safety ground to the unit in 2-M3 holes. ¶ External size of option T,J,N,N1 and V is different from standard model and refer to 7 Option of instruction manual for details. [0.71] [2.78] [0.3][0.37][0.45] [1.36][0.71] [1.22] [1.36] [3.07] [0.48] [0.59] [0.89] [0.1] [0.65] [3.35] [1.22] [2.36] [0.2] [1.44] PBA/PBW PBA/PBW-27 PBW15F Block diagram 2.5A AC250V AC IN COM DC OUT FG 85 - 264V NOISE FILTER INVERTERCONTROL CURRENT SENSING RECTIFIER AND FILTER RECTIFIER AND FILTER CONTROL Photocoupler Photocoupler TRANSFORMER INRUSH CURRENT LIMIT FUSE OVER VOLTAGE PROTECTION RECTIFIER AND FILTER External view

MODEL PBW30F-5 PBW30F-12 PBW30F-15 MAX OUTPUT WATTAGE[W] *5 15 31.2 30.0 DC OUTPUT VOLTAGE[V] *6 t5 ( +10 ) t12 ( +24 ) t15 ( +30 ) CURRENT1[A] 1.5 1.3 1.0 CURRENT2[A] *5 2.0 1.7 1.4 SPECIFICATIONS MODEL PBW30F-5 PBW30F-12 PBW30F-15 INPUT VOLTAGE[V] AC85 - 264 1 f or DC110 - 370 (AC50 or DC70 Please refer to the instruction manual 2.1 Input voltage *8) CURRENT[A] ACIN 100V 0.4typ (CURRENT1) 0.7typ (CURRENT1) ACIN 200V 0.25typ (CURRENT1) 0.4typ (CURRENT1) FREQUENCY[Hz] 50/60 (47 - 440) or DC EFFICIENCY[%] ACIN 100V 75typ (CURRENT1) 77typ (CURRENT1) 78typ (CURRENT1) ACIN 200V 75typ (CURRENT1) 81typ (CURRENT1) 79typ (CURRENT1) INRUSH CURRENT[A] ACIN 100V 15typ (CURRENT1)( At cold start ) ACIN 200V 30typ (CURRENT1)( At cold start ) LEAKAGE CURRENT[mA] 0.30/0.65max (ACIN 100V/240V 60Hz, Io=100%, According to IEC60950-1,DENAN) OUTPUT VOLTAGE[V] t5 / ( +10V reference number ) t12 / ( +24V reference number ) t15 / ( +30V reference number ) LINE REGULATION[mV] 20max / 36max 60max / 96max 60max / 96max LOAD REGULATION 1[mV] 250max / 100max 600max / 150max 600max / 150max LOAD REGULATION 2[mV] 500max / - 750max / - 750max / - RIPPLE[mVp-p] 0t o+ 5 0C*1 80max / 240max 120max / 240max 120max / 240max - 1 0-0C*1 140max / 320max 160max / 320max 160max / 320max RIPPLE NOISE[mVp-p] 0t o+ 5 0C*1 120max / 300max 150max / 300max 150max / 300max - 1 0-0C*1 160max / 360max 180max / 360max 180max / 360max TEMPERATURE REGULATION[mV] 0t o+ 5 0C 50max 120max 150max -10 to +50C 60max 150max 180max DRIFT[mV] *2 20max 48max 60max START-UP TIME[ms] 200typ(ACIN 100V, Io=100%) *Start-up time is 700ms typ for less than 1minute of applying input again from turning off the input voltage. HOLD-UP TIME[ms] 20typ (ACIN 100V, Io=100%) PROTECTION CIRCUIT AND OTHERS OVERCURRENT PROTECTION Works over 105% of rated current and recovers automatically OPERATING INDICATION LED (Green) REMOTE ON/OFF None ISOLATION INPUT-OUTPUT AC3,000V 1minute, Cutoff current = 10mA , DC500V 50MW min (At Room Temperature) INPUT-FG AC2,000V 1minute, Cutoff current = 10mA , DC500V 50MW min (At Room Temperature) OUTPUT-FG AC500V 1minute, Cutoff current = 25mA , DC500V 50MW min (At Room Temperature) ENVIRONMENT OPERATING TEMP.,HUMID.AND ALTITUDE -10 to +71C (Required Derating), 20 - 90%RH (Non condensing) 3,000m (10,000feet) max STORAGE TEMP.,HUMID.AND ALTITUDE -20 to +75C, 20 - 90%RH (Non condensing) 9,000m (30,000feet) max VIBRATION 10 - 55Hz, 19.6m/s2 (2G), 3minutes period, 60minutes each along X , Y and Z axis IMPACT 196.1m/s2 (20G), 11ms, once each X, Y and Z axis SAFETY AND NOISE REGULATIONS AGENCY APPROVALS (At only AC input) UL60950-1, C-UL(CSA60950-1), EN60950-1, EN50178 Complies with DEN-AN CONDUCTED NOISE Complies with FCC Part15 classB , VCCI-B, CISPR22-B, EN55011-B, EN55022-B HARMONIC ATTENUATOR Complies with IEC61000-3-2 (Not built-in to active filter *7) OTHERS CASE SIZE/WEIGHT 31X78X103mm [1.22X3.07X4.06 inches] (without terminal block)( WXHXD) / 270g max (without cover) COOLING METHOD Convection *11 *11 *11 *12 *1 Measured by 20MHz oscilloscope or Ripple-Noise meter(equivalent to KEISOKU-GIKEN : RM101). *2 Drift is the change in DC output for an eight hour period after a half-hour warm-up at 25C. *3 Figures for 0 to rated current 1.The current not measured side is fixed. *4 Figures for 0 to rated current 2.The current not measured side is fixed. *5 The sum of +power -power must be less than output power. *6 t5,t12,t15 can be used as +10,+24 and +30. *7 When two or more units are used,they may not comply with the harmonic attenuator. Please contact us for details. *8 Derating is required. *9 Figures to rated current 1. *10Please contact us about safety approvals for the model with option. *11Please contact us about dynamic load and input response. *12Please contact us about class C. * Parallel operation with other model is not possible. * Derating is required when operated with cover. * A sound may occur from power supply at peak loading. PBW30F AC-DC Power Supplies Enclosed type PB W 30 F - O -O 6Optional *10 C :with Coating G :Low leakage current E :Low leakage current and EMI class A T :Vertical terminal block J :Connector type N :with Cover N1 :with DIN rail V :Output voltage setting potentiometer external- ly R 123456 PBA/PBW PBA/PBW-28 Recommended EMI/EMC Filter NAC-06-472 High voltage pulse noise type : NAP series Low leakage current type : NAM series *The EMI/EMC Filter is recommended *to connect with several devices. Cover is optional

2.5 Mounting hole 2-M3 Mounting hole 2-M3 Point A:C102 Name plate Cover name plate Cover (option) Terminal cover AC(N) AC(L) FG COM 12.2±1.5 70.5 18 36.5 46±0.5 40.5 75±0.5 8.5 15.1±1.5 22.6±1.5 11.5 9.5 7.5 16.5±2 103 34.5PBW30F PBA30F ¶ Tolerance : ±1 [±0.04] ¶ Weight : 270g max (without cover) ¶ PCB Material/thickness : CEM3 / 1.6mm [0.06] ¶ Chassis material : Electric galvanizing steel board ¶ Dimensions in mm, [ ]= inches ¶ Mounting torque : 0.6N • m(6.3kgf • cm)max ¶ Screw tightening torque : M3 0.8N • m(8.5kgf • cm)max ¶ Please connect safety ground to the unit in 2-M3 holes. ¶ External size of option T,J,N,N1 and V is different from standard model and refer to 7 Option of instruction manual for details. LED Voltage adjust [0.71] [2.78] [0.48] [0.59] [0.89] [0.1] [0.3][0.37][0.45] [1.44] [3.07] [0.65] [4.06] [1.81] [1.59] [0.71] [1.22] [1.36] [2.95] [0.33] PBA/PBW PBA/PBW-29 PBW30F Block diagram 3.15A AC250V NOISE FILTER AC IN COM DC OUT FG 85 - 264V NOISE FILTER INVERTERCONTROL CURRENT SENSING RECTIFIER AND FILTER RECTIFIER AND FILTER CONTROL Photocoupler Photocoupler TRANSFORMER INRUSH CURRENT LIMIT FUSE OVER VOLTAGE PROTECTION RECTIFIER AND FILTER External view

MODEL PBW50F-5 PBW50F-12 PBW50F-15 MAX OUTPUT WATTAGE[W] *6 30 50.4 51 DC OUTPUT VOLTAGE[V] *8 t5 ( +10 ) t12 ( +24 ) t15 ( +30 ) CURRENT1[A] 3.0 2.1 1.7 CURRENT2[A] *6 4.0 2.7 2.4 SPECIFICATIONS MODEL PBW50F-5 PBW50F-12 PBW50F-15 INPUT VOLTAGE[V] AC85 - 264 1 f or DC120 - 370 (AC50 or DC70 Please refer to the instruction manual 2.1 Input voltage *3) CURRENT[A] ACIN 100V 0.45typ (CURRENT1) 0.70typ (CURRENT1) ACIN 200V 0.30typ (CURRENT1) 0.40typ (CURRENT1) FREQUENCY[Hz] 50/60 (4 7-6 3) EFFICIENCY[%] ACIN 100V 76typ (CURRENT1) 81typ (CURRENT1) 81typ (CURRENT1) ACIN 200V 77typ (CURRENT1) 83typ (CURRENT1) 83typ (CURRENT1) POWER FACTOR(Io=100%) ACIN 100V 0.98typ 0.99typ ACIN 200V 0.87typ 0.93typ INRUSH CURRENT[A] ACIN 100V 15typ (CURRENT1)( At cold start ) ACIN 200V 30typ (CURRENT1)( At cold start ) LEAKAGE CURRENT[mA] 0.40/0.75max (ACIN 100V/240V 60Hz, Io=100%, According to IEC60950-1,DENAN) OUTPUT VOLTAGE[V] t5 / ( +10V reference number ) t12 / ( +24V reference number ) t15 / ( +30V reference number ) LINE REGULATION[mV] 20max / 36max 48max / 96max 60max / 96max LOAD REGULATION 1[mV] *4 250max / 100max 600max / 150max 600max / 150max LOAD REGULATION 2[mV] *5 500max / - 750max / - 750max / - RIPPLE[mVp-p] 0t o+ 5 0C*1 80max / 240max 120max / 240max 120max / 240max - 1 0-0C*1 140max / 320max 160max / 320max 160max / 320max RIPPLE NOISE[mVp-p] 0t o+ 5 0C*1 120max / 300max 150max / 300max 150max / 300max - 1 0-0C*1 160max / 360max 180max / 360max 180max / 360max TEMPERATURE REGULATION[mV] 0t o+ 5 0C 50max 120max 150max -10 to +50C 60max 150max 180max DRIFT[mV] *2 20max 48max 60max START-UP TIME[ms] 350typ(ACIN 100V, Io=100%) HOLD-UP TIME[ms] 20typ (ACIN 100V, Io=100%) PROTECTION CIRCUIT AND OTHERS OVERCURRENT PROTECTION Works over 105% of rated current and recovers automatically OPERATING INDICATION LED (Green) REMOTE ON/OFF Optional (Required external power source ) ISOLATION INPUT-OUTPUT-RC *7 AC3,000V 1minute, Cutoff current = 10mA , DC500V 50MW min (At Room Temperature) INPUT-FG AC2,000V 1minute, Cutoff current = 10mA , DC500V 50MW min (At Room Temperature) OUTPUT-RC-FG *7 AC500V 1minute, Cutoff current = 100mA , DC500V 50MW min (At Room Temperature) ENVIRONMENT OPERATING TEMP.,HUMID.AND ALTITUDE -10 to +71C (Required Derating), 20 - 90%RH (Non condensing) 3,000m (10,000feet) max STORAGE TEMP.,HUMID.AND ALTITUDE -20 to +75C, 20 - 90%RH (Non condensing) 9,000m (30,000feet) max VIBRATION 10 - 55Hz, 19.6m/s2 (2G), 3minutes period, 60minutes each along X , Y and Z axis IMPACT 196.1m/s2 (20G), 11ms, once each X, Y and Z axis SAFETY AND NOISE REGULATIONS AGENCY APPROVALS (At only AC input) UL60950-1, C-UL(CSA60950-1), EN60950-1, EN50178 Complies with DEN-AN CONDUCTED NOISE Complies with FCC Part15 classB , VCCI-B, CISPR22-B, EN55011-B, EN55022-B HARMONIC ATTENUATOR Complies with IEC61000-3-2 OTHERS CASE SIZE/WEIGHT 31X82X120mm [1.22X3.23X4.72 inches] (without terminal block)( WXHXD) / 280g max (without cover) COOLING METHOD Convection *10 PBW50F AC-DC Power Supplies Enclosed type PB W 50 F - O -O 6Optional *9 C :with Coating G :Low leakage current (0.15mA max / ACIN 240V) E :Low leakage current and EMI class A (0.5mA max / ACIN 240V) T :Vertical terminal block J :Connector type R :with Remote ON/OFF N :with Cover N1 :with DIN rail V :Output voltage setting potentiometer external- ly R 123456 PBA/PBW PBA/PBW-30 Recommended EMI/EMC Filter NAC-06-472 High voltage pulse noise type : NAP series Low leakage current type : NAM series *The EMI/EMC Filter is recommended *to connect with several devices. *1 Measured by 20MHz oscilloscope or Ripple-Noise meter(equivalent to KEISOKU-GIKEN : RM101). *2 Drift is the change in DC output for an eight hour period after a half-hour warm-up at 25C. *3 Derating is required. *4 Figures for 0 to rated current 1.The current not measured side is fixed. *5 Figures for 0 to rated current 2.The current not measured side is fixed. *6 The sum of +power -power must be less than output power. *7 RC is applied to remote ON/OFF option. RC is isolated with input/output and FG. *8 t5,t12,t15 can be used as +10,+24 and +30. *9 Please contact us about safety approvals for the model with option. *10Please contact us about class C. * Parallel operation with other model is not possible. * Derating is required when operated with cover. * A sound may occur from power supply at peak loading. Cover is optional

¶ Tolerance : ±1 [±0.04] ¶ Weight : 280g max (without cover) ¶ PCB Material/thickness : CEM3 / 1.6mm [0.06] ¶ Chassis material : Aluminum ¶ Dimensions in mm, [ ]= inches ¶ Mounting torque : 0.49N • m(5kgf • cm)max ¶ Screw tightening torque : M3 0.8N • m(8.5kgf • cm)max ¶ Please connect safety ground to the unit in 2-M3 holes. ¶ External size of option T,J,R,N,N1 and V is different from standard model and refer to 7 Option of instruction manual for details. LED Voltage adjust PBW50F CN3 Connector for Remote ON/OFF (option) Cover name plate Cover (option) A Name plate Mounting hole 2-M3 Mounting hole 2-M3 AC(N) AC(L) FG COM Terminal cover Point A (16.5) 9.5(12) (20) (11) (71) (21.5) (14) 34.5 120 477±0.5 7.5 88 ±0.5 11 31 0.5 Pin No. Contents RC(+) RC(-) CN3 Option (Mfr : J.S.T.) Connector type Model B2B-XH-A Mating Connector (Terminal) XHP-2 BXH-001T-P0.6 or SXH-001T-P0.6 Barrier strip type [0.79] [0.65] [4.72] [3.03] [0.16] [0.43][3.46] [0.43] [2.8] [0.3][0.37][0.47] [1.38] [3.23] [0.71] [1.22] [1.36] [0.02] [0.55] [0.85] PBA/PBW PBA/PBW-31 PBW50F Block diagram FG CONTROL TRANSFORMER CONTROL +DC OUT NOISE FILTER -DC OUT INVERTER AC IN 85 - 264V FUSE RECTIFIER BOOSTER INDUCTER INVERTER CONTROL RC EXTERNAL SOURCE E OPTION 250V2A RECTIFIER AND FILTER RECTIFIER AND FILTER INRUSH CURRENT LIMIT RECTIFIER AND FILTER OVER VOLTAGE PROTECTION CURRENT SENSING CURRENT SENSING External view