PBSS2540F PHILIPS | Alldatasheet

Document overview

  • Manufacturer or author: Provided By www.digicamel.com(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 8

Technical content

Product specification 2001 Oct 31 DISCRETE SEMICONDUCTORS PBSS2540F

40 V low VCEsat NPN transistor

2001 Oct 31 2

Philips Semiconductors Product specification

40 V low VCEsat NPN transistor PBSS2540F

FEATURES

  • Low collector-emitter saturation voltage
  • High current capability
  • Improved thermal behaviour due to flat leads
  • Enhanced performance over SOT23 general purpose transistors.

APPLICATIONS

  • General purpose switching and muting
  • Low frequency driver circuits
  • Audio frequency general purpose amplifier applications
  • Battery driven equipment (mobile phones, video cameras, hand-held devices).

DESCRIPTION

NPN low VCEsat transistor in a SC-89 (SOT490) plastic package. PNP complement: PBSS3540F. MARKING TYPE NUMBER MARKING CODE PBSS2540F 2C PINNING PIN DESCRIPTION 1 base 2 emitter 3 collector handbook, halfpage MAM410 Top view Fig.1 Simplified outline (SC-89; SOT490) and symbol. QUICK REFERENCE DATA SYMBOL PARAMETER MAX. UNIT VCEO collector-emitter voltage 40 V IC collector current (DC) 500 mA ICM peak collector current 1 A R CEsat equivalent on-resistance <500 mΩ LIMITING VALUES In accordance with the Absolute Maximum Rating System (IEC 60134). SYMBOL PARAMETER CONDITIONS MIN. MAX. UNIT VCBO collector-base voltage open emitter − 40 V VCEO collector-emitter voltage open base − 40 V VEBO emitter-base voltage open collector − 6V IC collector current (DC) − 500 mA ICM peak collector current − 1A IBM peak base current − 100 mA Ptot total power dissipation T amb ≤ 25 °C − 250 mW Tstg storage temperature −65 +150 °C Tj junction temperature − 150 °C Tamb operating ambient temperature −65 +150 °C

2001 Oct 31 3

Philips Semiconductors Product specification Tamb =2 5°C unless otherwise specified. Note 1. Pulse test: tp ≤ 300 µs;δ≤ 0.02. SYMBOL PARAMETER CONDITIONS MAX. UNIT R th j-a thermal resistance from junction to ambient in free air 500 K/W SYMBOL PARAMETER CONDITIONS MIN. TYP. MAX. UNIT ICBO collector-base cut-off current VCB = 30 V; IE =0 −− 100 nA VCB = 30 V; IE = 0; Tj= 150°C −− 50 µA IEBO emitter-base cut-off current VEB =5V ; IC =0 −− 100 nA hFE DC current gain V CE =2V ; IC =1 0m A 2 0 0 −− VCE =2V ; IC = 100 mA; note 1 100 −− VCE =2V ; IC = 500 mA; note 1 50 −− VCEsat collector-emitter saturation voltage IC = 10 mA; IB = 0.5 mA −− 50 mV IC = 100 mA; IB =5m A −− 100 mV IC = 200 mA; IB =1 0m A −− 200 mV IC = 500 mA; IB = 50 mA; note 1 −− 250 mV R CEsat equivalent on-resistance I C = 500 mA; IB = 50 mA; note 1 − 380 <500 m Ω VBEsat base-emitter saturation voltage IC = 500 mA; IB = 50 mA; note 1 −− 1.2 V VBEon base-emitter turn-on voltage VCE =2V ; IC = 100 mA; note 1 −− 1.1 V fT transition frequency I C = 100 mA; VCE = 5 V; f = 100 MHz 250 450 − MHz C c collector capacitance V CB = 10 V; IE =Ie = 0; f = 1 MHz −− 6p F

2001 Oct 31 4

Philips Semiconductors Product specification handbook, halfpage 400 800 1200 200 600 1000 MHC082 10-1 1 hFE IC (mA) 102 103 (1) (2) (3) Fig.2 DC current gain as a function of collector current; typical values. VCE =2V . (1) Tamb = 150°C. (2) Tamb =2 5°C. (3) Tamb = −55 °C. handbook, halfpage 200 1200 400 600 800 1000 MHC085 10-1 11 0 VBE (mV) IC (mA) 102 103 (1) (2) (3) Fig.3 Base-emitter voltage as a function of collector current; typical values. VCE =2V . (1) Tamb = −55 °C. (2) Tamb =2 5°C. (3) Tamb = 150°C. handbook, halfpage103 102 MHC086 10-1 11 0 VCEsat (mV) IC (mA)102 103 (1) (2) (3) Fig.4 Collector-emitter saturation voltage as a function of collector current; typical values. IC /IB = 20. (1) Tamb = 150°C. (2) Tamb =2 5°C. (3) Tamb = −55 °C. handbook, halfpage 200 1200 400 600 800 1000 MHC084 10-1 11 0 VBEsat (mV) IC (mA) 102 103 (1) (2) (3) Fig.5 Base-emitter saturation voltage as a function of collector current; typical values. IC /IB = 20. (1) Tamb = 150°C. (2) Tamb =2 5°C. (3) Tamb = −55 °C.

2001 Oct 31 5

Philips Semiconductors Product specification handbook, halfpage 1200 400 800 1000 200 600 VCE (V) IC (mA) MHC083 (10) (2) (4) (6) (5) (3) (1) (8) (7) (9) Fig.6 Collector current as a function of collector-emitter voltage; typical values. (1) IB = 25 mA. (2) IB = 22.5 mA. (3) IB = 20 mA. (4) IB = 17.5 mA. (5) IB =1 5m A . (6) IB =1 2 . 5m A . (7) IB =1 0m A . (8) IB = 7.5 mA. (9) IB = 5.0 mA. (10) IB = 2.5 mA. handbook, halfpage 103 102 10-1 MHC087 10-1 1 R CEsat (W ) IC (mA) 102 103 (1) (2) (3) Fig.7 Collector-emitter equivalent on-resistance as a function of collector current; typical values. IC /IB = 20. (1) Tamb = 150°C. (2) Tamb =2 5°C. (3) Tamb = −55 °C.

2001 Oct 31 6

Philips Semiconductors Product specification UNIT b p cD E e1 H E Lp wv REFERENCESOUTLINE VERSION EUROPEAN PROJECTION ISSUE DATE 98-10-23 IEC JEDEC EIAJ mm 0.33 0.23 0.2 0.1 1.7 1.5 0.95 0.75 0.5 e 1.0 1.7 1.5 0.10.1 DIMENSIONS (mm are the original dimensions) 0.5 0.3 SOT490 SC-89 bp D e A Lp detail X H E E w M v M A B AB 0 1 2 mm scale A 0.8 0.6 c X Plastic surface mounted package; 3 leads SOT490

2001 Oct 31 7

Philips Semiconductors Product specification

  1. Please consult the most recently issued data sheet before initiating or completing a design. 2. The product status of the device(s) described in this data sheet may have changed since this data sheet was DATA SHEET STATUS (1) PRODUCT STATUS (2) DEFINITIONS Objective data Development This data sheet contains data from the objective specification for product development. Philips Semiconductors reserves the right to change the specification in any manner without notice. Preliminary data Qualification This data sheet contains data from the preliminary specification. Supplementary data will be published at a later date. Philips Semiconductors reserves the right to change the specification without notice, in order to improve the design and supply the best possible product. Product data Production This data sheet contains data from the product specification. Philips Semiconductors reserves the right to make changes at any time in order to improve the design, manufacturing and supply. Changes will be communicated according to the Customer Product/Process Change Notification (CPCN) procedure SNW-SQ-650A. DEFINITIONS Short-form specification The data in a short-form specification is extracted from a full data sheet with the same type number and title. For detailed information see the relevant data sheet or data handbook. Limiting values definition Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 60134). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of the specification is not implied. Exposure to limiting values for extended periods may affect device reliability. Application information Applications that are described herein for any of these products are for illustrative purposes only. Philips Semiconductors make no representation or warranty that such applications will be suitable for the specified use without further testing or modification. DISCLAIMERS Life support applications These products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. Philips Semiconductors customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips Semiconductors for any damages resulting from such application. Right to make changes Philips Semiconductors reserves the right to make changes, without notice, in the products, including circuits, standard cells, and/or software, described or contained herein in order to improve design and/or performance. Philips Semiconductors assumes no responsibility or liability for the use of any of these products, conveys no licence or title under any patent, copyright, or mask work right to these products, and makes no representations or warranties that these products are free from patent, copyright, or mask work right infringement, unless otherwise specified.

© Koninklijke Philips Electronics N.V. 2001 SCA73 All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license under patent- or other industrial or intellectual property rights. Philips Semiconductors – a worldwide company Contact information For additional information please visit http://www.semiconductors.philips.com. Fax: +31 40 27 24825 Printed in The Netherlands 613514/01/pp8 Date of release:2001 Oct 31 Document order number: 9397 750 08372