PBM200 XPPOWER | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
200 Watts
- Worldwide Medical Approvals
- Single, Dual, Triple and Quad Outputs
- Power Fail Detect
- Remote On/Off
- U-Channel and Enclosed Versions
- 100 Watt Convection-cooled Rating
- 3 Year Warranty PBM200 Series Input Input Voltage • 90-264 VAC Input Frequency • 47-63 Hz Input Current • 3.2 A rms at 115 VAC,
1.6 A rms at 230 VAC
Inrush Current • 20 A at 115 VAC, 40 A at 230 VAC cold start 25 °C Power Factor • 0.98 typical Earth Leakage Current• 90 µA max at 115 VAC/60 Hz 150 µA max at 230 VAC/50 Hz Input Protection • Internal T4 A/250 V in line and neutral Output Output Voltage • See table Output Voltage Trim • Not user-adjustable Initial Set Accuracy• ±2% Minimum Load • See table & note 5 Start Up Delay • 2 s max Start Up Rise Time • 18 ms typical Hold Up Time • 20 ms minimum at full load & 110 VAC Drift • ±0.2% Line Regulation • ±0.5% max Load Regulation • See note 7 Transient Response • 4% max deviation, recovery to within 1% in 500 µs for a 25% load change Ripple & Noise • 2% max pk-pk, 20 MHz bandwidth with a 22 µF electrolytic & a 0.47 µF tantalum capacitor Overvoltage Protection• 112-140% Vnom output 1 only, recycle input to reset Overtemperature • Shutdown at +85 °C (singles) or +105 °C Protection (multi outputs) with auto recovery, measured internally Overload Protection • 110-150% typical, auto recovery Short Circuit Protection• Trip and restart (Hiccup mode) Temperature • 0.04%/°C Coefficient Remote Sense • Single output models only. Compensates for up to 0.5 V drop Remote On/Off • On = Logic low or open circuit Off = Logic high xppower.com General Efficiency • 80% maximum Isolation • 4000 VAC Input to Output
1500 VAC Input to Ground
500 VAC Output to Ground
Switching Frequency • 100 kHz ±12 kHz Signals • Power fail detect, remote on/off Power Density • 4.76 W/In 3 Power Fail Detect • AC OK = TTL logic high AC not OK = TTL logic low MTBF • 350 kHrs to MIL-HDBK-217F at +25 °C, GB Environmental Operating Temperature• 0 °C to +70 °C, derate linearly from 100% power at +50 °C to 50% power at +70 °C Cooling • ‘C’ versions have internal fan, ‘B’ versions are derated with convection cooling or require 25 CFM (see note 4) Operating Humidity • Up to 95% RH, non-condensing Storage Temperature • -40 °C to +85 °C Operating Altitude • 2500 m Shock • Half sine pulse. acceleration 50 g, 11 ms duration, 3 shocks in each direction, unpackaged, non-operating Vibration • Sinusoidal 10-55 Hz, amplitude 0.15 mm, 30 min/axis, unpackaged, non-operating EMC & Safety Emissions • EN55011 & FCC Class B conducted & radiated Harmonic Currents • EN61000-3-2, Class A Voltage Flicker • EN61000-3-3 ESD Immunity • EN61000-4-2, level 3 Perf Criteria A Radiated Immunity • EN61000-4-3, level 3 Perf Criteria A EFT/Burst • EN61000-4-4, level 3 Perf Criteria A Surge • EN61000-4-5, level 3 Perf Criteria A Conducted Immunity • EN61000-4-6 3 V, Perf Criteria A Dips & Interruptions• EN61000-4-11, 30% 10 ms, 60% 100 ms, >95% 5000 ms, Perf Criteria A, B, B Safety Approvals • EN60601-1, UL60601-1, CSA22.2 No. 601-1 per cUL
- For U-bracket format, replace suffix ‘-C’ with suffix ‘-B’. 2. Output 2 peak current is 12 A on +12 V, 9 A on +15 V, and 6 A on +24 V. Maximum 2 s duration with total load <200 W. 3. Output 4 is floating and can be connected externally for positive or negative output. 4. 200 W for ‘-C’ version with a cover and fan assembly. 100 W for ‘-B’ version with convection cooling (maximum current of output 1 & 2 derated to 50%). 200 W for ‘-B’ version with 25 CFM forced air provided by user. 5. Zero minimum load for outputs 2, 3 & 4. 10% minimum load required on output 1 for all outputs to meet regulation. 6. When the Remote Sense facility is not used, +Sense must be connected to +V, and –Sense to return, on P2 connector. 7. Total regulation includes initial tolerance, line regulation and load regulation. 8. Peak current for single output models is 110% of Imax. Maximum 2 s duration with 10% duty cycle. Mechanical Details 7.00 (177.8) 1.00 (25.4) 3.00 (76.2) 0.50 0.50 (12.7) 0.85 (21.6) A L N G A A A AA AA 4.00 (101.6) 1.50 (38.1) 1.00 (25.4) A: Mounting holes. Threaded inserts for M3 0.5 screws (8 places) B B B: Mounting holes. Threaded inserts for 6.32" screws (8 places) B B B B B B 0.65 (16.5) 2.30 (58.4) 1 Notes 1. Dimensions shown in inches (mm). 2. Tolerance 0.02 [0.5] maximum. 3. Input connector P1 is Dinkle DT-35-B01W-03, output connector P2 is Dinkle DT-35-B01W-09 screws are M3, Nickel plated. 4. Connector P3 mates with Molex housing 22-01-1043 & Molex 40445 series crimp terminal. 5. Connectors P4 & P5 mate with Molex housing 22-01-1023 & Molex 40445 series crimp terminal. 6. P4 is for DC fan rated at 24 V/0.2 A (models PBM200PD03 & PD04), 5 V/0.38 A (PBM200PQ06), or 12 V/0.2 A (all other models). Pin 1 Fan+, pin 2 Fan-. 7. P5 is for Remote On/Off. Pin 1 is positive, pin 2 is return. approx. for ‘-C’ version. 9. Maximum mounting screw length from surface of chassis is 0.17 inch (4.3 mm) Conn Pin Model Number(s) PSXX PDXX PTXX (except 04) PT04 PQXX 1 -SENSE OP1 OP1 OP1 OP1
2 Return OP1 OP1 OP1 OP1
3 Return Com Ret Com Ret Com Ret Com Ret
4 Return Com Ret Com Ret Com Ret Com Ret
5 Return Com Ret Com Ret Com Ret Com Ret
6 OP1 OP2 OP2 OP2 OP2
7 OP1 N.C. OP3 N.C. OP3 8 OP1 N.C. N.C. OP4 Ret OP4 Ret 9 +SENSE N.C. N.C. OP4 OP4
1 Fan
2 Com Ret
3 Com Ret
4 PFD PFD PFD PFD PFD
Power (4) Output 1(8) Output 2(2,5) Output 3(5) Output 4(3,5) Model Number (1) Vnom Imin(5) Imax Reg (7) Vnom Imax Reg (7) Vnom Imax Reg (7) Vnom Imax Reg (7) 150 W 3.3 V 3.0 A 46.0 A 3% PBM200PS3V3-C 175 W 5.1 V 3.0 A 35.0 A 2% PBM200PS05-C 200 W 12.0 V 1.2 A 16.7 A 2% PBM200PS12-C 200 W 15.0 V 1.0 A 13.4 A 2% PBM200PS15-C 200 W 24.0 V 0.6 A 8.4 A 2% PBM200PS24-C 200 W 30.0 V 0.5 A 6.7 A 2% PBM200PS30-C 200 W 48.0 V 0.5 A 4.2 A 2% PBM200PS48-C 200 W +5.1 V 3.0 A 30.0 A 2% +12 V 8.0 A 4% PBM200PD01-C 200 W +5.1 V 3.0 A 30.0 A 2% +15 V 6.0 A 4% PBM200PD02-C 200 W +5.1 V 3.0 A 30.0 A 2% +24 V 4.0 A 4% PBM200PD03-C 200 W +12.0 V 1.0 A 8.7 A 2% +24 V 4.0 A 4% PBM200PD04-C