PBH34005

PBH MACOM | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 3

Technical content

Datasheet Rev. HC1 Issued 2008/03 www.tycoelectronics.com www.schrackrelays.com Dimensions are in mm unless otherwise specified and are shown for reference purposes only. Product specification according to IEC 61810-1. Product data, technical para- meters, test conditions and processing information only to be used together with the 'Definitions' at schrackrelays.com in the ‘Schrack’ section. Specifications subject to change. Miniature Power PCB Relay PBH 105°C I 1pole 6 A, 1 CO or 1 NO contact I Environmentally-friendly cadmium-free contacts I Class F coil system standard I For ambient temperatures up to 105°C I Product in accordance to IEC60335-1 I RoHS compliant (Directive 2002/95/EC) as per product date code 0346

Applications

White goods, domestic appliances F0224BB Approvals VREG.-Nr. 121560, ZE214025 Technical data of approved types on request Contact data Contact configuration 1 CO or 1 NO contact Contact set single contact Type of interruption micro disconnection Rated current 6 A Rated voltage / max.switching voltage AC 250/400 VAC Maximum breaking capacity AC 1500 VA Limiting making capacity, max 4 s, duty factor 10% 10 A Contact material AgNi 90/10 Mechanical endurance 2x10 6 cycles Rated frequency of operation with / without load 6/600 min -1 Contact ratings Type Load Cycles PBH14 6.5 A, 250 VAC, 105°C, resistive, 50Hz, EN61810-1 10x10 3 PBH14 (NO tested) 2 A, 250 VAC, 105°C, cos ϕ=0.55, 50Hz, EN61810-1 250x10 3 PBH14 (NO tested) 6.5 A, 250 VAC, 105°C, resistive, 50Hz, EN61810-1 100x10 3 PBH34 2 A, 250 VAC, 105°C, cos ϕ=0.55, 50Hz, EN61810-1 250x10 3 PBH34 6.5 A, 250 VAC, 105°C, resistive, 50Hz, EN61810-1 100x10 3 Coil data Rated coil voltage range DC coil 5...36 VDC Coil power DC coil typ. 360 mW Operative voltage range, % of rated coil voltage 90...100% Coil versions, DC-coil Coil Rated Operate Release Coil Rated coil code voltage voltage voltage resistance power VDC VDC VDC Ohm mW 005 5 3.75 0.5 70 +10% 357 006 6 4.5 0.6 100 +10% 360 009 9 6.75 0.9 225 +10% 360 012 12 9.0 1.2 400 +10% 360 018 18 13.5 1.8 900 +10% 360 022 22 16.5 2.2 1344 +10% 360 024 24 18.0 2.4 1600 +10% 360 048 48 36 4.8 6400 +10% 360 All figures are given for coil without preenergization, at ambient temperature +23°C Other coil voltages on request

Datasheet Rev. HC1 Issued 2008/03 www.tycoelectronics.com www.schrackrelays.com Dimensions are in mm unless otherwise specified and are shown for reference purposes only. Product specification according to IEC 61810-1. Product data, technical para- meters, test conditions and processing information only to be used together with the 'Definitions' at schrackrelays.com in the ‘Schrack’ section. Specifications subject to change. Miniature Power PCB Relay PBH 105°C (Continued) Insulation Dielectric strength coil-contact circuit 2500 V rms open contact circuit 1000 V rms Clearance / creepage coil-contact circuit CO version W 3/4 mm NO version W 4/5 mm Material group of insulation parts IIIa Tracking index of relay base CTI 250 Insulation to IEC 60664-1 Type of insulation coil-contact circuit basic open contact circuit functional Rated insulation voltage 250 V Pollution degree 3 Rated voltage system 230/400 V Overvoltage category III Other data RoHS - Directive 2002/95/EC compliant as per product date code 0346 Flammability class according to UL94 V-0 GWFI to IEC 60335-1 W 850°C GWIT to IEC 60335-1 W 775°C Ambient temperature range -20...105°C Operate- / release time < 20 ms Bounce time NO / NC contact < 15 ms Vibration resistance (function) NO / NC contact >10/4g, 30...400Hz Shock resistance (destruction) 100 g Category of protection RTII - flux proof Mounting pcb Resistance to soldering heat 270°C / 10 s Relay weight 5.4 g Packaging unit 35/1050 pcs PCB layout / terminal assignment Bottom view on solder pins Dimensions S0407-AA S0407-AB S0407-AC S0406-A 1) Layout note: No openings (e.g. holes, slots, cutouts, unused pins, open through connexions, etc.) allowed under the relay base. The relay base must be fully covered by the pcb, recommended minimum distance between the relay and the edge of the printed circuit board is 5 mm. For more information, please contact our application support.

Datasheet Rev. HC1 Issued 2008/03 www.tycoelectronics.com www.schrackrelays.com Dimensions are in mm unless otherwise specified and are shown for reference purposes only. Product specification according to IEC 61810-1. Product data, technical para- meters, test conditions and processing information only to be used together with the 'Definitions' at schrackrelays.com in the ‘Schrack’ section. Specifications subject to change. Miniature Power PCB Relay PBH 105°C (Continued) Product key PB H 4 Type Version H High temperature version Contact configuration 1 1 CO contact 3 1 NO contact Contact material

4 AgNi 90/10

Coil code: please refer to coil versions table Other types on request Product key Version Contacts Contact material Coil Part number PBH14005 high 1 CO contact AgNi 90/10 5 VDC 9-1415356-1 PBH14006 temperature 6 VDC 8-1415356-1 PBH14009 version 9 VDC 7-1415356-1 PBH14012 12 VDC 6-1415356-1 PBH14018 18 VDC 6-1415357-1 PBH14022 22 VDC 7-1415357-1 PBH14024 24 VDC 6-1415355-1 PBH14036 36 VDC 9-1415355-1 PBH34005 1 NO contact 5 VDC 5-1415356-1 PBH34006 6 VDC 4-1415356-1 PBH34009 9 VDC 3-1415356-1 PBH34012 12 VDC 2-1415356-1 PBH34018 18 VDC 8-1415357-1 PBH34022 22 VDC 9-1415357-1 PBH34024 24 VDC 1-1415356-1 PBH34036 36 VDC 0-1415356-1