PBEFP46T5X

D10_V05 BANNER | Alldatasheet

Document overview

• Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
• PDF pages: 42

Technical content

163More information online at bannerengineering.com Fiber Systems Fiber Optic Systems  Advanced amplifier for use with plastic fibers  High-performance, low-contrast sensing  Easy-to-set TEACH programming  Manual adjustment capability for fine tuning  4-digit display of signal strength and operating status  Visible red or visible green sensing beam  Fiber Systems Explained  When to Use Fiber Systems  Selection information for sensors and fibers  Choosing Plastic or Glass Fibers  Glass and plastic fiber optic models  Models for standard applications, high-speed response and increased power  AC-coupled for high-sensitivity applications  Green, blue, white, red or infrared LED colors  For mounting flat or to a 35 mm DIN rail  Models for glass and plastic fiber optics  Low-profile design to mount directly on equipment  8-segment LED status bar for signal strength, sensing contrast, programming status and diagnostic warnings  Completely sealed, IP67 point-of-use or inline fiber optic amplifier  Inexpensive and easily cut to length during installation  Very bendable, for a precise fit  Available coiled, for applications requiring articulated or reciprocating motion  Diameters of 0.25, 0.5, 1.0 or 1.5 mm  For hostile environments: high temperatures, corrosive materials, extreme moisture and high levels of shock and vibration  Inherent immunity to extreme electrical noise  Quickly custom designed and built for your unique applications

164 More information online at bannerengineering.com Fiber Systems Two-part fiber systems include the sensor and the separately purchased application-specific fiber. 1. Sensors The sensor contains all the electronics, the amplifier and the mechanical interface to the fiber. Some models are sealed and rated IP67 to mount directly on a machine; other are designed to be DIN-rail mounted in a centralized control enclosure. 2. Fibers Sensing fibers are non-electronic, light-transmitting, optical- quality glass or plastic strands encased in cladding that reflects light to the core. Fibers transmit and/or receive light from the LED of a sensor. Glass fibers are arranged in bundles, and plastic fibers are typically packaged as monofilaments with a protective jacket of polyethylene, PVC, stainless-steel braid or other material. Fiber sensing tips have a wide variety of shapes and configurations. When to Use Fiber Systems  Confined areas. The small size and flexibility of fibers allows precise positioning where space is limited.  High temperatures. Fiber optic assemblies can tolerate elevated temperatures—in some cases as high as 480° C.  High vibration and shock. The low mass of fibers enables them to withstand extreme vibration and mechanical shock.  Corrosive and wet environments. Special purpose fibers withstand corrosive materials, moisture and even repeated washdown.  Explosive environments. Fibers are passive and can safely pipe light to and from hazardous areas.  Noisy environments. Fibers are non-electronic mechanical components and are completely immune to electrical noise.  Unique target shapes and requirements. Fiber optic sensing heads can be custom designed and optimally shaped to the physical and optical requirements of a specific application. Typical Applications  Punch presses  Tablet counting  Vibratory feeders  Ovens  Conveyors  Semiconductor processing equipment  Web control  Liquid level Compare & select fiber optic sensors online: www.bannerengineering.com/iselect System Overview The broadest selection of fiber sensors in the world. Sensor Model Models for Plastic Fibers Page Number Models for Glass Fibers Page Number WORLD-BEAM® page 70 page 70 MINI-BEAM® page 77 page 77 Q23/QH23 page 90 QM42 page 136 Q45 page 142 page 142 OMNI-BEAM® page 155 page 155 D10 page 166 D12 page 172 page 172 R55F page 177 page 177 FI22 page 180 D11 page 32 ECONO-BEAM® page 32 page 32 MAXI-BEAM® page 33 page 33 MULTI-BEAM® page 33 PC44 See data sheet p/n 32910 VALU-BEAM® page 32 page 32 SM512 page 33 SETUP DO LO OFF DelaySwitch Point DYN AMIC STATIC SETUP DO LO OFF Delay Switch Point DYNAMIC STATIC D11 ON

165More information online at bannerengineering.com Plastic fibers are for general purpose use. They tolerate severe flexing, can be cut to length in the field and cost less than glass fibers. Glass fibers are the best choice for challenging environments such as high temperatures, corrosive materials and moisture. Core–Thin glass or plastic center of the fiber through which light travels. Cladding–Outer optical material surrounding the core that reflects light back into the core. Jacket–Protective layer to protect plastic fiber from damage and moisture. Choosing Plastic or Glass Fibers Fiber Construction Glass Plastic  Inexpensive and easily cut to length during installation  Bend for a precise fit  Available in high-flex models to withstand flexing  Offered with special jackets that withstand corrosion, impact and abrasion  Available in coiled versions for applications requiring articulated or reciprocating motion  Available in diameters of 0.25, 0.5, 1.0 or 1.5 mm  Can be quickly custom designed and built for your unique applications  Solve numerous challenging sensing requirements  Ideal for hostile environments such as high temperatures to 480° C, corrosive materials and extreme moisture  Withstand high levels of shock and vibration  Inherently immune to extreme electrical noise  Available with choice of sheathings: standard stainless-steel flexible conduit, PVC or other flexible tubing.  Can be quickly custom designed DURA-BEND ™ for extremely tight radius bends Fluoropolymer encapsulated fibers Focused beam fibers Convergent beam fibers Linear array fibers Liquid level detection fibers High temperature fibers S TEELSKIN™ for impact, abrasion Specialty fibers for specific sensing applications. System Overview

166 More information online at bannerengineering.com PLASTIC FIBER D10 Series Redefining High-Performance Fiber Optic Sensing  Features advanced fiber optic amplifier for use with plastic fibers  Available with visible red or green beam  Delivers high-performance, low-contrast sensing with automatic TEACH options or manual adjustment  Available in bipolar, dual-discrete, and analog/ discrete output models Expert Models:  4-digit TEACH and signal strength display or bargraph readout  Operating status indicators  Easy-to-set static, dynamic and single-point programming  Manual fine tuning  Remote configuration, using TEACH wire D10 Series BRACKETS PAGE 350 QD CABLES PAGE 378 & 379 4- & 6-Pin Pico Expert Dual-Discrete Outputs  Two configurable individual setpoints  Current sourcing (PNP) or current sinking (NPN) Expert Analog & Discrete Outputs  Two configurable individual setpoints: one for analog and one for discrete output  Current sourcing (PNP) or current sinking (NPN)  One 4-20 mA current analog output or 0-10V dc voltage analog output Expert Advanced LED Display  Configuration and performance indicator  Quick and easy setup  Constant status monitoring in RUN mode Discrete Discrete Analog Discrete D10 Expert with Numeric Display  Numeric display of signal strength and operating status  Two output options: two discrete outputs in the same sensor; or discrete output and either a 4-20 mA current or a 0-10V dc voltage analog output in the same sensor D10 Expert with Bargraph Display  Easy-to-read 8-segment light bar display indicator for TEACH and signal strength  Bipolar discrete outputs: one current sourcing (PNP) and one current sinking (NPN) D10 Discrete Output  15-turn manual sensitivity adjustment  Pulse rate LED indicator for signal strength  Bipolar discrete outputs: one current sourcing (PNP) and one current sinking (NPN) PLASTIC FIBERS PAGE 182

167More information online at bannerengineering.com D10 Series D10 Expert™ with Numeric Display—Dual Discrete, 12-24V dc Models Sensing Mode/LED* Range Cable** Outputs Data Sheet D10DNFP PLASTIC FIBER Range varies by Power Level/Speed Selection used and with fiber optics used. See data sheet part number 64154 for range information. 2 m Dual NPN 64154 D10DNFPQ 6-pin Pico QD D10DPFP 2 m Dual PNPD10DPFPQ 6-pin Pico QD D10DNFPG PLASTIC FIBER 2 m Dual NPND10DNFPGQ 6-pin Pico QD D10DPFPG 2 m Dual PNPD10DPFPGQ 6-pin Pico QD D10 Expert™ with Numeric Display—Analog/Discrete, 12-24V dc Models Sensing Mode/LED* Range Cable Discrete Output Analog Output Data Sheet D10INFP PLASTIC FIBER Range varies by Power Level/Speed Selection used and with fiber optics used. See data sheet part number 65448 for range information. 2 m NPN 4-20 mA 65448 D10INFPQ 6-pin Pico QD D10IPFP 2 m PNPD10IPFPQ 6-pin Pico QD D10INFPG PLASTIC FIBER 2 m NPN 4-20 mA D10INFPGQ 6-pin Pico QD D10IPFPG 2 m PNPD10IPFPGQ 6-pin Pico QD Visible Red LED Visible Green LED For 9 m cable, add suffix W/30 to the 2 m model number (example, D10DNFP W/30 ). A model with a QD requires a mating cable (see page 379). Static and dynamic programming push buttons or manual gain potentiometer Informative signal-strength readout with LED display, bargraph display or mechanical indicator Output indicators 2 m or 9 m integral cable, or Pico-style quick disconnect D10 Sensors 35.9 mm 10.0 mm Detailed Dimensions Download PDF Download PDF 68.1 mm D10 Expert Models with Numeric Display 10.0 mm 68.1 mm 39.5 mm L O DO 0 ms 40 ms + + - - DE L A Y 10.0 mm 39.5 mm 68.1 mm D10—Discrete Models D10 Expert Models with Bargraph Display

168 More information online at bannerengineering.com D10 Series D10 Expert™ with Numeric Display—Analog/Discrete, 15-24V dc Models Sensing Mode/LED* Range Cable** Output Type Analog Output Data Sheet D10UNFP PLASTIC FIBER Range varies by Power Level/Speed Selection used and with fiber optics used. See fibers section on page 182 or reference data sheet part number 65448 for range information. 2 m NPN 0-10V 65448 D10UNFPQ 6-pin Pico QD D10UPFP 2 m PNPD10UPFPQ 6-pin Pico QD D10UNFPG PLASTIC FIBER 2 m NPN 0-10V D10UNFPGQ 6-pin Pico QD D10UPFPG 2 m PNPD10UPFPGQ 6-pin Pico QD D10 Expert™ with Bargraph Display—Discrete, 10-30V dc Models Sensing Mode/LED* Range Cable** Output Type Excess Gain Beam Pattern Data Sheet D10BFP PLASTIC FIBER Range varies by Power Level/Speed Selection used and with fiber optics used. See fibers section on page 182 or reference data sheet part number 117830 for range information. 2 m Bipolar NPN/PNP EGCP-28 to EGCP-31 (p. 448) BPP-28 to BPP-31 (p. 466) 117830 D10BFPQ 6-pin Pico QD D10BFPG PLASTIC FIBER 2 m EGCP-32 to EGCP-35 (pp. 448- 449) BPP-32 to BPP-35 (pp. 466- 467)D10BFPGQ 6-pin Pico QD D10—Discrete, 10-30V dc Models Sensing Mode/LED* Range Cable Output Type Data Sheet D10AFP PLASTIC FIBER Range varies by Power Level/Speed Selection used and with fiber optics used. See fibers section on page 182 or reference data sheet part number 118431 for range information. 2 m Bipolar NPN/PNP 118431 D10AFPQ 4-pin Pico QD D10AFPG PLASTIC FIBER 2 m D10AFPGQ 4-pin Pico QD D10AFPY PLASTIC FIBER Range varies by Power Level/Speed Selection used and with fiber optics used. See fibers section on page 182 or reference data sheet part number 118431 for range information. 2 m D10AFPYQ 4-pin Pico QD D10AFPGY PLASTIC FIBER 2 m D10AFPGYQ 4-pin Pico QD Visible Red LED Visible Green LED For 9 m cable, add suffix W/30 to the 2 m model number (example, D10DUNFP W/30 ). A model with a QD requires a mating cable (see pages 378 and 379). Download PDF Download PDF Download PDF HIGH-SPEED HIGH-SPEED

169More information online at bannerengineering.com D10 Series D10 Expert™ with Numeric Display—Dual-Discrete Specifications Required Fiber Optic Cable Banner P-Series plastic fibers (See Plastic Fiber Optic section, page 182) Supply Voltage and Current 12 to 24V dc (10% max. ripple) at less than 65 mA, exclusive of load Supply Protection Circuitry Protected against reverse polarity and transient voltage. Output Configuration Two independently configured current sourcing (PNP) or current sinking (NPN) solid-state transistors. Output Rating 150 mA max. load OFF-state leakage current: less than 10 µA at 24V dc ON-state saturation voltage: NPN less than 1.5V at 150 mA load PNP less than 2.5V at 150 mA load Output Protection Circuitry Protected against false pulse on power-up and continuous short-circuit Output Response Time Programmable, 50 microseconds, 200 microseconds, 1 millisecond, 2.5 milliseconds NOTE: < 1 second delay on power-up; outputs do not conduct during this time. Adjustments Two push buttons or remote programming of (TEACH) switching threshold response time, OFF-delay, light/dark operate, and display Indicators Four-digit digital display plus LED indicators for active channel, push-button lockout, OFF-delay and light/dark operate selection; two yellow LEDs serve as output indicators and active channel indicator. Construction Black ABS/polycarbonate alloy (UL94 V-0 rated) housing, clear polycarbonate cover. Environmental Rating NEMA 1; IEC IP50 Connections PVC-jacketed 2 m or 9 m 6-wire integral cable or integral 6-pin Pico-style quick-disconnect fitting. QD cables are ordered separately. See page 379. Operating Conditions Temperature: -20° to +55° C Storage Temperature: -20° to +80° C Relative humidity: 90% @ 50° C Number of Devices Stacked Ambient Temperature Rating Load Specification 3 55° C 150 mA 7 50° C 50 mA 10 45° C 50 mA Installation 35 mm DIN rail or included mounting bracket Certifications Hookup Diagrams NPN Models: DC21 (p. 481) PNP Models: DC22 (p. 481) D10 Expert™ with Numeric Display—Analog/Discrete Specifications Required Fiber Optic Cable Banner P-Series plastic fibers (See Plastic Fiber Optic section, page 182) Supply Voltage and Current 4-20 mA Analog Models: 12-24V dc (10% max. ripple) at less than 65 mA exclusive of load 0-10V dc Analog Models: 15-24V dc (10% max. ripple) at less than 70 mA exclusive of load Supply Protection Circuitry Protected against reverse polarity and transient voltage. Output Configuration 2 independently configurable outputs, depending on model: NPN w/analog (4-20 mA or 0-10V) or PNP w/analog (4-20 mA or 0-10V) Output Rating Discrete Output: 150 mA, max. load OFF-state leakage current: < 10 µA at 24V dc ON-state saturation voltage: NPN < 1.5V @ 150 mA PNP < 2.5V @ 150 mA Analog Output: 4-20 mA or 0-10V dc Load: 4-20 mA Models: 100Ω max. impedance 0-10V dc Models: 1 MΩ min. impedance Output Protection Circuitry Protected against false pulse on power-up and continuous short-circuit Output Response Time Discrete Output: Programmable, 50 microseconds, 200 microseconds, 1 millisecond, 2.5 milliseconds Analog Output: 1 millisecond NOTE: < 1 second delay on power-up; outputs do not conduct during this time. Adjustments Push-button or remote programming of (TEACH) switching threshold response time, OFF-delay, light/dark operate, and display Indicators Four-digit digital display plus LED indicators for active channel, push-button lockout, OFF-delay and light/dark operate selection; two yellow output indicators.

170 More information online at bannerengineering.com D10 Series D10 Expert™ with Numeric Display—Analog/Discrete Specifications Construction Black ABS/polycarbonate alloy (UL94 V-0 rated) housing, clear polycarbonate cover. Environmental Rating NEMA 1; IEC IP50 Connections PVC-jacketed 2 m or 9 m 6-wire integral cable or integral 6-pin Pico-style quick-disconnect, QD cables are ordered separately. See page 379. Operating Conditions Temperature: -20° to +55° C Storage Temperature: -20° to +80° C Relative humidity: 90% @ 50° C Number of Devices Stacked Ambient Temperature Rating Load Specification 3 55° C 150 mA 7 50° C 50 mA 10 45° C 50 mA Installation 35 mm DIN rail or included mounting bracket Certifications Hookup Diagrams D10INFP(Q) Current & NPN Models: DC23 (p. 481) D10UNFP(Q) Current & PNP Models: DC25 (p. 482) D10IPFP(Q) Voltage & NPN Models: DC24 (p. 481) D10UPFP(Q) Voltage & PNP Models: DC26 (p. 482) D10 Expert™ with Bargraph Display—Discrete Specifications Required Fiber Optic Cable Banner P-Series plastic fibers (See Plastic Fiber Optic section, page 182) Supply Voltage and Current 10 to 30V dc (10% max. ripple) at less than 45 mA, exclusive of load Supply Protection Circuitry Protected against reverse polarity, over voltage and transient voltage. Delay at Power Up 200 milliseconds max.; outputs do not conduct during this time Output Configuration Bipolar: 1 current sourcing (PNP) and 1 current sinking (NPN) Output Rating 150 mA max. load OFF-state leakage current: less than 5 µA at 30V dc ON-state saturation voltage: NPN less than 200 mV at 10 mA and 1V at 150 mA load PNP less than 1V at 10 mA and 1.5V at 150 mA load Output Protection Circuitry Protected against output short-circuit, continuous overload, transient over-voltages, and false pulse on power-up Output Response Time 500 microseconds (normal mode) or 200 microseconds (high-speed mode) Repeatability 100 microseconds (normal mode) or 66 microseconds (high-speed mode) Adjustments Two push buttons and remote wire  Expert TEACH programming (two-point static, dynamic and single-point static)  Manually Adjust (+/–) sensitivity (from buttons only – not available on remote wire)  LO/DO, OFF Delay, and response speed configurable (from buttons or remote wire)  Push-button lockout (from remote wire only) Factory Default Settings: Light Operate, Normal Speed, No Delay Indicators 8-segment red bargraph: Light-to-dark signal difference relative to taught condition (single-point TEACH ) Sensing contrast (two-point TEACH) Green Status Indicators: LO, DO, High Speed (HS) and OFF Delay Green LED: Power ON Yellow LED: Output conducting Construction Black ABS/polycarbonate alloy (UL94 V-0 rated) housing, clear polycarbonate cover. Environmental Rating NEMA 1; IEC IP50 Connections PVC-jacketed 2 m or 9 m 6-wire integral cable or integral 6-pin Pico-style quick-disconnect. QD cables are ordered separately. See page 379. Operating Conditions Temperature: -10° to +55° C Storage Temperature: -20° to +85° C Relative humidity: 90% @ 50° C Installation 35 mm DIN rail or included mounting bracket Certifications Hookup Diagrams DC11 (p. 478) D10 Expert™ with Numeric Display—Analog/Discrete (cont’d)

171More information online at bannerengineering.com D10 Series D10—Discrete Specifications Required Fiber Optic Cable Banner P-Series plastic fibers (See Plastic Fiber Optic section, page 182) Supply Voltage 10 to 30V dc (10% max. ripple) @ less than 25 mA, exclusive of load Supply Protection Circuitry Protected against reverse polarity and transient voltage Output Configuration Bipolar: 1 current sourcing (PNP) and 1 current sinking (NPN) Output Rating 100 mA per output with short circuit protection OFF-state leakage current: < 10 µA sourcing; 200 µA sinking ON-state saturation voltage: NPN: 1.6V @ 100 mA PNP: 2.0V @ 100 mA Output Protection Circuitry Protected against output short-circuit and false pulse on power up (max. 100 milliseconds delay on power up; outputs do not conduct during this time). Output Response Time Standard models (with cross-talk avoidance circuitry): 500 microseconds High-speed models: 200 microseconds Repeatability Standard models: 95 microseconds High-speed models: 50 microseconds Adjustments 12-turn Sensitivity potentiometer with relative position indicator; LO/DO Selection switch; 0 or 40 milliseconds OFF-delay switch NOTE: Use proper ESD techniques while making adjustments under cover. Indicators Two LEDs: Green and Yellow Green ON steady: Power ON Yellow flashing: Light Sensed Signal strength indicator (Banner’s AID Alignment Indicator Device - the faster the flash, the more light is received). Construction Black ABS/polycarbonate alloy (UL94 V-0 rated) housing, clear polycarbonate cover. Environmental Rating IEC IP50; NEMA 1 Connections PVC-jacketed 2 m or 9 m attached cable or 4-pin Pico-style quick-disconnect fitting. QD cables are ordered separately. See page 378. Operating Conditions Temperature: -10° to +55° C Storage: -20° to +85° C Relative humidity: 90% @ 55° C (non-condensing) Certifications Approvals in process. Hookup Diagrams DC06 (p. 477)

172 More information online at bannerengineering.com D12 Series D12 Sensors D12 Complete Family of Plastic and Glass Fiber Optic Sensors  Features LED bargraph that indicates signal strength, sensing contrast, programming status and diagnostic warnings, when not in high-speed mode  Available in glass and plastic fiber optic models  Includes marginal gain indicator with alarm output  Solves routine applications with economical standard models  Features high-speed sensing response and higher sensing power in some models  Excels in low-contrast applications with ac-coupled models  Features easy push-button TEACH-mode setup on D12E Expert ™ models 7-LED bargraph signal strength indicators Dual-LED multi-function status indicators Sensitivity adjustment 2 m or 9 m attached cable, or Pico-style quick disconnect 35 mm DIN-rail mountable 70.0 mm 30.0 mm 12.0 mm Glass Fiber Models Suffix FV and FVY 30.0 mm 64.0 mm 12.0 mm Plastic Fiber Models Suffix FP and FPY PLASTIC FIBER GLASS FIBER Detailed DimensionsQD CABLES PAGE 378 BRACKETS PAGE 350 4-Pin Pico PLASTIC FIBERS PAGE 182 GLASS FIBERS PAGE 198

173More information online at bannerengineering.com D12 Series D12 Expert™ , 10-30V dc Models Sensing Mode/LED* Maximum Range Switching Threshold Setting Cable** Output Type Data Sheet D12EN6FV GLASS FIBER Range varies by sensing mode and fiber optics used. See data sheet part number 41974 for maximum range specifications. Just above the “dark” condition 2 m NPN 41974 D12EP6FV PNP D12E2N6FV Midway between “dark” and “light” conditions NPN D12E2P6FV PNP D12EN6FP PLASTIC FIBER Just above the “dark” condition NPN D12EP6FP PNP D12E2N6FP Midway between “dark” and “light” conditions NPN D12E2P6FP PNP D12 and D12 High-Speed, 10-30V dc Models Sensing Mode/LED* Range Cable Output Type Output Response Excess Gain Data Sheet D12SN6FV GLASS FIBER Range varies by sensing mode and fiber optics used 2 m NPN 500 µs EGCG-40 & EGCG-41 (p. 446) 32822 D12SN6FVQ 4-Pin Pico Pigtail QD D12SP6FV 2 m PNPD12SP6FVQ 4-Pin Pico Pigtail QD D12SN6FVY GLASS FIBER 2 m NPN Selectable 50 µs or 500 µs* EGCG-42 & EGCG-43 (p. 446) D12SN6FVYQ 4-Pin Pico Pigtail QD D12SN6FVY1 † 2 m D12SN6FVY1Q † 4-Pin Pico Pigtail QD D12SP6FVY 2 m PNP D12SP6FVYQ 4-Pin Pico Pigtail QD D12SP6FVY1 † 2 m D12SP6FVY1Q † 4-Pin Pico Pigtail QD D12SN6FP PLASTIC FIBER Range varies by sensing mode and fiber optics used 2 m NPN 500 µs EGCP- 36 & EGCP-37 (p. 449) D12SN6FPQ 4-Pin Pico Pigtail QD D12SP6FP 2 m PNPD12SP6FPQ 4-Pin Pico Pigtail QD D12SN6FPY PLASTIC FIBER 2 m NPN Selectable 50 µs or 500 µs* EGCP-38 & EGCP-39 (p. 449) D12SN6FPYQ 4-Pin Pico Pigtail QD D12SN6FPY1 † 2 m D12SN6FPY1Q † 4-Pin Pico Pigtail QD D12SP6FPY 2 m PNP D12SP6FPYQ 4-Pin Pico Pigtail QD D12SP6FPY1 † 2 m D12SP6FPY1Q † 4-Pin Pico Pigtail QD HIGH-SPEED HIGH-SPEED † Y1 models have 20 milliseconds output pulse stretcher. Visible Red LED For 9 m cable, add suffix W/30 to the 2 m model number (example, D12EN6FV W/30 ). A model with a QD requires a mating cable (see page 378). *** When 50 microseconds is selected, bargraph is disabled. Download PDF Download PDF 1 ON ALM LO DO 40 ms 0 ms ON c 50S 500S

174 More information online at bannerengineering.com D12 Series D12 High-Power, 10-30V dc Models Sensing Mode/LED* Range Cable** Output Type Output Response Excess Gain Data Sheet D12SN6FPH PLASTIC FIBER Range varies by sensing mode and fiber optics used 2 m NPN 500 µs EGCP- 40 & EGCP-41 (p. 449) 34970 D12SN6FPHQ 4-Pin Pico Pigtail QD D12SP6FPH 2 m PNPD12SP6FPHQ 4-Pin Pico Pigtail QD D12 AC-Coupled, 10-30V dc Models Sensing Mode/LED* Range Cable Output Type Output Response Data Sheet D12DAB6FV GLASS FIBER Range varies by Power Level/Speed Selection used and with fiber optics used. See data sheet part number 38384 for range information. 2 m Bipolar NPN/PNP 50 µs 38384 D12DAB6FVQ 4-Pin Pico Pigtail QD D12DAB6FP PLASTIC FIBER 2 m 50 µs D12DAB6FPQ 4-Pin Pico Pigtail QD Visible Red LED For 9 m cable, add suffix W/30 to the 2 m model number (example, D12SN6FPH W/30 ). A model with a QD requires a mating cable (see page 378). D12 Expert™ Specifications Supply Voltage and Current 10 to 30V dc at 45 mA max. (exclusive of load); 10% max. ripple Supply Protection Circuitry Protected against reverse polarity and transient voltages Output Configuration NPN open collector (both outputs) or PNP open collector (both outputs), depending on model Load output: NO and programmable Light or Dark-Operate; Alarm output: NO Output Rating 150 mA max. each output Off-state leakage current: less than 10 µA at 30V dc On-state saturation voltage: less than 1 volt at 10 mA dc and less than 1.5 volts at 150 mA dc. The total load may not exceed 150 mA Output Protection Circuitry Protected against false pulse on power-up and short circuit of outputs (trips at 175 mA) Output Response Time 200 microseconds ON/OFF (40 milliseconds OFF when OFF-delay selected) (NOTE: False pulse protection circuit causes a 0.1 second delay on power-up) Output Operation Mode Light operate or dark operate: selected by push button Output Timing Functions ON/OFF (no delay) or fixed 40 millisecond OFF-delay; selected by push button Repeatability 66 microseconds Adjustments Push-button teach mode sensitivity setting; Remote teaching input is provided Indicators Green LED lights for DC power ON and flashes when ready for teach mode; 1 Hz when ready to learn first condition; 2 Hz for second condition Yellow LED lights for load output ON (conducting) 7-segment moving dot red LED display indicates relative received light signal strength, output program settings, relative contrast level and alarm Mounting Bracket D12 Sensors mount directly to a standard DIN rail, or may be through-hole mounted using the supplied mounting bracket and M3 x 0.5 hardware Download PDF ON c LOCK GAIN LO DO Download PDF ON c

175More information online at bannerengineering.com D12 Series D12 Expert™ Specifications Construction Black ABS housing with acrylic cover, stainless steel M3 x 0.5 hardware for use with thermoplastic polyester mounting bracket (supplied); the plastic fiber clamping element is Acetal Environmental Rating Rated NEMA 4; IEC IP66 Connections PVC-jacketed 2 m or 9 m cables or 150 mm pigtail with 4-pin Pico-style quick-disconnect (QD) are available. QD cables are ordered separately. See page 378. Operating Conditions Temperature: -20° to +70° C Relative humidity: 90% at 50° C (non-condensing) Certifications (except D10E2) Hookup Diagrams NPN Models: DC27 (p. 482) PNP Models: DC28 (p. 482) D12 Standard, High-Speed and High-Power Specifications Supply Voltage and Current 10 to 30V dc at 45 mA max. (exclusive of load) Supply Protection Circuitry Protected against reverse polarity and transient voltages Output Configuration Outputs are NPN (sinking) or PNP (sourcing), depending on model Complementary: one normally open (NO) and the other normally closed (NC); NC output may be wired as diagnostic alarm output by reversing power supply connections except high speed “Y” and “Y1” suffix models (see hookups) Output Rating 150 mA max. each output Off-state leakage current: less than 10 mA at 30V dc On-state saturation voltage: less than 1 volt at 10 mA dc and less than 1.5 volts at 150 mA dc The total load may not exceed 150 mA Output Protection Circuitry Protected against false pulse on power-up and short circuit of outputs Output Response Time Standard and High-Power Models: 500 microseconds on/off; High-Speed Models: selectable 50 or 500 microseconds on/off (NOTE: False pulse protection circuit causes a 0.1 second delay on power-up) Output Timing Functions “Y1” models have fixed 20 milliseconds pulse stretcher (off-delay) when 50 microseconds mode is used Repeatability 130 microseconds; “Y” and “Y1” models have selectable 50 microseconds/500 microseconds response; repeatability in 50 microseconds mode is 15 microseconds Adjustments All models have a SENSITIVITY control on top of sensor (15-turn slotted brass screw, clutched at both ends of adjustment); “Y” and “Y1” (high speed models) also have a top-mounted response mode selector switch Indicators Two top-mounted LED indicators, one yellow and one green, and one 7-segment red LED moving dot bargraph; Note that the 7-segment bargraph and marginal excess gain indication (bargraph segment #7) are inoperative in the 50 µs response mode of “Y” and “Y1” models Green LED lights for DC Power On Yellow LED lights for NORMALLY OPEN OUTPUT CONDUCTING On all models in 500 microseconds response mode, the 7-segment moving dot red LED bargraph lights to indicate relative received light signal strength; On all models in 50 and 500 microseconds response mode, segment #1 flashes to indicate OUTPUT OVERLOAD; On all models in the 500 microseconds response mode, segment #7 flashes to indicate MARGINAL EXCESS GAIN; On standard and high power models, a flashing LED corresponds to the “on” state of the alarm output; (Alarm output not available on Y & Y1 models) Mounting Bracket D12 Sensors mount directly to a standard DIN rail, or may be through-hole mounted using the supplied mounting bracket and M3 x 0.5 hardware Construction Black ABS housing with acrylic cover, stainless steel M3 x 0.5 hardware for use with thermoplastic polyester mounting bracket (supplied); the plastic fiber clamping element is Acetal Environmental Rating Rated NEMA 4; IEC IP66 Connections PVC-jacketed 2 m or 9 m cables, or 150 mm pigtail with 4-pin Pico-style quick-disconnect (QD) are available. QD cables are ordered separately. See page 378. Operating Conditions Temperature: -20° to +70° C Relative humidity: 90% at 50° C (non-condensing) Certifications Hookup Diagrams NPN Models: DC07 (p. 477) PNP Models: DC08 (p. 477) D12 Expert™ Specifications (cont’d)

176 More information online at bannerengineering.com D12 Series D12 AC-Coupled Specifications Supply Voltage and Current 10 to 30V dc at 60 mA max. (exclusive of load) Supply Protection Circuitry Protected against reverse polarity and transient voltages Output Configuration Bipolar: one NPN (current sinking) and one PNP (current sourcing) open-collector transistor Output Rating 150 mA max. each output Off-state leakage current: less than 10 mA at 30V dc On-state saturation voltage: less than 1 volt at 10 mA dc and less than 1.5 volts at 150 mA dc The total load may not exceed 150 mA Output Protection Circuitry Protected against false pulse on power-up and short circuit of outputs Output Response Time 50 microseconds ON/OFF (NOTE: False pulse protection circuit causes a 0.1 second delay on power-up) Output Operation Mode Light operate or dark operate: selected by switch Output Timing Functions Pulse output; adjustable from 1 to 70 milliseconds Repeatability 15 microseconds ON Adjustments Three top-panel controls: SENSITIVITY control (15-turn slotted brass screw, clutched at both ends of adjustment), a light- or dark-operate select switch, and an OUTPUT PULSE adjustment (3/4-turn potentiometer) Indicators Three top-mounted LED indicators: Green LED lights to indicate dc Power ON Yellow LED lights for Output Conducting Red LED lights whenever AGC system is locked onto the signal Mounting Bracket D12 Sensors mount directly to a standard DIN rail, or may be through-hole mounted using the supplied mounting bracket and M3 x 0.5 hardware Construction Black ABS housing with acrylic cover, stainless steel M3 x 0.5 hardware for use with thermoplastic polyester mounting bracket (supplied); the plastic fiber clamping element is Acetal Environmental Rating Rated NEMA 4; IEC IP66 Connections PVC-jacketed 2 m or 9 m cables, or 150 mm pigtail with 4-pin Pico-style quick-disconnect (QD) are available. QD cables are ordered separately. See page 378. Operating Conditions Temperature: -40° to +70° C Relative humidity: 90% at 50° C (non-condensing) Application Note D12 AC-coupled sensors should not be used in areas of known electrical “noise” or RF fields. Hookup Diagrams DC06 (p. 477)

177More information online at bannerengineering.com 10-element signal strength indicator bargraph 2 m or 9 m attached cable, or Euro-style quick disconnect Simple push-button programming and status indicators Models for use with glass or plastic fiber optics - Glass fiber models function well in harsh environments typically associated with printing processes. - Plastic fiber models function well in applications that require repeated flexing of the fibers. Quick fiber installation without tools R55 Fiber Optic Sensors 25.0 mm 85.4 mm Detailed Dimensions GLASS FIBER PLASTIC FIBER QD CABLES PAGE 382 BRACKETS PAGE 350 5-Pin Euro 30.0 mm Glass or Plastic Fiber Optic Sensors  Delivers outstanding color contrast sensitivity  Features innovative TEACH function for two options for setting the sensing threshold  Reliably detects 16 levels of grayscale at up to 10,000 actuations per second  Available in two fiber types: economical plastic for repeated flexing and glass for harsh conditions  Easily mounts in confined areas, either flat or to 35 mm DIN rail  Provides bipolar (NPN/PNP) outputs with delay settings of 0, 20 and 40 milliseconds. Fiber Systems R55F Series R55F PLASTIC FIBERS PAGE 182 GLASS FIBERS PAGE 198

178 More information online at bannerengineering.com R55F Series R55 Fiber Optic, 10-30V dc Models Sensing Mode/LED* Range Cable Output Type Data Sheet R55F GLASS FIBER Range varies by sensing mode and fiber optics used. 2 m Bipolar NPN/PNP 57945 R55FQ 5-pin Euro QD R55FV GLASS FIBER 2 m R55FVQ 5-pin Euro QD R55FVG GLASS FIBER 2 m R55FVGQ 5-pin Euro QD R55FVB PLASTIC FIBER 2 m R55FVBQ 5-pin Euro QD R55FVW GLASS FIBER 2 m R55FVWQ 5-pin Euro QD R55FP PLASTIC FIBER 2 m R55FPQ 5-pin Euro QD R55FPG PLASTIC FIBER 2 m R55FPGQ 5-pin Euro QD R55FPB PLASTIC FIBER 2 m R55FPBQ 5-pin Euro QD R55FPW PLASTIC FIBER 2 m R55FPWQ 5-pin Euro QD Infrared LED Visible Red LED Visible Green LED Visible Blue LED Visible White LED For 9 m cable, add suffix W/30 to the 2 m model number (example, R55F W/30 ). A model with a QD requires a mating cable (see page 382). Download PDF SETUP

179More information online at bannerengineering.com R55F Series R55 Fiber Optic Specifications Supply Voltage and Current 10 to 30V dc (10% max. ripple) at less than 70 mA, exclusive of load Supply Protection Circuitry Protected against reverse polarity and transient voltages Output Configuration Bipolar: One current sourcing (PNP) and one current sinking (NPN) open-collector transistor Output Rating 150 mA max each output @ 25° C (derate ≈ 1 mA per ° C increase) OFF-state leakage current: less than 5 µA @ 30V dc ON-state saturation voltage: PNP Output less than 1V @ 10 mA and 1.5V @ 150 mA NPN Output less than 200 mV @ 10 mA and 1V @ 150 mA Output Protection Circuitry Protected against false pulse on power-up and continuous overload or short-circuit of outputs Output Response Time 50 microseconds NOTE: 100 millisecond delay on power-up; outputs do not conduct during this time. Adjustments Using push buttons (“+” Dynamic and “-” Static): Manually adjust Switch Point using “+” or “-” buttons Dynamic TEACH (teach on-the-fly) sensitivity adjustment Static TEACH sensitivity adjustment Static Single-Point TEACH Light operate/Dark operate OFF Delay select: 0 milliseconds, 20 milliseconds or 40 milliseconds Using Remote TEACH input (gray wire): Dynamic TEACH (teach on-the-fly) sensitivity adjustment Static TEACH sensitivity adjustment Static Single-Point TEACH Light operate/Dark operate OFF Delay select: 0 milliseconds, 20 milliseconds or 40 milliseconds Push button lockout for security Indicators 10-segment (green) light bar indicates signal strength Light Operate (green) Dark Operate (green) Outputs Conducting (yellow) OFF Delay (green): SETUP Mode: OFF — no delay RUN Mode: OFF — no delay Flashing — 20 milliseconds delay ON — 20 or 40 milliseconds Delay ON — 40 milliseconds delay Construction Black ABS/polycarbonate blend; nylon fiber clip mounts to standard 35 mm DIN rail 1 stainless steel right angle bracket and 1 PBT polyester bracket for mounting to flat surfaces also included with sensor Environmental Rating IEC IP67; NEMA 6 Connections 2 m or 9 m PVC-jacketed 5-conductor cable or 5-pin Euro-style quick-disconnect (QD) fitting. QD cables are ordered separately. See page 382. Fibers: Fiber clip (no tool required) Operating Conditions Temperature: -10° to +55° C Relative humidity: 90% at 50° C (non-condensing) Application Notes  Do not mount the fiber tip directly perpendicular to shiny surfaces; position it at approximately a 15° angle in relation to the sensing target.  Minimize web or product “flutter” whenever possible to maximize sensing reliability. Certifications Hookup Diagrams DC11 (p. 478)

180 More information online at bannerengineering.com FI22 Expert ™ Series Push-button TEACH-mode programming 2 m or 9 m integral cable, or 6-pin Pico-style quick disconnect Easy-to-read 8-segment bargraph status indicator Custom bracket for quick snap-in mounting Low-Profile Inline Fiber Optic Sensors  Features a low profile for inconspicuous surface mounting  Includes 8-segment LED light bar that indicates relative received signal strength, sensing contrast, programming status and diagnostic warnings  Offers TEACH-mode programming for static, dynamic and single-point configuration, and manual adjustment for fine tuning  Features easy-to-read TEACH and signal strength readout, as well as a continuous readout of operating status  Can be programmed for either light- or dark-operate output FI22 Expert ™ FI22 Expert™ Sensors 14.5 mm 50.0 mm 23.0 mm PLASTIC FIBER Plastic Fiber Models Suffix FP Detailed Dimensions QD CABLES PAGE 379 6-Pin Pico PLASTIC FIBERS PAGE 182

181More information online at bannerengineering.com FI22 Expert ™ Series FI22 Expert™ , 10-30V dc Models Sensing Mode/LED* Range Cable Output Type Excess Gain Beam Pattern Data Sheet FI22FP PLASTIC FIBER Range varies by sensing mode and fiber optics used. See data sheet part number 108899 for maximum range specifications. 2 m Bipolar NPN/PNP Opposed mode: EGCP-42, EGCP-43 & EGCP-44 (p. 449) Diffuse mode: EGCP-45, EGCP-46 & EGCP-47 (p. 449) Opposed mode: BPP-36, BPP-37 & BPP-38 (p. 467) Diffuse mode: BPP-39, BPP-40 & BPP-41 (p. 467) 108899 FI22FPQ 6-pin Pico QD Visible Red LED For 9 m cable, add suffix W/30 to the 2 m model number (example, FI22FP W/30 ). A model with a QD requires a mating cable (see page 379). FI22 Expert™ Specifications Supply Voltage 10 to 30V dc (10% max. ripple) @ less than 32 mA exclusive of load Supply Protection Circuitry Protected against reverse polarity, over voltage, and transient voltages Delay at Power Up 250 milliseconds max.; outputs do not conduct during this time Output Configuration Bipolar: 1 current sourcing (PNP) and 1 current sinking (NPN) Output Rating 100 mA max. load @25° C (derate 1 mA per ° C increase) OFF-state leakage current: less than 50 µA at 30V dc ON-state saturation voltage: NPN: less than 200 mV @ 10 mA and 1V @ 100 mA load PNP: less than 1.5V @ 10 mA and 2.0V @ 100 mA load Output Protection Protected against output short-circuit, continuous overload, transient over-voltages, and false pulse on power up Output Response Time 500 microseconds Repeatability 100 microseconds Adjustments 2 push buttons and remote wire  Expert TEACH programming (two-point static, dynamic and single-point static)  Manually adjust (+/–) thresholds (from buttons only – not available from remote wire)  LO/DO and OFF Delay configurable (from buttons or remote wire)  Push-button lockout (from remote wire only) Indicators 8-segment red bargraph: Light-to-dark signal difference relative to taught condition (single-point TEACH) Sensing contrast (two-point TEACH) Green LED: Power ON Yellow LED: Output conducting Construction PC/ABS blend plastic housing; polycarbonate cover Environmental Rating IP67; NEMA 6 Connections 5-conductor 2 m PVC cable, 9 m PVC cable, or 6-pin integral Pico-style quick-disconnect fitting. QD cables are ordered separately. See page 379. Operating Conditions Temperature: -10° to +55° C Relative humidity: 90% @ 50° C (non-condensing) Certifications Hookup Diagrams DC11 (p. 478) Download PDF

182 More information online at bannerengineering.com Plastic Fiber Optics Plastic Fiber Optics  Provide an economical alternative to glass fiber optics for piping photoelectric sensing light to and from confined areas with suitable environments  Ideal for detecting small objects  Withstand repeated flexing and bending  Available in individual or bifurcated styles*  Available with optional DURA-BEND ™ fibers for improved flexibility for difficult-to-access locations, without the decreased performance to which excessively bent standard plastic fibers optics are prone  Available with core diameters of 0.25, 0.50, 0.75, 1.0 and 1.5 mm * All individual plastic fiber optics are sold and used in pairs. Bifurcated fibers are two-way fibers with a single sensing end that both emits and receives light and with dual- control sensor ends that attach separately to the sensor’s LED and photodetector. Plastic fibers with “U” in the suffix of the model numbers have unterminated control ends; cut them to the required length. Use supplied cutter. FIBER CORE DIAMETER designator 1 = 0.25 mm 2 = 0.50 mm 3 = 0.75 mm 4 = 1.00 mm 6 = 1.50 mm 1X4 = 4 x 0.25 mm 1X16 = 16 x 0.265 mm 1X32 = 32 x 0.265 mm CONTROL END designator T5 = Terminated TMB5 = STEELSKIN ™ braiding over monocoil reinforcement U = Unterminated straight cable UC = Unterminated Coiled cable UHF = Unterminated DURA-BEND™ multi-core cable ASSEMBLY STYLE designator B = Bifurcated fiber I = Individual fiber* DI = Dual Individual fiber* FIBER LENGTH designator 3 = 1 m (1000 mm) 6 = 2 m (2000 mm) 100 = 30 m (30480 mm) MODIFICATIONS designator “MXX” = Sensing end tip modification SENSING END designator A = 90° Angle AT = 90° Angle/Thread CF = Coaxial Ferrule CT = Coaxial Thread E = Encapsulated EFP = Extended Ferrule Probe F = Ferrule FM = Ferrule Miniature FMP = Ferrule Miniature Probe L = Lensed P = Probe PF = Probe Ferrule PMSB = Probe Miniature Side-view Bendable PS = Probe Side-view PSB = Probe Side-view Bendable PSM = Probe Side-view Miniature R = Rectangular RS = Rectangular Side-view T = Thread TA = Thread/90° Angle TP = Thread/Probe PLASTIC FIBER FAMILY designator Same for all plastic fibers P B P 4 6 U C X Plastic Fiber Optic Model Key

183More information online at bannerengineering.com Plastic Fiber Optics Plastic Fiber Optics Specifications Construction Optical Fiber: acrylic (PMMA) monofilament, except as noted. Protective Jacket: black polyethylene, except as noted Threaded End Tips and Hardware: nickel-plated brass, except as noted. Probe End Tips: annealed (bendable) 304 stainless steel Angled End tips: hardened 304 stainless steel Ferrule End Tips: 303 stainless steel Sensing Range Refer to the specific fiber optic/sensor combination Implied Dimensional Tolerance “L” = ±40 mm per meter Minimum Bend Radius 8 mm for 0.25 mm diameter fibers 12 mm for 0.5 mm diameter fibers (except DURA-BEND ™ ) 25 mm for 1.0 mm diameter fibers (except DURA-BEND™ ) 38 mm for 1.5 mm diameter fibers Repeat Bending/Flexing Life expectancy of plastic fiber optic cable is in excess of one million cycles at bend radii of no less than the minimum and a bend of 90° or less. Avoid stress at the point where the cable enters the sensor (“control end”) and at the sensing end tip. Coiled plastic fiber optic assemblies are recommended for any application requiring reciprocating fiber motion. Chemical Resistance The acrylic core of the monofilament optical fiber will be damaged by contact with acids, strong bases (alkalis) and solvents. The polyethylene jacket will protect the fiber from most chemical environments. However, materials may migrate through the jacket with long term exposure. Samples of fiber optic material are available from Banner for testing and evaluation. Temperature Extremes Temperatures below -30° C will cause embrittlement of the plastic materials but will not cause transmission loss. Temperatures above +70° C will cause both transmission loss and fiber shrinkage. Operating Temperature -30° to +70° C, unless otherwise specified ! APPLICATION NOTES AND WARNINGS ! Plastic fiber assemblies with “U” in the suffix of the model numbers have unterminated control ends (the end that is coupled to the photoelectric sensor). The customer can cut these fiber optic assemblies to the required length using the supplied cutter. Use only the supplied cutter to ensure optimal light coupling efficiency. Terminated plastic fiber assemblies are optically ground and polished and cannot be shortened, spliced or otherwise modified. Do not subject the plastic fibers to sharp bends, pinching, high tensile loads or high levels of radiation. When ordering fiber lengths in excess of 2 m, take into account light signal attenuation due to the additional length. Due to their light transmission properties, plastic fiber optics are recommended for use only with visible light fiber optic sensors. Use caution when applying fiber optics in hazardous locations. Although fiber optic assemblies are, by themselves, intrinsically safe, the sensor and associated electronics must be LOCATED IN A SAFE ENVIRONMENT. Alternatively, fiber optics may be used with NAMUR sensor model Q45AD9FP (page 152). Fiber optics do not necessarily provide a hermetic seal between a hazardous environment and the safe environment.

184 More information online at bannerengineering.com Plastic Fiber Optics Indicates fiber can be Free Cut using Fiber Cutter. See page 197. NA: WORLD-BEAM QS18 not recommended. WORLD-BEAM® QS18 MINI-BEAM® Expert™ Discrete Bargraph Super High Speed High Speed High Power Super High Power D10 SERIES FI22 DIFFUSE STANDARD 0.25 8PBF16U Detailed Dimensions Online 2X ø 1.0 polyethylene 16.02000 ø 3.0 stainless steel 52 5 10 15 20 30  Smooth ferrule 0.5 12PBF26U Detailed Dimensions Online 2X ø 1.0 polyethylene 16.02000 ø 4.1 stainless steel 20 140 40 60 80 100 120 160  Smooth ferrule 1.0 25PBF46U Detailed Dimensions Online 2X ø 2.2 polyethylene stainless steel 17.02000 ø 5.1 50 250 100 150 200 300  Smooth ferrule 1.0 25PBF46UM3MJ1.3 Detailed Dimensions Online 2X ø 1.3 polyethylene stainless steel 17.02000 ø 3.0 50 250 100 150 200 300  Smooth ferrule; thin jacket (ø 1.3) 1.5 38PBF66U Detailed Dimensions Online 2X ø 2.2 polyethylene stainless steel 17.02000 ø 5.1 100 400 200 300 500  Smooth ferrule; long range0.25 8PBFM16U Detailed Dimensions Online 2X ø 1.0 polyethylene 15.0 15.02000 M3 x 0.5 stainless steel ø 0.5 stainless steel (non-bendable) ferrule 52 5 10 15 20 30  Non-bendable miniature tip1.0 25PBFM46U Detailed Dimensions Online 2X ø 2.2 polyethylene stainless steel 14.0 17.02000 ø 5.1 ø 3.05 50 250 100 150 200 300  Smooth ferrule 0.25 8PBT16U Detailed Dimensions Online 2X ø 1.0 polyethylene 11.02000 M3 x 0.5 stainless steel 52 5 10 15 20 30  Thread 0.5 12PBT26U Detailed Dimensions Online 2X ø 1.0 polyethylene 11.02000 M3 x 0.5 nickel plated brass 20 140 40 60 80 100 120 160  Thread 1.0 25PBT46U Detailed Dimensions Online ø 4.0 2X ø 2.2 polyethylene 14.0 3.02000 M6 x 0.75 nickel plated brass 50 250 100 150 200 300  Thread 1.5 38PBT66U Detailed Dimensions Online ø 4.0 2X ø 2.2 polyethylene 14.0 3.02000 M6 x 0.75 nickel plated brass 100 400 200 300 500  Thread; long range CORE DIA. MIN. BEND MODEL NUMBER DRAWING & DIMENSIONS (mm ) RADIUS (mm) FEATURES TYPICAL RANGE (mm)

185More information online at bannerengineering.com Plastic Fiber Optics WORLD-BEAM® QS18 MINI-BEAM® Expert™ Discrete Bargraph Super High Speed High Speed High Power Super High Power D10 SERIES FI22 DIFFUSE SIDE-VIEW PROBE 0.5 12PBEFP26U Detailed Dimensions Online 20.0 2.0 2X ø 1.0 polyethylene stainless steel 15.02000 ø 1.65 ø 4.0 ø 1.27 20 140 40 60 80 100 120 160  Smooth ferrule; non-bendable tip 0.25 8PBFMP16UMP .2 Detailed Dimensions Online 5.0 ø 3.0 ø 0.82 2X ø 1.0 polyethylene stainless steel 15.02000 52 5 10 15 20 30  Smooth ferrule; non-bendable tip0.25 8PBP16U Detailed Dimensions Online 2X ø 1.0 polyethylene 11.0 5.0 bendable area 10.0 632000 M3 x 0.5 nickel plated brass ø 0.81 annealed stainless steel (bendable) probe 52 5 10 15 20 30  Thread; bendable tip 0.5 12PBP26U Detailed Dimensions Online 2X ø 1.0 polyethylene 11.0 892000 M3 x 0.5 nickel plated brass ø 1.47 annealed stainless steel (bendable) probe 20 140 40 60 80 100 120 160  Thread; bendable tip 1.0 25PBP46U Detailed Dimensions Online 2X ø 2.2 polyethylene 17.0 89.02000 M6 x 0.75 nickel plated brass ø 3.0 annealed stainless steel (bendable) probe 50 250 100 150 200 300  Thread; bendable tip 0.5 12PBPF26U Detailed Dimensions Online 2X ø 1.0 polyethylene 15.02000 M4 x 0.7 stainless steel ø 1.27 5.0 2.0bendable area 10.0 ø 1.65 annealed stainless steel (bendable) probe 20 140 40 60 80 100 120 160  Thread; bendable tip 0.5 12PBPF26UMB Detailed Dimensions Online aluminum ø 1.27 2000 10.0 3.0 15.0 65 2X ø 1.0 polyethylene 2.0 ø 1.65 annealed stainless steel (bendable) probe2X ø 3.4 2X ø 0.5 20 140 40 60 80 100 120 160  Flat mounting block; bendable tip0.75 20PBPMSB36U Detailed Dimensions Online 2X ø 2.2 polyethylene stainless steel 15.02000 5.0 bendable area 10.0 2.30 2.50 ø 2.1 ø 4.8 annealed stainless steel (bendable) probe 10 70 20 30 40 50 60 80  Smooth ferrule; bendable tip0.5 12PBPS26U Detailed Dimensions Online 2X ø 1.0 polyethylene 2000 stainless steel 14.0 2.5 3.0 ø 1.47 ø 3.2 10 40 20 30 50  Smooth ferrule; non-bendable tip1.0 25PBPS46U Detailed Dimensions Online 2X ø 2.2 polyethylene stainless steel 14.02000 3.0 3.2 ø 3.0 ø 5.1 stainless steel (non-bendable) probe 20 140 40 60 80 100 120 160  Smooth ferrule; non-bendable tip1.0 25PBPS46UMT Detailed Dimensions Online 3.0 3.2 ø 3.0 stainless steel (non-bendable) probe 2X ø 2.2 polyethylene 14.02000 M6 x 0.75 nickel plated brass 51 20 140 40 60 80 100 120 160  Thread; non-bendable tip1.5 38PBPS66U Detailed Dimensions Online 2X ø 2.2 polyethylene stainless steel 14.02000 2.5 3.0 ø 3.8ø 5.1 stainless steel (non-bendable) probe 50 350 100 150 200 250 300 400  Smooth ferrule; non-bendable tip CORE DIA. MIN. BEND MODEL NUMBER DRAWING & DIMENSIONS (mm) RADIUS (mm) FEATU RES TYPICAL RANGE (mm) Indicates fiber can be Free Cut using Fiber Cutter. See page 197. NA: WORLD-BEAM QS18 not recommended.

186 More information online at bannerengineering.com Plastic Fiber Optics WORLD-BEAM® QS18 MINI-BEAM® Expert™ Discrete Bargraph Super High Speed High Speed High Power Super High Power D10 SERIES FI22 Indicates lens available for model. See page 189 for details. Indicates fiber can be Free Cut using Fiber Cutter. See page 197. CORE DIA. MIN. BEND MODEL NUMBER DRAWING & DIMENSIONS (mm ) RADIUS (mm) FEATURES TYPICAL RANGE (mm) DIFFUSE HIGH-FLEX COAXIAL 0.5 4X 0.25 12PBCF21X46U Detailed Dimensions Online 15.0 ø 3.0 ø 2.0 2X ø 1.0 polyethylene stainless steel 15.02000 20 100 40 60 80 120  Miniature probe tip 1.0 16X 0.265 25PBCF46U Detailed Dimensions Online ø 5.12X ø 2.2 polyethylene 17.02000 stainless steel 50 100 150 200 250 300 350  Smooth ferrule 0.5 4X 0.25 12PBCT21X46U Detailed Dimensions Online 2X ø 1.0 polyethylene 12.02000 M3 x 0.5 stainless steel 20 100 40 60 80 120  Miniature thread 0.5 9X 0.25 12PBCT26U Detailed Dimensions Online 2X ø 1.25 polyethylene 18.02000 M4 x 0.7 stainless steel 4020 160 14060 10080 120 180  Thread 0.5 9X 0.25 12PBCT26UM3 Detailed Dimensions Online 2X ø 1.25 polyethylene 13.05.02000 M3 x 0.5 stainless steel ø 3.0 4020 160 14060 10080 120 180  Miniature thread 0.5 9X 0.25 12PBCT26UM4M2.5 Detailed Dimensions Online 2X ø 1.25 polyethylene 11.0 3.02000 M4 x 0.7 stainless steel M2.5 x 0.045 4020 160 14060 10080 120 180  Thread 1.0 16X 0.265 25PBCT46U Detailed Dimensions Online ø 4.02X ø 2.2 polyethylene 14.0 3.02000 M6 x 0.75 nickel plated brass 50 100 150 200 250 300 350  Thread 4X 0.25 8PBFM1X43T5 Detailed Dimensions Online polyethylene stainless steel ø 1.0 15.024.5 152 1000 ø 1.88 PVC with monocoil 30.0 15.5 ø 4.6ø 2.2 10 40 20 30 50  Best for repetitive flexing (1,000s of cycles)1.0 25PBP46UC Detailed Dimensions Online 2X ø 2.2 polyethylene 2000 fully extended200 ø 23 280 17.0 89.0 M6 x 0.75 nickel plated brass ø 3.0 annealed ss (bendable) probe 20 100 40 60 80 120  For applications involving reciprocating motion1.0 25PBT46UC Detailed Dimensions Online 2X ø 2.2 polyethylene 2000 fully extended200 ø 23 280 17.0 M6 x 0.75 nickel plated brass ø 4.0 3.0 20 100 40 60 80 120  For applications involving reciprocating motion0.5 9X 0.25 12PLI-A10 Detailed Dimensions Online 2X ø 1.25 polyethylene 32.22000 anodized aluminum knurled locking ferrule ø 3.0 smooth ferrule stainless M6 x 0.75 anodized aluminum  Anodized AL tip; ø 0.5 - 3.2 mm beam spot  Glass lens CONVERGENT BEAM SPOT NA: WORLD-BEAM QS18 not recommended. NA: MINI-BEAM Expert™ not recommended.

187More information online at bannerengineering.com Plastic Fiber Optics CORE DIA. MIN. BEND MODEL NUMBER DRAWING & DIMENSIONS (mm) RADIUS (mm) FEATU RES TYPICAL RANGE (mm) DIFFUSE AREA SENSING (ARRAY ) DURA-BEND 1.0 1PBF46UHF Detailed Dimensions Online 2X ø 2.2 polyethylene stainless steel 17.02000 ø 5.1 50 200 100 150 250  Smooth ferrule 1.0 1PBFM46UHF Detailed Dimensions Online 2X ø 2.2 polyethylene stainless steel 14.0 17.02000 ø 5.1 ø 3.05 50 200 100 150 250  Smooth ferrule 1.0 1PBP46UHF Detailed Dimensions Online 2X ø 2.2 polyethylene 17.0 89.02000 M6 x 0.75 nickel plated brass ø 3.0 annealed stainless steel (bendable) probe 50 200 100 150 250  Thread; bendable tip 1.0 1PBPS46UHF Detailed Dimensions Online 2X ø 2.2 polyethylene stainless steel 14.02000 3.0 3.2 ø 3.0ø 5.1 stainless steel (non-bendable) probe 20 80 40 60 100  Smooth ferrule; non-bendable tip 0.5 1PBT26UHF Detailed Dimensions Online 2X ø 1.0 polyethylene 11.02000 M3 x 0.5 nickel plated brass 10 50 20 30 40 60  Thread 1.0 1PBT46UHF Detailed Dimensions Online ø 4.0 2X ø 2.2 polyethylene 14.0 3.02000 M6 x 0.75 nickel plated brass 50 200 100 150 250  Thread 32X 0.265 25PBR1X326U Detailed Dimensions Online 2X ø 2.2polyethylene aluminum 2000 20.0 10.85 5.020.0 13.0 32X ø 0.265 3X M3 x 0.5 15.0 50 250 100 150 200 300  Rectangular tip 32X 0.265 25PBRS1X326U Detailed Dimensions Online aluminum 2X ø 2.22000 polyethylene 20.0 5.020.0 3X M3 x 0.5 13.0 15.0 10.85 32X ø 0.265 50 250 100 150 200 300  Rectangular tip; side sensing 0.5 12P22-C1 Detailed Dimensions Online 2X ø 1.0polyethylene 19.0 14.2 8.4 2000 3 0.50 2X ø 3.4 ø 6 countersink 5.0 plastic  Straight exit with lenses; 3 mm range; DURA-BEND fiber 0.5 12P12-C1 Detailed Dimensions Online  Side exit with lenses; 3 mm range; DURA-BEND fiber 1.0 12P32-C2 Detailed Dimensions Online 2X ø 1.0polyethylene plastic 10.0 6.0 15.0 3.0 2000 19.0 14.0 2X ø 3.1 ø 6 countersink 1.5 deep Receiver Emitter  Flat mount; 2 mm range; DURA-BEND fiber MECHANICAL CONVERGENT WORLD-BEAM® QS18 MINI-BEAM® Expert™ Discrete Bargraph Super High Speed High Speed High Power Super High Power D10 SERIES FI22 Indicates fiber can be Free Cut using Fiber Cutter. See page 197. NA: WORLD-BEAM QS18 not recommended.

188 More information online at bannerengineering.com Plastic Fiber Optics WORLD-BEAM® QS18 MINI-BEAM® Expert™ Discrete Bargraph Super High Speed High Speed High Power Super High Power D10 SERIES FI22 CORE DIA. MIN. BEND MODEL NUMBER DRAWING & DIMENSIONS (mm ) RADIUS (mm) FEATURES TYPICAL RANGE (mm) DIFFUSE HIGH TEMP 1.0 12PBAT43TMB5 Detailed Dimensions Online 16.5 ø 3.0 14.0 25.4 R 12.7 14.0 3.0 M6 x 0.75 stainless steel ø 4.0191 1000 ø3.6 Stainless Braid Over Monocoil ø2.9 Stainless Braid Over Monocoil30.0 15.5 ø 5.1 stainless steel ø 4.6ø 2.2 Shrink Junction 50 200 100 150 250  90° Angle/Thread 0.5 9X 0.25 12PBCT23TMB5 Detailed Dimensions Online Shrink Junction 191 1000 ø3.6 Stainless Braid Over Monocoil ø2.9 Stainless Braid Over Monocoil30.0 15.5 13.2 18.4 M3 x 0.5 stainless steel ø 4.4 ø 4.6ø 2.2 4020 160 14060 10080 120 180  Miniature thread 0.5 9X 0.25 12PBCT23TMB5M4 Detailed Dimensions Online Shrink Junction 191 1000 ø3.6 Stainless Braid Over Monocoil ø2.9 Stainless Braid Over Monocoil30.0 15.5 18.2 24.0 M4 x 0.7 stainless steel ø 4.4ø 4.6ø 2.2 4020 160 14060 10080 120 180  Thread 1.0 12PBF43TMB5 Detailed Dimensions Online Shrink Junction 191 1000 ø3.6 Stainless Braid Over Monocoil 30.0 15.5 ø 4.6ø 2.2 17.0 ø 5.1stainless steel ø2.9 Stainless Braid Over Monocoil 50 200 100 150 250  Smooth ferrule 1.0 12PBPS43TMB5 Detailed Dimensions Online Shrink Junction 191 ø3.6 Stainless Braid Over Monocoil ø2.9 Stainless Braid Over Monocoil30.0 15.5 ø 4.6ø 2.2 1000 14.0 51 stainless steel (non-bendable) probe ø 5.1 ø 3.0stainless steel 20 80 40 60 100  Smooth ferrule; non-bendable tip 1.0 12PBT43TMB5 Detailed Dimensions Online Shrink Junction 191 1000 ø3.6 Stainless Braid Over Monocoil ø2.9 Stainless Braid Over Monocoil30.0 15.5 ø 4.6ø 2.2 ø 4.0 17.0 2.0 M6 x 0.75 50 200 100 150 250  Thread 1.0 12PBTA43TMB5 Detailed Dimensions Online Shrink Junction 191 1000 ø3.6 Stainless Braid Over Monocoil ø2.9 Stainless Braid Over Monocoil30.0 15.5 ø 4.6ø 2.2 25.4 ø 3.0 stainless steel 25.417.0 R 12.7 M6 x 0.75 stainless steel 50 200 100 150 250  Thread/90° Angle 1.0 12PBTP43TMB5 Detailed Dimensions Online Shrink Junction 191 1000 ø3.6 Stainless Braid Over Monocoil ø2.9 Stainless Braid Over Monocoil30.0 15.5 ø 4.6ø 2.2 17.0 89 M6 x 0.75 stainless steel ø 3.0 50 200 100 150 250  Thread; bendable tip 0.5 12PBT26UHT1 Detailed Dimensions Online 2X ø 1.0cross-linked polyethylene 11.02000 M3 x 0.5 stainless steel 20 100 40 60 80 120  Thread; withstands 125° C (257° F)1.0 25PBT46UHT1 Detailed Dimensions Online ø 4.0 2X ø 2.2cross-linked polyethylene 14.0 3.02000 M6 x 0.75 stainless steel 50 200 100 150 250  Thread; withstands 125° C (257° F) STEELSKIN Indicates lens available for model. See page 189 for details. Indicates fiber can be Free Cut using Fiber Cutter. See page 197. NA: WORLD-BEAM QS18 not recommended.

189More information online at bannerengineering.com Plastic Fiber Optics WORLD-BEAM® QS18 MINI-BEAM® Expert™ Discrete Bargraph Super High Speed High Speed High Power Super High Power D10 SERIES FI22 CORE DIA. MIN. BEND MODEL NUMBER DRAWING & DIMENSIONS (mm) RADIUS (mm) FEATU RES TYPICAL RANGE (mm) DIFFUSE FLAT PACK LIQUID LEVEL 1.0 25PBE46UTMLLP Detailed Dimensions Online 2X ø 2.2 ø 5.7 FEP †Teflon® polyethylene 2000 1830 Do not bend this area 16.5 6.0 ø 6.0  Fluoropolymer encapsulated  Sensor switches when tip of fiber is immersed in liquid 1.0 25PBE46UTMLLPHT1 Detailed Dimensions Online 2X ø 2.2 ø 5.7 FEP †Teflon® polyethylene 2000 1830 Do not bend this area 16.5 6.0 ø 6.0  Fluoropolymer encapsulated; withstands 125° C (257° F)  Sensor switches when tip of fiber is immersed in liquid 0.5 12 PBT26UM6M.1 and TGR3/8MPFMQ Detailed Dimensions Online ø 4.0 14.0 3.02000 M6 x 0.75 nickel plated brass 2X ø 2.2polyethylene  Quartz probe; polypropylene housing  Sensor switches when tip of quartz is immersed in liquid 1.0 1PDI46U-LLD Detailed Dimensions Online ø 2.2 polyethylene plastic 4.2 9.02000 7.3 5.1 15.2  Clear tube mount; DURA-BEND fiber  Sensor switches when liquid meniscus reaches optical axis 0.5 12PBRS26U Detailed Dimensions Online plastic 2000 25.0 9.0 5.0 7.5 1.6 2X ø 1.0 polyethylene 3.2 Outer: 2X ø 4.4 Inner: 2X ø 3.2 2X ø 0.5 fibers 10 50 20 30 40 60  3.2 mm thickness; DURA-BEND fiber 1.0 25PBE46UTMNL Detailed Dimensions Online 2X ø 2.2 ø 5.7 FEP Teflon polyethylene 2000 1830 18.0 ø 6.0 50 350 100 150 200 250 300 400  Fluoropolymer encapsulated tip ref. model PBCT26U ref. model PBCT26U L4C6 Detailed Dimensions Online 9.211.0 20.2 ø 6.0 lens optic ø 4.0  Anodized AL housing; ø 0.25 mm beam spot @ 6 mm  Fixed focus ref. model PBCT26U ref. model PBCT26U L4C20 Detailed Dimensions Online 4.79.0 13.7 ø 6.0 lens optic ø 4.0  Anodized AL housing; ø 4 mm beam spot @ 20 mm  Fixed focus ref. model PBCT26- UM3 ref. model PBCT26- UM3 LZ3C8 Detailed Dimensions Online 2.0 ø 4.5 glass lens2X ø 3.1 12.5 5.4 M3 x 0.5 thread 6.0 8.6 15.5 black anodized aluminum  Anodized AL housing; ø 0.5 - 3.2 mm adj. beam spot  Adjustable focus CHEMICAL RESISTANTCONVERGENT SPOT LENS 6.4 7.6 11.4 3.0 31.6 3/8 - 32 polypropylene 2 nylon jam nuts ø 3.0 A A — - — A CROSS-SECTION DETAIL 15.7 12.7 o-ring quartz glass rod stainless steel collar M6 x 0.75 A Indicates fiber can be Free Cut using Fiber Cutter. See page 197. NA: WORLD-BEAM QS18 not recommended. NA: D10—Discrete not recommended.

190 More information online at bannerengineering.com Plastic Fiber Optics CORE DIA. MIN. BEND MODEL NUMBER DRAWING & DIMENSIONS (mm ) RADIUS (mm) FEATURES TYPICAL RANGE (mm) OPPOSED STANDARD 0.25 8PIA16U Detailed Dimensions Online R 3.5 4.8 ø 1.0 ø 0.91ø 1.42 polyethylene 2000 25 7.6 53 5 10 15 20 25 30 40  90° Angle 0.5 12PIA26U Detailed Dimensions Online R 3.5 4.8 ø 1.0 ø 0.91 polyethylene 2000 25 4020 160 14060 10080 120 180  90° Angle 0.25 8PIAT16U Detailed Dimensions Online 9.6 ø 1.0 ø 1.47 polyethylene stainless steel 2000 25.4 R 5.1 11.0M3 x 0.5 nickel plated brass 20 80 40 60 100  90° Angle/Thread 0.5 12PIAT26U Detailed Dimensions Online 9.6 ø 1.0 ø 1.47 polyethylene stainless steel 25.4 2000 R 5.1 11.0M3 x 0.5 nickel plated brass 50 250 100 150 200 300  90° Angle/Thread 1.0 25PIAT46U Detailed Dimensions Online ø 2.2 ø 3.3 polyethylene stainless steel 2000 13.9 16.5 ø 1.47 25.4 R 12.7 10.9 3.0 M4 x 0.7 stainless steel M2.5 x 0.45 200 800 400 600 1000  90° Angle/Thread 1.0 25PIAT46UM.4X.4MT Detailed Dimensions Online 10.1 ø 3.2 ø 1.47 stainless steel 2000 12.7 10.1 R 7.9 5.1 3.0 ø 4.0 M2.5 x 0.045 stainless steel ø 2.2 polyethylene 200 800 400 600 1000  90° Angle/Thread 1.5 38PIAT66U Detailed Dimensions Online 25.4 ø 2.2 ø 3.3 ø 1.47 polyethylene stainless steel 2000 13.9 25.4 R 19.1 10.9 3.0 M4 x 0.7 stainless steel M2.5 x 0.45 500 1000 1500 2000  90° Angle/Thread; long range 0.25 8PIF16U Detailed Dimensions Online ø 1.0 polyethylene 15.02000 ø 2.0stainless steel 2010 80 7030 50 40 60 90  Smooth ferrule 0.5 12PIF26U Detailed Dimensions Online ø 1.0 polyethylene 17.02000 ø 2.2stainless steel 50 350 100 150 200 250 300 400  Smooth ferrule 0.5 12PIF26UMLS Detailed Dimensions Online 15.02000 ø 3.0 stainless steelø 2.2 polyethylene 50 350 100 150 200 250 300 400  Smooth ferrule; thick jacket (ø 2.2 mm) WORLD-BEAM® QS18 MINI-BEAM® Expert™ Discrete Bargraph Super High Speed High Speed High Power Super High Power D10 SERIES FI22 Indicates lens available for model. See page 195 for details. Indicates fiber can be Free Cut using Fiber Cutter. See page 197. NA: WORLD-BEAM QS18 not recommended.

191More information online at bannerengineering.com Plastic Fiber Optics CORE DIA. MIN. BEND MODEL NUMBER DRAWING & DIMENSIONS (mm) RADIUS (mm) FEATU RES TYPICAL RANGE (mm) OPPOSED PROBE STANDARD 1.0 25PIF46U Detailed Dimensions Online 17.02000 ø 3.18stainless steelø 2.2 polyethylene 200 1000 400 600 800 1200  Smooth ferrule 1.5 38PIF66U Detailed Dimensions Online 15.02000 ø 3.18 stainless steelø 2.2 polyethylene 500 2000 1000 1500 2500  Smooth ferrule; long range 1.0 25PIFM46U Detailed Dimensions Online 15.02000 ø 3.0 stainless steel ø 2.2 polyethylene 200 1000 400 600 800 1200  Smooth ferrule; miniature tip1.0 25PIL46U Detailed Dimensions Online M8 x 1 acrylic lensø 2.2 ø 10.8 polyethylene plastic plastic 7.6 12.719.12000 2000 100004000 6000 8000 12000  Plastic lens; ultra-long range  Lens available separately, see page 195. 0.25 8PIT16U Detailed Dimensions Online ø 1.0 polyethylene 10.02000 M2.5 x 0.45 stainless steel 2010 80 7030 50 40 60 90  Thread 0.5 12PIT26U Detailed Dimensions Online ø 1.0 polyethylene 11.02000 M3 x 0.5 nickel plated brass 50 350 100 150 200 250 300 400  Thread 0.25 8PIP16U Detailed Dimensions Online ø 1.0 polyethylene 7.6 25.42000 ø 0.91 ø 1.3 stainless steel (non-bendable) probe 2010 80 7030 50 40 60 90  Smooth ferrule; non-bendable tip 0.5 12PIP26U Detailed Dimensions Online ø 1.0 polyethylene 11.0 892000 M3 x 0.5 nickel plated brass ø 0.91 annealed stainless steel (bendable) probe 50 350 100 150 200 250 300 400  Thread; bendable tip 1.0 25PIP46U Detailed Dimensions Online ø 1.47 ø 2.2 polyethylene 14.0 892000 M4 x 0.7 nickel plated brass annealed stainless steel (bendable) probe 200 1000 400 600 800 1200  Thread; bendable tip 1.0 25PIT46U Detailed Dimensions Online ø 2.2 polyethylene 11.0 3.02000 M4 x 0.7 nickel plated brass M2.5 x 0.045 200 1000 400 600 800 1200  Thread 1.5 38PIT66U Detailed Dimensions Online ø 2.2 polyethylene 11.0 3.02000 M4 x 0.7 nickel plated brass M2.5 x 0.045 500 2000 1000 1500 2500  Thread; long range WORLD-BEAM® QS18 MINI-BEAM® Expert™ Discrete Bargraph Super High Speed High Speed High Power Super High Power D10 SERIES FI22 Indicates lens available for model. See page 195 for details. Indicates fiber can be Free Cut using Fiber Cutter. See page 197. NA: WORLD-BEAM QS18 not recommended.

192 More information online at bannerengineering.com Plastic Fiber Optics Indicates lens available for model. See page 195 for details. Indicates fiber can be Free Cut using Fiber Cutter. See page 197. NA: WORLD-BEAM QS18 not recommended. OPPOSED HIGH-FLEX SIDE-VIEW 0.5 12PLIS-1 Detailed Dimensions Online 2000 31.4 8.2 ø 1.0 ø 2.3 beam exit polyethylene stainless steel 4.0 3.0 3.0 250 1250 500 750 1000 1500  Low beam divergence angle of 2°  Ideal for wafer mapping 0.5 12PIPS26U Detailed Dimensions Online ø 1.0 ø 2.5 polyethylene 2000 14.0 51 ø 0.91 2.5 3.0 stainless steel (non-bendable) probe stainless steel 20 40 60 80 100 120 140  Smooth ferrule; non-bendable tip1.0 25PIPS46U Detailed Dimensions Online ø 3.18polyethylene 2000 14.0 51 ø 1.47 stainless steel (non-bendable) probe stainless steel 2.5 3.0ø 2.2 ø 1.0 100 400 200 300 500  Smooth ferrule; non-bendable tip1.5 38PIPS66U Detailed Dimensions Online ø 3.0 polyethylene 2000 15.0 51 ø 2.11 stainless steel (non-bendable) probe stainless steel 2.5 3.0ø 2.2 200 800 400 600 1000  Smooth ferrule; non-bendable tip1.0 25PIPSB46U Detailed Dimensions Online ø 3.0polyethylene 2000 15.0 65.0 ø 1.27 annealed stainless steel (bendable) probestainless steel 2.0 2.5ø 2.2 5.0 10.2 bendable area 100 400 200 300 500  Smooth ferrule; bendable tip0.5 12PIPSM26U Detailed Dimensions Online ø 1.0 ø 2.49 polyethylene 2000 stainless steel 15.0 15.0 ø 0.82 20 40 60 80 100 120 140  Miniature smooth ferrule; non-bendable tipref. model PIT46U ref. model PIT46U L2RA Detailed Dimensions Online 8.0 2.5 ø 4.0 ø 2.8 lens optic  Compact glass prism  M2.5 thread 4X 0.25 8PIFM1X46U Detailed Dimensions Online ø 1.0 polyethylene 10.02000 ø 1.5stainless steel 50 100 150 200 250 300 350  Best for repetitive flexing (1,000s of cycles) 4X 0.25 8PIT1X46U Detailed Dimensions Online ø 1.0 polyethylene 10.02000 M3 x 0.5 nickel plated brass 50 100 150 200 250 300 350  Best for repetitive flexing (1,000s of cycles) 1.0 25PIP46UC Detailed Dimensions Online ø 2.2 polyethylene 2000 fully extended200 ø 23 280 14.0 89 ø 1.47 M4 x 0.7 nickel plated brass annealed stainless steel (bendable) probe 100 700200 300 400 500 600 800  For applications involving reciprocating motion 1.0 25PIT46UC Detailed Dimensions Online ø 2.2 polyethylene 2000 fully extended200 ø 23 280 M4 x 0.7 nickel plated brass 11.0 3.0 M2.5 x 0.045 100 700200 300 400 500 600 800  For applications involving reciprocating motion CORE DIA. MIN. BEND MODEL NUMBER DRAWING & DIMENSIONS (mm ) RADIUS (mm) FEATURES TYPICAL RANGE (mm) WORLD-BEAM® QS18 MINI-BEAM® Expert™ Discrete Bargraph Super High Speed High Speed High Power Super High Power D10 SERIES FI22

193More information online at bannerengineering.com Plastic Fiber Optics CORE DIA. MIN. BEND MODEL NUMBER DRAWING & DIMENSIONS (mm) RADIUS (mm) FEATU RES TYPICAL RANGE (mm) OPPOSED CHEMICAL RESISTANT DURA-BEND 1.0 1PIAT46UHF Detailed Dimensions Online ø 2.2 ø 3.3 polyethylene stainless steel 2000 13.9 16.5 ø 1.47 25.4 R 12.7 10.9 3.0 M4 x 0.7 stainless steel M2.5 x 0.45 200 800 400 600 1000  90° Angle/Thread 1.0 1PIF46UHF Detailed Dimensions Online 17.02000 ø 3.18stainless steelø 2.2 polyethylene 200 800 400 600 1000  Smooth ferrule 1.0 1PIFM46UHF Detailed Dimensions Online 15.02000 ø 3.0 stainless steel ø 2.2 polyethylene 200 800 400 600 1000  Smooth ferrule; miniature tip 1.0 1PIP46UHF Detailed Dimensions Online ø 1.47 ø 2.2 polyethylene 14.0 892000 M4 x 0.7 nickel plated brass annealed stainless steel (bendable) probe 200 800 400 600 1000  Thread; bendable tip 1.0 1PIPS46UHF Detailed Dimensions Online ø 3.18polyethylene 2000 14.0 51 ø 1.47 stainless steel (non-bendable) probe stainless steel 2.5 3.0ø 2.2 ø 1.0 10050 400 350150 250200 300 450  Smooth ferrule; non-bendable tip1.0 1PIPSB46UHF Detailed Dimensions Online ø 3.0polyethylene 2000 15.0 65.0 ø 1.27 annealed stainless steel (bendable) probestainless steel 2.0 2.5ø 2.2 5.0 10.2 bendable area 10050 400 350150 250200 300 450  Smooth ferrule; bendable tip0.5 1PIT26UHF Detailed Dimensions Online ø 1.0 polyethylene 11.02000 M3 x 0.5 nickel plated brass 50 250 100 150 200 300  Thread 1.0 1PIT46UHF Detailed Dimensions Online ø 2.2 polyethylene 11.0 3.02000 M4 x 0.7 nickel plated brass M2.5 x 0.045 200 800 400 600 1000  Thread 1.0 25PIE46UT Detailed Dimensions Online ø 2.2 ø 4.0 FEP Teflon® polyethylene 2000 1830 22.0 ø 5.0 lens 500 2500 1000 1500 2000 3000  Fluoropolymer encapsulated; lens1.5 38PIE66UTMNL Detailed Dimensions Online ø 2.2 ø 4.0 FEP† Teflon® polyethylene 2000 1830 18.0 ø 5.0 200 400 600 800 1000 1200 1400  Fluoropolymer encapsulated; large effective beam 1.0 25PIES46UT Detailed Dimensions Online ø 2.2 ø 4.0 FEP† Teflon® polyethylene 2000 1830 22.0 ø 5.0 L2RA side-view prism 100 500 200 300 400 600  Fluoropolymer encapsulated; side-view prism WORLD-BEAM® QS18 MINI-BEAM® Expert™ Discrete Bargraph Super High Speed High Speed High Power Super High Power D10 SERIES FI22 Indicates lens available for model. See page 195 for details. Indicates fiber can be Free Cut using Fiber Cutter. See page 197. NA: WORLD-BEAM QS18 not recommended.

194 More information online at bannerengineering.com Plastic Fiber OpticsOPPOSED HIGH TEMP AREA SENSING ( ARRAY ) 16X 0.265 25PIR1X166U Detailed Dimensions Online ø 2.2 polyethylene aluminum 8.0 2000 15.0 5.25 5.015.0 2.5 16X ø 0.265 3X M3 x 0.5 10.0 200100 800 700300 500400 600 900  Ultra-compact head; straight exit; 5.25 mm width16X 0.265 25PIRS1X166U Detailed Dimensions Online ø 2.2 polyethylene aluminum 8.0 2000 15.0 5.0 15.0 2.5 3X M3 x 0.5 10.0 (0.39) 5.25 16X ø 0.265 200100 800 700300 500400 600 900  Ultra-compact head; side exit; 5.25 mm width 16X 0.265 25PIRS1X166UM.4 Detailed Dimensions Online 20.0 10.0 4.2 20.0 4.0 2000ø 2.2 R 3.6 polyethylene 2X ø 3.175 ø 7.1 countersink both sides 16X ø .265 200100 800 700300 500400 600 900  Compact head; side exit; 10 mm width 16X 0.265 25PIRS1X166UMPM.75 Detailed Dimensions Online ø 2.2polyethylene plastic 256.3 2000 19.0 38.0 2.5 2X ø 3.0 R 1.5 5.1 9.5 1.25 19 (REF) 16X ø 0.265 200100 800 700300 500400 600 900  Side exit; 19 mm width 16X 0.265 25PIRS1X166UMPMAL Detailed Dimensions Online ø 2.2polyethylene plastic 256.3 2000 19.0 38.0 2.5 2X ø 3.0 R 1.5 5.1 2.2 16X ø 0.265 34 (REF) 200 800 400 600 1000  Side exit; 34 mm width 0.5 12PIT26UHT1 Detailed Dimensions Online ø 1.0 cross-linked polyethylene 11.02000 M3 x 0.5 stainless steel 50 200 100 150 250  Thread; withstands 125° C (257° F)1.0 25PIT46UHT1 Detailed Dimensions Online ø 2.2 cross-linked polyethylene 11.0 3.02000 M4 x 0.7 nickel plated brass M2.5 x 0.045 200100 800 700300 500400 600 900  Thread; withstands 125° C (257° F)1.0 25PDIS46UM12 Detailed Dimensions Online 2X ø 2.2 polyethylene 7.018.0 24.0 2000 sensing beam ø 1.0 fibers 32.0 24.0 24.0 5.0 2X ø 3.5 plastic  Easy mount “fork” head; DURA-BEND fiber 1.0 25PDISM46UM5MA Detailed Dimensions Online 2X ø 2.2 polyethylene plastic 26.2 18.4 14.58.3 2000 18.45.019.0 6.2 7.2 2X ø 1.0 fibers 2X ø 3.2 3.6 3.5 4X R 1.6 2X 0.8 7.0 6.4  90° Angle; compact “fork” head; DURA-BEND fiber CORE DIA. MIN. BEND MODEL NUMBER DRAWING & DIMENSIONS (mm ) RADIUS (mm) FEATURES TYPICAL RANGE (mm) SLOT WORLD-BEAM® QS18 MINI-BEAM® Expert™ Discrete Bargraph Super High Speed High Speed High Power Super High Power D10 SERIES FI22 Indicates lens available for model. See page 195 for details. Indicates fiber can be Free Cut using Fiber Cutter. See page 197. NA: WORLD-BEAM QS18 not recommended.

195More information online at bannerengineering.com Plastic Fiber Optics CORE DIA. MIN. BEND MODEL NUMBER DRAWING & DIMENSIONS (mm) RADIUS (mm) FEATU RES TYPICAL RANGE (mm) OPPOSED DUAL INDIVIDUAL STEELSKIN 1.0 12PIAT43TMB5 Detailed Dimensions Online 16.5 ø 1.5 25.0 R 12.6 ø2.9 Stainless Braid Over Monocoil 14.0 ø 4.0 ø 3.2 stainless steel 22.930.0 1000 15.5 ø 4.6 stainless steel ø 2.2 14.0 3.0 M4 x 0.7 stainless steel M2.5 x 0.45 200 800 400 600 1000  90° Angle/Thread 1.0 12PIF43TMB5 Detailed Dimensions Online ø2.9 Stainless Braid Over Monocoil 15.0 ø 4.0 ø 3.0 stainless steel 6.6 30.0 1000 15.5 ø 4.6ø 2.2 200 800 400 600 1000  Smooth ferrule 1.0 12PIPS43TMB5 Detailed Dimensions Online ø2.9 Stainless Braid Over Monocoil 21.3 51 stainless steel30.0 1000 ø 4.6 15.5 2.5 3.2ø 4.0 stainless steel (non-bendable) probeø 2.2 ø 3.2 ø 1.5 10050 400 350150 250200 300 450  Smooth ferrule; non-bendable tip 1.0 12PIT43TMB5 Detailed Dimensions Online ø2.9 Stainless Braid Over Monocoil ø4.0 30.0 1000 13.0 3.0 M2.5 x 0.45 15.5 22.0 M4 x 0.7 ø 4.6ø 2.2 200 800 400 600 1000  Thread 1.0 12PITA43TMB5 Detailed Dimensions Online 25.4 ø 1.47 stainless steel 25.4 R 12.7 ø2.9 Stainless Braid Over Monocoil 14.0ø 4.0 M4 x 0.7 stainless steel 20.630.0 1000 15.5 ø 4.6ø 2.2 200 800 400 600 1000  Thread/90° Angle 1.0 12PITP43TMB5 Detailed Dimensions Online 1000 20.630.0 15.5 M4 x 0.7 stainless steel ø 1.9 89.0 6.6 14.0ø2.9 Stainless Braid Over Monocoil ø 4.6ø 2.2 ø 4.0 annealed stainless steel (bendable) probe 200 800 400 600 1000  Thread; bendable tip 0.5 12PDIT26T5 Detailed Dimensions Online 2X ø 1.0 polyethylene 2X 11.02000 2X M3 x 0.5 nickel plated brass 30.0 15.5 ø 4.6 ø 2.2 50 250 100 150 200 300  Accomplish 2 inspections using only one sensor 1.0 25PDIT4100U Detailed Dimensions Online 2X ø 2.2 polyethylene 11.0 3.0 305 30480 M4 x 0.7 nickel plated brass M2.5 x 0.045 Contact factory for sensing range. 30 m duplex fiber cable VACUUM 1.5 38PIF66UM.52M.19D Detailed Dimensions Online 13.22000 ø 4.75stainless steel ø 2.2 polyethylene Contact factory for sensing range.  For use with VFT-M8MVS (ambient side) See page 203. EXTENDED RANGE LENS ref. model PIL46U ref. model PIL46ULO8FP Detailed Dimensions Online XX.X lens optic M8 x 1nut compression washer compression gasket mounting nuts  Ultra-long range- extending lens; use with raw plastic fiber ref. model PIT46U ref. model PIT46UL2 Detailed Dimensions Online 9.2 ø 4.3 lens optic ø 4.0  Range-extending lens  M2.5 thread WORLD-BEAM® QS18 MINI-BEAM® Expert™ Discrete Bargraph Super High Speed High Speed High Power Super High Power D10 SERIES FI22 Indicates lens available for model. See this page for details. Indicates fiber can be Free Cut using Fiber Cutter. See page 197. NA: WORLD-BEAM QS18 not recommended. NA: MINI-BEAM Expert™ not recommended.

196 More information online at bannerengineering.com Plastic Fiber Optics Indicates lenses available for model. See page 195 for details. NA: WORLD-BEAM QS18 not recommended. NA: MINI-BEAM Expert™ not recommended. * Fibers are sold separately, must order two fibers to form a pair. DIFFUSE HIGH-TEMP HIGH-TEMP 1.57 19BMT16.6S-HT Detailed Dimensions Online stainless steel PVC shrink junction ø 4.2 M4 x 0.7 stainless steel 15.038 150 2000 ø 3.0 30.0 15.5 ø 4.6ø 2.2 100 200 300 400  High performance glass fiber optics for use with Banner D10 plastic fiber sensors  Miniature thread; end tip withstands 315° C (600° F) 1.27 19IMT.756.6S-HT* Detailed Dimensions Online stainless steel ø 3.0 ø 4.2 2000 12.0 3.0 M4 x 0.7 stainless steel M2.5 x 0.045 30.0 15.5 ø 4.6ø 2.2 200 800 400 600 1000  High performance glass fiber optics for use with Banner D10 plastic fiber sensors  Miniature thread; end tip withstands 315° C (600° F) CORE DIA. MIN. BEND MODEL NUMBER DRAWING & DIMENSIONS (mm ) RADIUS (mm) FEATURES TYPICAL RANGE (mm) OPPOSED WORLD-BEAM® QS18 MINI-BEAM® Expert™ Discrete Bargraph Super High Speed High Speed High Power Super High Power D10 SERIES FI22

197More information online at bannerengineering.com Plastic Fiber Optics PFK20 FIBER CUTTERS  For use with 1 mm and 1.5 mm diameter cables.  These kits are used with unterminated plastic fiber cables.  Each kit contains 40 bushings and 10 cutter assemblies (cutters can be purchased separately in packages of 25 - reference model PFC-2-25)  For use with 0.25 mm and 0.5 mm diameter cables. MODEL NUMBER MODEL SPECIFIC FEATURES GENERAL FEATURES DRAWING MODEL NUMBER CORE LENGTH TYPE DRAWINGFIBER OPTIC ACCESSORIES UNTERMINATED INDIVIDUAL AND BIFURCATED PLASTIC FIBERS PLASTIC FIBER FIELD- INSTALLABLE SHEATHING PFS69S6T PLASTIC FIBER ADAPTERS UPFA-1-100 Fiber end Adapter  Compression fitting adapters are used with small-diameter unterminated plastic fiber cables.  Use when interfacing small-diameter plastic fibers to D10, D11, D12, PC44, QM42, Q23, QS18, R55F, FI22, and MINI-BEAM plastic fiber sensor families.  Each kit contains 100 pairs of adapters. One pair will interface either one bifurcated fiber optic cable or a pair of individual cables to a fiber optic amplifier. 0.5 mm 9 m 18 m Single PIU230U PIU260U 1.0 mm 9 m 18 m Single PIU430U PIU460U 1.5 mm 9 m 18 m Single PIU630U PIU660U 1.0 mm 9 m 18 m Duplex PBU43OU PBU460U  Stainless-steel sheathing with stainless- steel end fittings (one end internally threaded to capture fiber end tips, other end non-threaded) is used in applications where protection is required for plastic fiber optic cables.  All models listed are 1.8 m in length.  Other lengths are available by contacting Banner Applications Department.  May be used with bifurcated fiber assemblies having M6 x 0.75 threaded end tips (e.g., PBCT46U, PBP46U, PBT46UHT1, and PBT66U).  May be used with individual or bifurcated fiber assemblies having M4 x 0.7 threaded end tips (e.g., PBCT26U, PBPF26U, PIP46U, PIT46U, and PIT66U).  May be used with individual fiber assemblies having M3 x 0.5 threaded end tips (e.g., PIP26U, PIT26U and PIT1X46U).  Use to adapt plastic fiber optic cables with outside jacket diameter of 1.0 mm, such as PIT26U and PBP16U.  Use to adapt plastic fiber optic cables with outside jacket diameter of 1.25 mm or 1.3 mm, such as PBCT26U and PBF46UM3MJ1.3. PFS53S6T PFS44S6T UPFA-2-100 NOTE: Bushings used with Q45, OMNI-BEAM, ECONO-BEAM, MAXI-BEAM and VALU-BEAM sensors only. MODEL NUMBER MODEL SPECIFIC FEATURES GENERAL FEATURES DRAWING PFK40

198 More information online at bannerengineering.com Glass Fiber Optics Glass Fiber Optics  Solve numerous challenging sensing applications in the most hostile environments, including temperatures up to 480° C, corrosive materials and extreme moisture  Withstand severe shock and vibration  Ignore extreme electrical noise  Constructed of a combination of optical glass fiber, stainless steel, PVC, brass, molded thermoplastics and optical-grade epoxy * Individual glass fibers are packaged separately. FIBER BUNDLE DIAMETER designator .44 = 0.7 mm .5 = 0.8 mm .75 = 1.2 mm 1 = 1.6 mm 1.5 = 2.3 mm 2 = 3.2 mm 2.5 = 4.0 mm ASSEMBLY STYLE designator B = Bifurcated fiber I = Individual fiber* OVERALL LENGTH designator (in feet) 2 = 2 ft. = 610 mm ±38 mm 3 = 3 ft. = 914 mm ±38 mm MODIFICATIONS designator “MXX” = Sensing end tip modification “M600” Sensing end withstands 315° C “M900” = Sensing end withstands 480° C SENSING END TIP STYLE designator A = 90° Angle AM = Miniature 90° Angle AT = 90° Angle/Thread F = Ferrule M = Miniature Tip MP = Miniature Probe MT = Miniature Thread R = Rectangular Bundle Termination T = Thread TA = Thread/90° Angle TETA = Thread and Extra Tight 90° Angle SHEATHING MATERIAL designator S = Stainless steel flexible conduit P = PVC with galvanized monocoil reinforcing wire I A T 2 3 S X X Glass Fiber Optic Model Key

199More information online at bannerengineering.com Glass Fiber Optics Glass Fiber Optics Specifications Construction Combination of optical glass fiber, stainless steel or PVC, brass, molded thermoplastics, and optical-grade epoxy. Optical fiber is F2 core, EN1 clad, approx. 50 µm diameter per strand. Flexible steel interlock sheathing is 302 stainless. Sensing Range Refer to the specific fiber optic to be used. Bend Radius Inside bend radius must b 12 mm or greater for PVC covered fiber optic assemblies, and 25 mm or greater for stainless steel armored cable covered fibers. Length Standard length for assemblies is 915 mm; see dimension diagrams. Most models are available from the factory with shorter or longer cable lengths, up to 18 m max. Length Dimension Tolerance Overall assembly length: ±12 mm per 300 mm of length Shrink junction dimensions: ±12 mm Implied Dimensional Tolerances Operating Conditions Fiber assemblies with stainless-steel (SS) sheathing and metal end tips: -140° to +249° C Fiber assemblies with PVC sheathing and/or plastic end tips: -40° to +105° C Special order assemblies with SS sheathing and metal end tips and model suffix “M600”: -140° to +315° C* Special order assemblies with SS sheathing and metal end tips and model suffix “M900”: -140° to +480° C*; note dimensional changes from STD models * sensing end tip only ! APPLICATION NOTES AND WARNINGS ! The ends of glass fiber optic assemblies are optically ground and polished. Care taken in this manufacturing process accounts for the light coupling efficiency of the fiber optic assembly. As a result, glass fiber assemblies cannot be shortened, spliced, or otherwise modified. Use caution when applying fiber optics in hazardous locations. Although fiber optic assemblies are, by themselves, intrinsically safe, the sensor and associated electronics must be LOCATED IN A SAFE ENVIRONMENT. Alternatively, fiber optics may be used with sensor model SMI912FQD (page 32). This sensor is approved for use inside hazardous areas when used with an appropriate intrinsic barrier. Also, see NAMUR sensor models Q45AD9F (page 152) and MIAD9F (page 86). Fiber optics do not necessarily provide a hermetic seal between a hazardous environment and the safe environment. In applications where glass fibers to insulate the control from high voltage, specify silicone rubber, Teflon ®, or high-density polyethylene sheathing with no reinforcing wire in the cable. It is the responsibility of the user to test each fiber optic assembly for insulation capacity. Do not subject the fibers to sharp bends, pinching, repeated flexing or high levels of radiation. When ordering fiber lengths in excess of 1 m, take into account light signal reduction of 5 percent per 300 mm of additional length.

200 More information online at bannerengineering.com Glass Fiber Optics Indicates lenses available for model. See page 201 for details. R55F SME312 D12E D12 SETUP DO LO OFF Delay Switch Point DYNAMIC STATIC QS18* DIFFUSE AREA SENSING (ARRAY ) STANDARD 3.18 19BA23S Detailed Dimensions Online PVC shrink junction 38.1 191 914 12.7 27.9 R 12.7ø 4.8 20.3 ø 6.4 stainless steel ø 7.4ø 4.7 12.712.7 50 100 150 200  90° Angle 3.18 19BAT23S Detailed Dimensions Online ø 6.4 stainless steel 914 5/16-24 UNF brass 2 brass jam nuts included 20.3ø 4.8 12.7 27.9 R 12.7 38.1 ø 7.4 ø 7.4ø 4.7 38.112.712.7 191 PVC shrink junction 50 100 150 200  90° Angle/Thread 3.18 19BF23P Detailed Dimensions Online ø 5.8 PVC with monocoil PVC shrink junctionø 7.4ø 4.7 38.112.712.7 191 914 ø 7.4 ø 4.8 12.712.7 ø 3.18 50 100 150 200  Smooth ferrule 0.69 9.5BMT.442P Detailed Dimensions Online ø 3.0 PVC with monocoil 610 PVC shrink junction 38.1 191 12.7 16.5 ø 4.7ø 7.4 ø 3.8 #8-32 thd brass 2 jam nuts included 12.712.7 28 46 1 0  Miniature thread 3.18 19BT23S Detailed Dimensions Online ø 8.0ø 6.4 stainless steel 5/16-24 thd brass 2 jam nuts included 38.112.7 914 ø 3.18PVC shrink junction ø 7.4ø 4.7 38.112.712.7 191 50 100 150 200  Thread 3.18 19BTA23S Detailed Dimensions Online R 9.7ø 8.0 ø 6.4 stainless steel 5/16-24 thd brass 2 jam nuts included 38.1 15.8 27.9 12.7 914 ø 4.8 PVC shrink junctionø 7.4ø 4.7 38.112.712.7 191 50 100 150 200  Thread/90° Angle 1.17 19BAM.752S Detailed Dimensions Online ø 8.0 ø 1.5ø 6.4 stainless steel 25.435.6 610 R 3.05 4.8 ø 7.4ø 4.7 38.112.712.7 191 PVC shrink junction 10 40 20 30 50  ø 1.5 mm non-bendable probe; 90° angle 1.17 19BM.752S Detailed Dimensions Online ø 7.4 stainless steel 25.412.7 12.7 610 ø 7.4ø 4.7 38.112.712.7 191 ø 4.6 ø 1.5 PVC shrink junction ø 6.4 10 40 20 30 50  ø 1.5 mm non-bendable probe1.17 9.5BMP .753P Detailed Dimensions Online ø 1.5 PVC with monocoil 914 25.412.7 PVC shrink junction 38.1 191 12.7 16.5 ø 3.0 ø 3.8 ø 4.7ø 7.4 10 40 20 30 50  ø 1.5 mm non-bendable probe3.96 19BR2.53S Detailed Dimensions Online ø 6.4 stainless steel PVC shrink junctionø 4.7 ø 7.4 38.112.712.7 191 914 25.4 12.7 50.8 2x 4.8 6.4 38.1 0.25 38.1 9.4 50 200 100 150 250  Straight exit; 38 mm width3.18 19BR23S Detailed Dimensions Online ø 6.4 stainless steel PVC shrink junctionø 7.4ø 4.7 38.112.712.7 191 914 2.54 19.1 11.7 2x 3.2 0.8 6.3 19.1 9.7 50 100 150 200  Straight exit; 10 mm width CORE DIA. MIN. BEND MODEL NUMBER DRAWING & DIMENSIONS (mm) RADIUS (mm) FEATU RES TYPICAL RANGE (mm) MINIATURE PROBE M600 M900 M600 M900 M600 M900 M600 M900 M600 M900 M600 M600 M600 M600 M600 Available 315° C (600°F) models. Add M600 to end of model number (ex: BA23SM600). M900 Available 480° C (900°F) models. Add M900 to end of model number (ex: BA23SM900). * Range data for QS18F not available at printing.

201More information online at bannerengineering.com Glass Fiber Optics CORE DIA. MIN. BEND MODEL NUMBER DRAWING DIMENSIONS (mm) RADIUS (mm) FEATURES TYPICAL RANGE (mm) D I F F U S E s i d e - v i e w 2.29 19BA1.53SMETA Detailed Dimensions Online 914 25.4 ø 5.3 ø 5.1 ø 4.8 ø 3.05 stainless steel 12.7 PVC shrink junction ø 7.4ø 4.7 38.112.712.7 191 25 12550 75 100 150

• Ultra-compact head 2.29 19BA1.53SMTA Detailed Dimensions Online 914 35.1 ø 5.3 ø 6.4 ø 3.05 stainless steel PVC shrink junctionø 7.4ø 4.7 38.112.712.7 191 25 12550 75 100 150
• Compact head 2.29 19BTETA1.53S Detailed Dimensions Online ø 8.0ø 6.4 stainless steel 5/16-24 thd brass 2 jam nuts included 38.112.7 914 25.4 ø 4.8 ø 3.05 5.3 PVC shrink junction ø 7.4ø 4.7 38.112.712.7 191 25 12550 75 100 150
• Ultra-compact head; thread 1.57 19BMT13SMVF Detailed Dimensions Online stainless steel ø 4.2 M4 x 0.7 stainless steel 15.0 150 914 ø 3.0 ø 3.0 Teflon shrink junction 29.0 ø 4.0ø 4.7
• Miniature thread; entire cable withstands 480° C (900° F) ref. glass fiber key or call factory ref. glass fiber key or call factory L10 Detailed Dimensions Online 45.7 ø 14.3 5/16" - 24 thread lens optic
• Glass lens; withstands 315° C (600° F) Focuses light to .80 mm with ø 1.6 mm fiber vacuumc ON ve RG e NT B eam s POT M600 M900 M600 M900 M600 M900 Contact factory representative for range information R55F SME312 D12E D12 SETUP DO LO OFF Delay Switch Point DYNAMIC STATIC QS18* M600 M900Available 315° C (600°F) models. Add M600 to end of model number (ex: BA23SM600). M600 M900 Available 480° C (900°F) models. Add M900 to end of model number (ex: BA23SM900). Glass Fiber Optics—Additional Models Available In addition to the configurations shown, Banner offers thousands of readily available alternative fiber models:
• Substitute PVC over monocoil sheathing for stainless steel.
• Reduce or increase glass fiber optic bundle diameters. Example: Change ø 3.18 mm bundle to ø 1.57 mm.
• Substitute a rectangular-shaped fiber bundle (0.5 mm x 2.5 mm) for a circular bundle.
• Change endtip material from brass to stainless steel.
• Modify straight or angled probe tip dimensions.
• Modify overall fiber length in intervals of 305 mm (standard lengths are 914 mm and 610 mm). More Models Available! * Range data for QS18F not available at printing.

202 More information online at bannerengineering.com Glass Fiber Optics Indicates lenses available for model. See page 203 for details. OPPOSED AREA DETECTION (ARRAY ) STANDARD 3.18 19IA23S Detailed Dimensions Online 914 12.7 27.9 R 12.7ø 4.87 20.3 ø 6.4 stainless steel ø 7.4ø 4.7 12.712.7 200 1000 400 600 800 1200  90° Angle 3.18 19IAT23S Detailed Dimensions Online ø 6.4 stainless steel ø 7.4ø 4.7 12.712.7 914 5/16-24 UNF brass 2 brass jam nuts included 20.3ø 4.8 12.7 27.9 R 12.7 38.1 ø 7.4 200 1000 400 600 800 1200  90° Angle/Thread 3.18 19IF23P Detailed Dimensions Online ø 5.8 PVC with monocoil ø 4.7 ø 7.4 ø 4.8 ø 7.4 12.712.7 914 12.712.7 200 1000 400 600 800 1200  Smooth ferrule 0.69 9.5IMT.442P Detailed Dimensions Online ø 3.0PVC with monocoil 914 12.7 16.5 ø 4.7ø 7.4 ø 3.8 #8-32 thd brass 2 jam nuts included 12.712.7 20 100 40 60 80 120  Miniature thread 3.18 19IT23S Detailed Dimensions Online ø 8.0ø 6.4 stainless steel ø 7.4ø 4.7 5/16-24 thd brass 2 jam nuts included 38.112.712.712.7 914 ø 3.18 200 1000 400 600 800 1200  Thread 3.18 19ITA23S Detailed Dimensions Online ø 8.0 ø 6.4 stainless steel 5/16-24 thd brass 2 jam nuts included 38.1 15.812.7 914 ø 7.4 12.712.7 27.9 ø 4.8 R 9.7 200 1000 400 600 800 1200  Thread/90° Angle 1.17 19IAM.752S Detailed Dimensions Online ø 8.0 ø 1.5ø 6.4 stainless steel ø 7.4ø 4.7 25.435.612.712.7 610 R 3.05 4.8 50 100 150 200  ø 1.5 mm non-bendable probe; 90° angle 1.17 19IM.752S Detailed Dimensions Online ø 7.4 ø 1.5ø 4.6 ø 6.4 stainless steel ø 7.4ø 4.7 610 50 100 150 200  ø 1.5 mm non-bendable probe1.17 9.5IMP .753P Detailed Dimensions Online ø 3.0 PVC with monocoil 914 12.7 16.5 ø 4.7ø 7.4 ø 3.8 ø 1.5 25.412.7 50 100 150 200  ø 1.5 mm non-bendable probe3.96 19IR2.53S Detailed Dimensions Online 12.712.7 ø 6.4 stainless steel ø 7.4ø 4.7 914 6.4 38.1 25.4 12.7 0.25 38.1 50.8 9.4 2x 4.8 200 1000 400 600 800 1200  Straight exit; 38 mm width3.18 19IR23S Detailed Dimensions Online ø 6.4 stainless steel 12.712.7 914 2.54 19.1 11.7 2x 3.2 0.8 6.3 19.1 9.7 ø 7.4ø 4.7 200 1000 400 600 800 1200  Straight exit; 10 mm width CORE DIA. MIN. BEND MODEL NUMBER DRAWING & DIMENSIONS (mm) RADIUS (mm) FEATU RES TYPICAL RANGE (mm) MINIATURE PROBE M600 M900 M600 M900 M600 M900 M600 M900 M600 M900 M600 M600 M600 M600 R55F SME312 D12E D12 SETUP DO LO OFF Delay Switch Point DYNAMIC STATIC QS18* M600 Available 315° C (600°F) models. Add M600 to end of model number (ex: BA23SM600). M900 Available 480° C (900°F) models. Add M900 to end of model number (ex: BA23SM900). * Range data for QS18F not available at printing.

203More information online at bannerengineering.com Glass Fiber Optics CORE DIA. MIN. BEND MODEL NUMBER DRAWING & DIMENSIONS (mm ) RADIUS (mm) FEATURES TYPICAL RANGE (mm) OPPOSED LIQUID LEVEL SIDE-VIEW 2.29 19IA1.53SMETA Detailed Dimensions Online 914 25.4 ø 5.3ø 5.1 ø 4.8 ø 3.05 5.3 stainless steel 12.7 ø 7.4 12.712.7 100 500 200 300 400 600  Ultra-compact head 2.29 19IA1.53SMTA Detailed Dimensions Online 914 35.1 ø 6.4stainless steelø 5.3 ø 3.05 7.1 100 500 200 300 400 600  Compact head 2.29 19ITETA1.53S Detailed Dimensions Online ø 8.0ø 6.4 stainless steel 5/16-24 thd brass 2 jam nuts included 38.112.7 914 25.4 ø 4.8 ø 3.05 5.3 ø 7.4ø 4.7 12.712.7 100 500 200 300 400 600  Ultra-compact head; thread ref. model IT23S ref. model IT23S Detailed Dimensions Online 45.7 ø 14.3 5/16" - 24 thread lens optic  Glass lens; withstands 315° C (600° F)ref. model IT23S ref. model IT23S L16F Detailed Dimensions Online 58.4 ø 28.6 5/16" - 24 thread lens optic  Plastic housing; withstands 105° C (220° F) ref. model IT23S ref. model IT23S L16FAL Detailed Dimensions Online 58.4 ø 28.6 5/16" - 24 thread lens optic  Aluminum housing; withstands 315° C (600° F) ref. model IT23S ref. model IT23S L16FSS Detailed Dimensions Online 58.4 ø 28.6 5/16" - 24 thread lens optic  Stainless steel housing; withstands 480° C (900° F) 3.56 -VFT-M8MVS Detailed Dimensions Online 10.0 35.0 4.04.0 12.7 40.0 22.23 ø 3.56 image conduit 9.53 4.75 #4-40 SS set screw stainless steel electropolish finish #4-40 SS set screw M8 x 1.25 4.75 Viton O-ring A — - — A CROSS-SECTION DETAIL A A  Seals to 1 x 10-9 torr; withstands 120° C (248° F) 1.27 19IMT.753SMVF Detailed Dimensions Online 29.0 914 12.010.0 3.0 M4 x 0.7 stainless steel M2.5 x 0.045ø 4.0ø 4.7 ø 3.0 stainless steel ø 4.2  Miniature thread; entire cable withstands 480° C (900° F) VACUUMEXTENDED RANGE LENS 3.18 -TGR Detailed Dimensions Online ø 9.7 ø 3.18 (±0.125) glass rod 5/16-24 brass internal thread 12.7 97.8 effective length 90°  Use with BT23S  Sensor switches when tip of glass rod is immersed in liquid VACUUM FEED THROUGH ACCESSORIES M600 M600 M600 Contact factory representative for range information R55F SME312 D12E D12 SETUP DO LO OFF Delay Switch Point DYNAMIC STATIC QS18* M600 Available 315° C (600°F) models. Add M600 to end of model number (ex: BA23SM600). M900 Available 480° C (900°F) models. Add M900 to end of model number (ex: BA23SM900). * Range data for QS18F not available at printing.

204 More information online at bannerengineering.com Fiber Systems