PBA30F RSG | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

MODEL PBA30F-3R3 PBA30F-5 PBA30F-9 PBA30F-12 PBA30F-15 PBA30F-24 PBA30F-48 MAX OUTPUT WATTAGE[W] 19.8 30 30.6 30 30 31.2 31.2 SPECIFICATIONS MODEL PBA30F-3R3 PBA30F-5 PBA30F-9 PBA30F-12 PBA30F-15 PBA30F-24 PBA30F-48 INPUT VOLTAGE[V] AC85 - 264 1 for DC110 - 370 (AC50 or DC70 Please refer to the instruction manual 2.1 Input voltage *3) CURRENT[A] ACIN 100V 0.50typ (Io=100%) 0.70typ (Io=100%) ACIN 200V 0.30typ (Io=100%) 0.40typ (Io=100%) FREQUENCY[Hz] 50/60 (47 - 440) or DC EFFICIENCY[%] ACIN 100V 68typ 74typ 75typ 76typ 78typ 78typ 79typ ACIN 200V 69typ 77typ 77typ 78typ 81typ 81typ 81typ INRUSH CURRENT[A] ACIN 100V 15typ (Io=100%)( At cold start ) ACIN 200V 30typ (Io=100%)( At cold start ) LEAKAGE CURRENT[mA] 0.30/0.65max (ACIN 100V/240V 60Hz, Io=100%, According to IEC60950-1,DENAN) OUTPUT VOLTAGE[V] 3 . 3 5 9 1 21 52 44 8 CURRENT[A] 6 6 3.4 2.5 2 1.3 0.65 LINE REGULATION[mV] 20max 20max 36max 48max 60max 96max 192max LOAD REGULATION[mV] 40max 40max 100max 100max 120max 150max 240max RIPPLE[mVp-p] 0t o+ 5 0C*1 80max 80max 120max 120max 120max 120max 150max -10 - 0C*1 140max 140max 160max 160max 160max 160max 200max RIPPLE NOISE[mVp-p] 0t o+ 5 0C*1 120max 120max 150max 150max 150max 150max 250max -10 - 0C*1 160max 160max 180max 180max 180max 180max 300max TEMPERATURE REGULATION[mV] 0t o+ 5 0C 50max 50max 90max 120max 150max 240max 480max - 1 0t o+ 5 0C 60max 60max 120max 150max 180max 290max 600max DRIFT[mV] *2 20max 20max 36max 48max 60max 96max 192max START-UP TIME[ms] 200typ(ACIN 100V, Io=100%) *Start-up time is 700ms typ for less than 1minute of applying input again from turning off the input voltage. HOLD-UP TIME[ms] 20typ (ACIN 100V, Io=100%) PROTECTION CIRCUIT AND OTHERS OVERCURRENT PROTECTION Works over 105% of rated current and recovers automatically OPERATING INDICATION LED (Green) REMOTE ON/OFF None ISOLATION INPUT-OUTPUT AC3,000V 1minute, Cutoff current = 10mA , DC500V 50MWmin (At Room Temperature) INPUT-FG AC2,000V 1minute, Cutoff current = 10mA , DC500V 50MWmin (At Room Temperature) OUTPUT-FG AC500V 1minute, Cutoff current = 25mA , DC500V 50MWmin (At Room Temperature) ENVIRONMENT OPERATING TEMP.,HUMID.AND ALTITUDE -10 to +71C(Required Derating), 20 - 90%RH (Non condensing) 3,000m (10,000feet) max STORAGE TEMP.,HUMID.AND ALTITUDE -20 to +75C, 20 - 90%RH (Non condensing) 3,000m (10,000feet) max VIBRATION 10 - 55Hz, 19.6m/s2 (2G), 3minutes period, 60minutes each along X , Y and Z axis IMPACT 196.1m/s2 (20G), 11ms, once each X, Y and Z axis SAFETY AND NOISE REGULATIONS AGENCY APPROVALS (At only AC input) UL60950-1, C-UL(CSA60950-1), EN60950-1, EN50178 Complies with DEN-AN CONDUCTED NOISE Complies with FCC Part15 classB , VCCI-B, CISPR22-B, EN55011-B, EN55022-B CE MARKING Low Voltage Directive, EMC Directive HARMONIC ATTENUATOR Complies with IEC61000-3-2 (Not built-in to active filter *4) OTHERS CASE SIZE/WEIGHT 31X78X103mm (without terminal block)( WXHXD) / 270g max (without cover) COOLING METHOD Convection *1 Measured by 20MHz oscilloscope or Ripple-Noise meter(equivalent to KEISOKU-GIKEN :RM101). *2 Drift is the change in DC output for an eight hour period after a half-hour warm-up at 25C. *3 Derating is required. *4 When two or more units are used,they may not comply with the harmonic attenuator. Please contact us for details. * Parallel operation with other model is not possible. * Derating is required when operated with cover. * A sound may occur from power supply at peak loading. PBA30F Unit type PB A 30 F - O -O

Ordering information

C :with Coating G :Low leakage current E :Low leakage current and EMI class A T :Vertical terminal block J :Connector type N :with Cover (UL508 is pending for approval) N1 :with DIN rail V :Output voltage setting potentiometer external- ly R 123456 PB A-8 Recommended Noise Filter NAC-06-472 High voltage pulse noise type : NAP series Low leakage current type : NAM series *The Noise Filter is recommended *to connect with several devices. Cover is optional

2.5 Terminal cover FG AC(L) AC(N) Name plate Cover (option) Cover name plate Point A:C102 2-M3 Mounting hole 2-M3 Mounting hole 15.1±1.5 22.6 ±1.5 8.575 ±0.5 40.546±0.5 36.5 16.5±2 11.5 9.5 7.5 70.5 12.2 ±1.5 103 34.5 PBA30F PBW30F ¶ Tolerance : ±1 ¶ Mass : 270g or less (without cover) ¶ PCB Material/thickness : CEM3 / 1.6mm ¶ Chassis material : Electric galvanizing steel board ¶ Dimensions in mm ¶ Mounting torque : 0.6N • m(6.3kgf • cm)max ¶ Screw tightening torque : M3 0.8N • m(8.5kgf • cm)max ¶ Please connect safety ground to the unit in 2-M3 holes. ¶ External size of option T,J,N,N1 and V is different from standard model and refer to 7 Option of instruction manual for details. LED Voltage adjust PB A-9 PBA30F Block diagram 3.15A AC250V AC IN DC OUT FG 85 - 264V NOISE FILTER INVERTERCONTROL CURRENT SENSING RECTIFIER AND FILTER RECTIFIER AND FILTER CONTROL Photocoupler Photocoupler TRANSFORMER INRUSH CURRENT LIMIT FUSE OVER VOLTAGE PROTECTION External view Distribution: RSG Electronic Components GmbH ■ Sprendlinger Landstr. 115 ■ D-63069 Offenbach/Germany Tel. +49 69 984047-0 ■ Fax +49 69 984047-77 ■ info@rsg-electronic.de ■ www.rsg-electronic.de Änderungen vorbehalten / subject to change without notice