PBA300F TOTAL-POWER | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 1

Technical content

Ordering information

R 1Series name

2 Output wattage

3 Universal input

4 Output voltage

5 Optional

C :with Coating G :Low leakage current U :Operation stop voltage is set at a lower value F3 :Reverse air exhaust type F4 :Low speed fan Refer to instruction manual 7.1 MODEL PBA300F-3R3 PBA300F-5 PBA300F-7R5 PBA300F-12 PBA300F-15 PBA300F-24 PBA300F-36 PBA300F-48 MAX OUTPUT WATTAGE[W] 198 300 300 324 330 336 324 336 ACIN 100V 3.3V 60A 5V 60A 7.5V 40A 12V 27A 15V 22A 24V 14A 36V 9A 48V 7ADC OUTPUT SPECIFICATIONS ACIN 200V *3 3.3V 60A 5V 60A 7.5V 40A 12V 27A 15V 22A 24V 14(16.5)A 36V 9A 48V 7A INPUT MODEL PBA300F-3R3 PBA300F-5 PBA300F-7R5 PBA300F-12 PBA300F-15 PBA300F-24 PBA300F-36 PBA300F-48 VOLTAGE[V] AC85 - 264 1f or DC120 - 350 (AC50 or DC70 optionally available *4) CURRENT[A] ACIN 100V 3typ 4.1typ ACIN 200V 1.6typ 2typ FREQUENCY[Hz] 50/60 (47 - 63) EFFICIENCY[%] ACIN 100V 68typ 74typ 76typ 78typ 78typ 79typ 81typ 79typ ACIN 200V 71typ 77typ 79typ 81typ 81typ 82typ 84typ 82typ ACIN 100V 0.98typ (Io=100%) POWER FACTOR ACIN 200V 0.95typ (Io=100%) ACIN 100V 20/40typ (Io=100%) (Primary inrush current /Secondary inrush current) (More then 3 sec. to re-start) OUTPUT INRUSH CURRENT[A] ACIN 200V 40/40typ (Io=100%) (Primary inrush current /Secondary inrush current) (More then 3 sec. to re-start) LEAKAGE CURRENT[mA] 0.45/0.75max (ACIN 100V/240V 60Hz, Io=100%, According to IEC60950-1) VOLTAGE[V] 3.3 5 7.5 12 15 24 36 48 CURRENT[A] ACIN 100V 60 60 40 27 22 14 9 7 ACIN 200V *3 60 60 40 27 22 14(16.5) 9 7 LINE REGULATION[mV] 20max 20max 36max 48max 60max 96max 144max 192max LOAD REGULATION[mV] 40max 40max 60max 100max 120max 150max 150max 300max RIPPLE[mVp-p] 0t o+ 5 0C *1 80max 80max 120max 120max 120max 120max 150max 150max -20 - 0C *1 140max 140max 160max 160max 160max 160max 160max 400max RIPPLE NOISE[mVp-p] 0t o+ 5 0C *1 120max 120max 150max 150max 150max 150max 200max 200max -20 - 0C *1 160max 160max 180max 180max 180max 180max 240max 500max 0t o+ 5 0C *1 40max 50max 75max 120max 150max 240max 360max 480max TEMPERATURE REGULATION[mV] -20 to +50C *1 60max 75max 120max 180max 180max 290max 440max 600max DRIFT[mV] *2 12max 20max 30max 48max 60max 96max 144max 192max START -UP TIME[ms] 300typ(ACIN 100/200V, Io=100%) Start-up time is 500ms typ for less than 1minute of applying input again from turning off the input voltage. HOLD-UP TIME[ms] 20typ (ACIN 100/200V, Io=100%) OVERCURRENT PROTECTION Works over 105% of rated current or 101% of peak current and recovers automatically CIRCUIT AND OPERATING INDICATION LED (Green) OTHERS ISOLATION REMOTE SENSING Provided REMOTE ON/OFF Provided INPUT -OUTPUT -RC AC3,000V 1minute, Cutoff current = 10mA, DC500V 50MWmin (At Room T emperature) INPUT -FG AC2,000V 1minute, Cutoff current = 10mA, DC500V 50MWmin (At Room T emperature) OUTPUT-RC-AUX-FG AC500V 1minute, Cutoff current = 100mA, DC500V 50MWmin (At Room T emperature) OUTPUT-RC -AUX AC100V 1minute, Cutoff current = 100mA, DC100V 50MWmin (At Room Temperature) OPERATING TEMP .,HUMID.AND ALTITUDE -20 to +71C, 20 - 90%RH (Non condensing) 3,000m (10,000feet) max ENVIRONMENT STORAGE TEMP.,HUMID.AND ALTITUDE -20 to +75C, 20 - 90%RH (Non condensing) 3,000m (10,000feet) max VIBRATION 19.6m/s2 (2G), 10 - 55Hz, 3minutes period, 60minutes each along X, Y and Z axis IMPACT 196.1m/s2 (20G), 11ms, once each X, Y and Z axis AGENCY APPROVALS UL60950-1, C-UL(CSA60950-1), EN60950-1, EN50178 Complies with DEN-AN (At only AC input) SAFETY AND CONDUCTED NOISE Complies with FCC Part15 classB, VCCI-B, CISPR22-B, EN55011-B, EN55022-B NOISE REGULATIONS CE MARKING Low Voltage Directive, EMC Directive HARMONIC ATTENUATOR Complies with IEC61000-3-2 CASE SIZE/WEIGHT 102X42X170mm (without terminal block and screw) (WXHXD) /1.0kg max OTHERS COOLING METHOD Forced cooling (internal fan) *1 Measured by 20MHz oscilloscope or Ripple-Noise meter(equivalent to KEISOKU-GIKEN : RM101). *2 Drift is the change in DC output for an eight hour period after a half-hour warm-up at 25C. *3 () means peak current. Peak loading for 10s. And Duty 35% max, refer to Instruction manual in detail. *4 Derating is required.Consult us for details. * A sound may occur from power supply at pulse loading.