PBA15F RSG | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

MODEL PBA15F-3R3 PBA15F-5 PBA15F-9 PBA15F-12 PBA15F-15 PBA15F-24 PBA15F-48 SPECIFICATIONS MODEL PBA15F-3R3 PBA15F-5 PBA15F-9 PBA15F-12 PBA15F-15 PBA15F-24 PBA15F-48 INPUT VOLTAGE[V] AC85 - 264 1 for DC110 - 370 (AC50 or DC70 Please refer to the instruction manual 2.1 Input voltage *3) CURRENT[A] ACIN 100V 0.30typ (Io=100%) 0.4typ (Io=100%) ACIN 200V 0.15typ (Io=100%) 0.2typ (Io=100%) FREQUENCY[Hz] 50/60 (47 - 440) or DC EFFICIENCY[%] ACIN 100V 68typ 74typ 75typ 75typ 77typ 75typ 75typ ACIN 200V 68typ 75typ 77typ 78typ 80typ 78typ 78typ INRUSH CURRENT[A] ACIN 100V 15typ (Io=100%)( At cold start ) ACIN 200V 30typ (Io=100%)( At cold start ) LEAKAGE CURRENT[mA] 0.15/0.30max (ACIN 100V/240V 60Hz, Io=100%, According to IEC60950-1,DENAN) OUTPUT VOLTAGE[V] 3.3 5 9 1 21 52 44 8 CURRENT[A] 3 3 1.7 1.3 1 0.7 0.35 LINE REGULATION[mV] 20max 20max 36max 48max 60max 96max 192max LOAD REGULATION[mV] 40max 40max 100max 100max 120max 150max 240max RIPPLE[mVp-p] 0t o+ 5 0C*1 80max 80max 120max 120max 120max 120max 150max -10 - 0C*1 140max 140max 160max 160max 160max 160max 200max RIPPLE NOISE[mVp-p] 0t o+ 5 0C*1 120max 120max 150max 150max 150max 150max 250max -10 - 0C*1 160max 160max 180max 180max 180max 180max 300max TEMPERATURE REGULATION[mV] 0t o+ 5 0C 50max 50max 90max 120max 150max 240max 480max - 1 0t o+ 5 0C 60max 60max 120max 150max 180max 290max 600max DRIFT[mV] *2 20max 20max 36max 48max 60max 96max 192max START-UP TIME[ms] 200typ(ACIN 100V, Io=100%) *Start-up time is 700ms typ for less than 1minute of applying input again from turning off the input voltage. HOLD-UP TIME[ms] 20typ (ACIN 100V, Io=100%) PROTECTION CIRCUIT AND OTHERS OVERCURRENT PROTECTION Works over 105% of rated current and recovers automatically OPERATING INDICATION LED (Green) REMOTE ON/OFF None ISOLATION INPUT-OUTPUT AC3,000V 1minute, Cutoff current = 10mA , DC500V 50MWmin (At Room Temperature) INPUT-FG AC2,000V 1minute, Cutoff current = 10mA , DC500V 50MWmin (At Room Temperature) OUTPUT-FG AC500V 1minute, Cutoff current = 25mA , DC500V 50MWmin (At Room Temperature) ENVIRONMENT OPERATING TEMP.,HUMID.AND ALTITUDE -10 to +71C(Required Derating), 20 - 90%RH (Non condensing) 3,000m (10,000feet) max STORAGE TEMP.,HUMID.AND ALTITUDE -20 to +75C, 20 - 90%RH (Non condensing) 3,000m (10,000feet) max VIBRATION 10 - 55Hz, 19.6m/s2 (2G), 3minutes period, 60minutes each along X , Y and Z axis IMPACT 196.1m/s2 (20G), 11ms, once each X, Y and Z axis SAFETY AND NOISE REGULATIONS AGENCY APPROVALS (At only AC input) UL60950-1, C-UL(CSA60950-1), EN60950-1, EN50178 Complies with DEN-AN CONDUCTED NOISE Complies with FCC Part15 classB , VCCI-B, CISPR22-B, EN55011-B, EN55022-B CE MARKING Low Voltage Directive, EMC Directive HARMONIC ATTENUATOR Complies with IEC61000-3-2 (Not built-in to active filter *4) OTHERS CASE SIZE/WEIGHT 31X78X85mm (without terminal block)( WXHXD) / 200g max (without cover) COOLING METHOD Convection *1 Measured by 20MHz oscilloscope or Ripple-Noise meter(equivalent to KEISOKU-GIKEN :RM101). *2 Drift is the change in DC output for an eight hour period after a half-hour warm-up at 25C. *3 Derating is required. *4 When two or more units are used,they may not comply with the harmonic attenuator. Please contact us for details. * Parallel operation with other model is not possible. * Derating is required when operated with cover. * A sound may occur from power supply at peak loading. PBA15F Unit type PB A 15 F - O -O

Ordering information

C :with Coating G :Low leakage current E :Low leakage current and EMI class A T :Vertical terminal block J :Connector type N :with Cover (UL508 is pending for approval) N1 :with DIN rail V :Output voltage setting potentiometer external- ly R 123456 PB A-6 Recommended Noise Filter NAC-06-472 High voltage pulse noise type : NAP series Low leakage current type : NAM series *The Noise Filter is recommended *to connect with several devices. Cover is optional Distribution: RSG Electronic Components GmbH ■ Sprendlinger Landstr. 115 ■ D-63069 Offenbach/Germany Tel. +49 69 984047-0 ■ Fax +49 69 984047-77 ■ info@rsg-electronic.de ■ www.rsg-electronic.de Änderungen vorbehalten / subject to change without notice

2.5 Point A:C102 Cover (option) Name plate Mounting hole 2-M3 Mounting hole 2-M3 AC(N) AC(L) FG Terminal cover15.1±1.5 34.5 34.5 36.5 11.5 8516.5±2 70.5 12.2±1.5 22.6±1.5 31±0.5 60±0.5 9.5 7.5 PBA15F PBW15F LED Voltage adjust Cover name plate ¶ Tolerance : ±1 ¶ Mass : 200g or less (without cover) ¶ PCB Material/thickness : CEM3 / 1.6mm ¶ Chassis material : Electric galvanizing steel board ¶ Dimensions in mm ¶ Mounting torque : 0.6N • m(6.3kgf • cm)max ¶ Screw tightening torque : M3 0.8N • m(8.5kgf • cm)max ¶ Please connect safety ground to the unit in 2-M3 holes. ¶ External size of option T,J,N,N1 and V is different from standard model and refer to 7 Option of instruction manual for details. PB A-7 PBA15F Block diagram 2.5A AC250V AC IN DC OUT FG 85 - 264V NOISE FILTER INVERTERCONTROL CURRENT SENSING RECTIFIER AND FILTER CONTROL Photocoupler Photocoupler TRANSFORMER INRUSH CURRENT LIMIT FUSE OVER VOLTAGE PROTECTION RECTIFIER AND FILTER External view Distribution: RSG Electronic Components GmbH ■ Sprendlinger Landstr. 115 ■ D-63069 Offenbach/Germany Tel. +49 69 984047-0 ■ Fax +49 69 984047-77 ■ info@rsg-electronic.de ■ www.rsg-electronic.de Änderungen vorbehalten / subject to change without notice