PB131 LUMILEDS | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
PB131 LUXEON Altilon H1K PnP Product Brief ©2017 Lumileds Holding B.V. All rights reserved. LUXEON Altilon H1K PnP Integrated functionality for headlight solutions LUXEON Altilon H1K PnP is a fully integrated solution optimized for headlight applications, meeting both SAE and ECE color specifications. This solution minimizes time to market and simplifies supply chain by reducing optical and mechanical design efforts with electrical connectors. Combined with LUXEON Altilon LEDs, LUXEON Altilon H1K PnP provides the same powerful performance guaranteed by LUXEON LEDs. FEATURES AND BENEFITS PRIMARY APPLICATIONS Easy plug and play design for a reduction in design costs Adaptive Lighting Industry’s lowest thermal resistance enables smaller heatsinks for smaller designs Front Fog Customizable interface, available with connector, flux bin resistor and thermistor Headlight Available in 1x4 and 1x5 configuration IEC-60810 qualified and PPAP documentation available
©2017 Lumileds Holding B.V. All rights reserved. LUXEON is a registered trademark of the Lumileds Holding B.V. in the United States and other countries. lumileds.com Neither Lumileds Holding B.V. nor its affiliates shall be liable for any kind of loss of data or any other damages, direct, indirect or consequential, resulting from the use of the provided information and data. Although Lumileds Holding B.V. and/or its affiliates have attempted to provide the most accurate information and data, the materials and services information and data are provided “as is,” and neither Lumileds Holding B.V. nor its affiliates warrants or guarantees the contents and correctness of the provided information and data. Lumileds Holding B.V. and its affiliates reserve the right to make changes without notice. You as user agree to this disclaimer and user agreement with the download or use of the provided materials, information and data. PB131 LUXEON Altilon H1K PnP Product Brief 20170531 LUXEON Altilon H1K PnP Absolute Ratings. PARAMETER PERFORMANCE Minimum DC Forward Current 100mA Maximum DC Forward Current 1500mA Peak Pulsed Forward Current [3] 2000mA Maximum Transient Peak Current 2000mA for ≤10ms Maximum AC Ripple [2] 50mA rms at ≥10kHs LED Junction Temperature -40 to 150°C Maximum Junction Temperature for Short Time Applications (1500mA) [1] 175°C Maximum Operating Case Temperature at Test Current [1] 130°C Maximum Operating Case Temperature at Maximum Current [1] 130°C LED Storage Temperature 130°C ESD Sensitivity [4] ±8kV HBM, ±400V MM, ±2kV CDM Reverse Voltage (Vreverse) LUXEON LEDs are not designed to be driven in reverse bias Autoclave Conditions 121°C at 2 ATM 100% Relative Humidity for 96 Hours Maximum Notes: 1. Proper current derating must be observed to maintain junction temperature below the maximum allowable. LUXEON Altilon H1K PnP LEDs driven at or above maximum LED case temperature may have a shorter lifetime. 2. Residual periodic variations due to power conversion from alternating current (AC) to direct current (DC), also called “ripple,” are acceptable if the following conditions are met: − The frequency of the ripple current is 100Hz or higher − The average current for each cycle does not exceed the maximum allowable DC forward current − The maximum amplitude of the ripple does not exceed 15% of the maximum allowable DC forward current 3. A 10% duty cycle with pulse width of 10ms. 4. Measured using human body model (per JESD22 A114), machine model (per JESD22 A115) and charged device model (per JESD22 C101). Notes: 1. Drawings are not scale. 2. All dimensions are in millimeters. Mechanical Dimensions. 30.80 0.5 23.50 9.40 2.025 0.05 2.20 7.45 18 0.5 0.5 1.60 0.05 0 (2X) 2.025 0.05 3.20 0.05 0 (2X) A PCB blur <0.2 R1 R2 C1 C2 0.16 A Centre line of die array
0.1 A B
B A 5.7 5.8 0.8 16.6 1.70 2.40 0.1 6.40 0.5 8.2 12.70 4 3.70 B Keep Out area for SMD Keep Out area for connector pin 0.05 max Ra 1.6 16.20