PB112 LUMILEDS | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
PB112 LUXEON F Cool White Product Brief ©2016 Lumileds Holding B.V. All rights reserved. LUXEON F Cool White Industry-leading solutions for light guide DRL, and signature lamps LUXEON F Cool White LEDs are the only automotive LEDs that deliver design flexibility and advanced functionality. These products, with their miniaturized form factor, are designed to support backup/reverse, daytime running lights, and license plate applications. The Lumileds automotive binning structure meets both SAE and ECE color specifications and is hot binned at 85°C, consistent with actual automotive operational environments. LUXEON F Cool White provides an industry-leading solution for your front and rear applications. All LUXEON F LEDs are AEC-Q101 qualified. FEATURES AND BENEFITS PRIMARY APPLICATIONS Low thermal resistance for better hot lumen performance Backup/Reverse Standard packaging for low cost and ease of manufacturability Daytime Running Lights Hot binned at 85°C monopulse (MP) to match closer to operating conditions License Plate IEC/PAS 62707-1 White LED
©2016 Lumileds Holding B.V. All rights reserved. LUXEON is a registered trademark of the Lumileds Holding B.V. in the United States and other countries. lumileds.com Neither Lumileds Holding B.V. nor its affiliates shall be liable for any kind of loss of data or any other damages, direct, indirect or consequential, resulting from the use of the provided information and data. Although Lumileds Holding B.V. and/or its affiliates have attempted to provide the most accurate information and data, the materials and services information and data are provided “as is,” and neither Lumileds Holding B.V. nor its affiliates warrants or guarantees the contents and correctness of the provided information and data. Lumileds Holding B.V. and its affiliates reserve the right to make changes without notice. You as user agree to this disclaimer and user agreement with the download or use of the provided materials, information and data. PB112 LUXEON F Cool White Product Brief 20161014 LUXEON F Cool White Absolute Ratings. PARAMETER PERFORMANCE Minimum DC Forward Current 50mA Maximum DC Forward Current 1000mA Maximum Junction Temperature [1] 150°C Operating Case Temperature at 700mA [1] -40°C to 130°C Operating Case Temperature at Maximum Current [1] -40°C to 105°C LED Storage Temperature -40°C to 130°C Maximum Soldering Temperature 260°C Allowable Reflow Cycles 3 ESD Sensitivity [2] ±8kV HBM, ±400V MM, ±2kV CDM Reverse Voltage (Vreverse) LUXEON F LEDs are not designed to be driven in reverse bias Autoclave Conditions 121°C at 2 ATM 100% Relative Humidity for 96 Hours Maximum Notes: 1. Proper current derating must be observed to maintain junction temperature below the maximum. LUXEON F LEDs driven at or above maximum LED case temperature may have a shorter lifetime. 2. Measured using human body model (per JESD22 A114), machine model (per JESD22 A115 and charged device model (per JESD22 C101). Notes: 1. Drawings are not scale. 2. All dimensions are in millimeters. Mechanical Dimensions. 1.90 ±0.10 2.30 0.10 TVS ANGULARITY TOLERANCE 2.5 DIE 0.60 0.10 0.68 0.10 1.65 0 0.05 CENTER OF THERMAL PAD TO CENTER OF LUMIRAMIC 0.90 2.05 0.70 0.25 0.125 0.90 0.575 ±0.100 CENTER OF THERMAL PAD TO TOP EDGE 0.95 ±0.10 CENTER OF THERMAL PAD TO SIDE EDGE 0.075 ±0.05 CENTER OF THERMAL PAD TO CENTER OF LUMIRAMIC CATHODEANODE CENTER OF DIE CENTER OF THERMAL PAD LINEAR: ANGULAR: STANDARD TOLERANCES (UNLESS OTHERWISE SPECIFIED)