PATT_V02 VISHAY | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 4
Technical content
www.vishay.com Vishay Dale Thin Film Revision: 14-Mar-2019 1 Document Number: 60124 For technical questions, contact: thinfilm@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Precision Automotive High Temperature (155 °C at Full Rated Power) Thin Film Chip Resistor, AEC-Q200 Qualified The terminations consist of an adhesion layer, a leach resistant nickel barrier and gold plating compatible with high temperature solder systems. CONSTRUCTION
FEATURES
- Resistance range: 1.0 to 1 M
- AEC-Q200 qualified, table 7F
- AEC-Q200 qualified, ESD rated class 1C
- Laser trimmed to any value
- Intrinsic moisture protected resistor element
- Moisture resistant to MIL-STD-202, method 106
- Tantalum nitride resistor film on alumina substrate
- 100 % visual inspected per MIL-PRF-55342
- Laser-trimmed tolerances to ± 0.1 %
- Load life stability 0.2 % at 1000 h at 155 °C and 100 % rated power
- Very low noise and voltage coefficient (< -30 dB, < 0.1 ppm/V)
- Sulfur resistant (per ASTM B809-95 humid vapor test)
- Material categorization: fo r definitions of compliance please see www.vishay.com/doc?99912 TYPICAL PERFORMANCE Note (1) Storage temperature rating is for device only Adhesion Layer High Purity Alumina Substrate Nickel Barrier Gold Passivation T antalum Nitride Resistive Film ABSOLUTE TCR 25 TOL. 0.1 STANDARD ELECTRICAL SPECIFICATIONS TEST SPECIFICATIONS CONDITIONS Material Tantalum nitride - Resistance Range 1.0 to 1 M - TCR: Absolute ± 25 ppm/°C to ± 100 ppm/°C -55 °C to +175 °C Tolerance: Absolute ± 0.1 % to ± 1.0 % +25 °C Stability: Absolute ± 0.2 % 1000 h at 155 °C and 100 % rated power Stability: Ratio Not applicable - Voltage Coefficient Less than 0.1 ppm/V - Working Voltage 75 V - Operating Temperature Range -55 °C to +250 °C - Storage Temperature Range Noise < -30 dB - Shelf Life Stability: Absolute 100 ppm 1 year at 25 °C COMPONENT RATINGS CASE SIZE POWER RATING (mW) WORKIN G VOLTAGE (V) RESISTANCE RANGE ( ) 0402 50 75 1.5 to 51K 0603 150 75 2.75 to 120K 0805 200 100 2.75 to 301K 1206 400 200 1.0 to 1M
www.vishay.com Vishay Dale Thin Film Revision: 14-Mar-2019 2 Document Number: 60124 For technical questions, contact: thinfilm@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 DIMENSIONS in inches CASE SIZE L W T D E ENVIRONMENTAL TESTS ENVIRONMENTAL TEST CONDITIONS TYPICAL VISHAY PERFORMANCE High temperature storage MIL-STD-202 method 108, 1000 h at 125 °C ± 0.05 % Temperature cycling JESD22 method JA-104, 1000 cycles, Moisture resistance MIL-ST D-202 method 106 ± 0.017 % Biased humidity MIL-STD-202 method 103, 1000 h at 85 °C, 85 % RH, 10 % rated power ± 0.133 % Life MIL-STD-202 method 108, 1000 h at 155 °C ± 0.20 % at 100 % rated power and 155 °C. Effective film temperature is 200 °C. Mechanical shock MIL-STD-202 method 213, condition C ± 0.008 % Vibration MIL-STD-202 method 204, 10 Hz to 2 kHz ± 0.008 % Resistance to soldering heat MIL-STD-202 method 210, condition B ± 0.09 % Electrostatic discharge AEC-Q200-002, human body Solderability MIL-STD-883 method 2003 para 2.3.1 and J-STD-002 Pass Die shear MIL-PRF-55342 Pass Flame retardance AEC-Q200-001 para 4.0 Pass MECHANICAL SPECIFICATIONS Resistive element Tantalum nitride Substrate material Alumina Terminations Gold (10 μin. min. ) over nickel (50 μin. min.) DERATING CURVE D L E TW L DT Ambient Temperature °C - 55 02 5 0 100Percent of Rated Power 50 100 200 155
www.vishay.com Vishay Dale Thin Film Revision: 14-Mar-2019 3 Document Number: 60124 For technical questions, contact: thinfilm@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Note (1) Characteristic TCR - (R < 10 ) Note (2) Resistance values from 1.0 to 10 are undergoing PPAP qualification; results are expected to be similar to PPAP qualified 10 to 120 k GLOBAL PART NUMBER INFORMATION New Global Part Numbering: PATT0603E1002BGT1 GLOBAL MODEL CASE SIZE TCR CHARACTERISTIC RESISTANCE TOLERANCE TERMINATION PACKAGING PATT 0402 0603 0805 1206 E = ± 25 ppm/°C H = ± 50 ppm/°C K = ± 100 ppm/°C (1) L = ± 200 ppm/°C The first 3 digits are significant figures and the last digit specifies the number of zeros to follow. “R” designates the decimal point. Example: 10R0 = 10 1000 = 100 1002 = 10 k B = ± 0.1 % D = ± 0.5 % F = ± 1.0 % G = ± 2.0 % J = ± 5.0 % G = wraparound gold over nickel barrier BULK BS = 100 min., 1 mult. WAFFLE WS = 100 min., 1 mult. W0 = 100 min.,100 mult. WI = 100 min.,1 mult. (item single lot date code) WP = 100 min.,1 mult. (package unit single lot date code) TAPE AND REEL T0 = 100 min., 100 mult. T1 = 1000 min., 1000 mult. T3 = 300 min., 300 mult. T5 = 500 min., 500 mult. TF = full reel TS = 100 min., 1 mult. TI = 100 min., 1 mult. (item single lot date code) TP = 100 min., 1 mult. (package unit single lot date code) RESISTANCE TCR (ppm/°C) TOLERANCE (%) 10 to 1 M 25, 50, 100, 200 0.1, 0.5, 1, 2, 5 5 to 10 (2) 100, 200 1, 2, 5 1.0 to 5 (2) 200 1, 2, 5 03E1 02B 00 GT 1TPA 6T
www.vishay.com Vishay Revision: 01-Jan-2019 1 Document Number: 91000 Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA AR E SUBJECT TO CHANGE WITH OUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product , (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all implied warranties, incl uding warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applicatio ns are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular applic ation. It is the customer’s responsibility to validate tha t a particular product with the prope rties described in the product sp ecification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different ap plications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s term s and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay product s not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain writ ten terms and conditions rega rding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is gr anted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2019 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED