PAS6 MULTICOMP | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 6
Technical content
Page <1> V1.016/05/20 PA Series Sub-Miniature Pushbutton Switches Newark.com/multicomp-pro Farnell.com/multicomp-pro Element14.com/multicomp-pro Specifications Max. Current/Voltage Rating with Resistive Load : 400mA 32V AC-100mA 50V DC-125mA 125V AC 500mA 48V AC - 200mA 50V DC - 200mA 250V AC for metal material Initial Contact Resistance : 50mΩ Max. Insulation Resistance : 1GΩ min. @ 500V DC Dielectric Strength : 1,000 VAC rms. 1,500 VAC rms. for metal material Electrical Life at Full Load : 500,000 cycles Operating Temperature : -30°C to 85°C B3 series : 3 ±0.25mm (0.118") Total Travel : 1.5mm(0.059") Operating Force : 2N ~ 5N Contact Bounce : 10ms Mechanical Life : 1,000,000 cycles Torque : 0.5Nm max. applied to nut, 1.5Nm max. for metal material Soldering : 350°C max. for 5 seconds Lead Free Materials Case : Diallyl phthalate (DAP) (UL94V-0) Cap : Polyamide 6/6 Bushing : Polyamide 6/6 Switch Function No. Poles Model No. Switch Function Connected Terminals Pos. 1 Pos. 2 Pos. 1 Pos. 2 Schematic SP PAS6 OFF MOM Open 1-3 SP PAS7 ON OFF(MOM) 1-3 Open MOM = Momentary Bushing Type Dimensions : Inches (Millimetres) For PAS6 & PAS7 Series
Page <2> V1.016/05/20 PA Series Sub-Miniature Pushbutton Switches Newark.com/multicomp-pro Farnell.com/multicomp-pro Element14.com/multicomp-pro Bushing Plating Termination Options Cap Options Dimensions Dimensions : Inches (Millimetres)
Page <3> V1.016/05/20 PA Series Sub-Miniature Pushbutton Switches Newark.com/multicomp-pro Farnell.com/multicomp-pro Element14.com/multicomp-pro Hardware Dimensions : Inches (Millimetres)
Page <4> V1.016/05/20 PA Series Sub-Miniature Pushbutton Switches Newark.com/multicomp-pro Farnell.com/multicomp-pro Element14.com/multicomp-pro Wire L1 Wire length: 500mm Multi-wire lead AWG20, section 0.6mm², UL approved. (Black / Green / Red) L2 Wire length: 90mm Multi-wire lead AWG20, section 0.6mm², UL approved. (Black / Green / Red) L3 Wire length: 100mm Multi-wire lead AWG20, section 0.6mm², UL approved. (Black / Green / Red) Rubber - Hood Soldering Processes Transparent cap DimensionsBlack cap Dimensions : Inches (Millimetres) Manual Soldering : Use soldering iron of 30 watt, controlled at 350°C ap- proximately 5 seconds while applying solder. Wave Soldering Recommended Soldering Temperature : 260 ±5°C Duration of Solder Immersion : Max 5 sec. (PCB is 1.6mm in thickness)
Page <5> V1.016/05/20 PA Series Sub-Miniature Pushbutton Switches Newark.com/multicomp-pro Farnell.com/multicomp-pro Element14.com/multicomp-pro Wire Multi-wire lead AWG20, section 0.6mm², UL approved. (Black / Green / Red) Dimensions : Inches (Millimetres) For PAL6 Series Specifications Max. Current/Voltage Rating with Resistive Load : 100mA 24V DC-life expectancy 200,000 cycles 2A 125V AC life expectancy 10,000 cycles Initial Contact Resistance : 50mΩ Max. Insulation Resistance : 1GΩ min. @ 500V DC Dielectric Strength : 1,000 V ACrms Electrical Life at Full Load : 200,000 cycles Operating Temperature : -30°C to 85°C Total Travel : 2.5mm(0.098") Operating Force : 2N ~ 5N Contact Bounce : 10ms Mechanical Life : 1,000,000 cycles Torque : 0.5Nm max. applied to nut Soldering : 350°C max. for 5 seconds Lead Free Switch Function Model No. Switch Function Pos. 1 Pos. 2 PAL6 OFF ON Term. COMM. OPEN 1-3 Schematic Dimensions Additional Hardware 1. M12 × 0.75 Nuts 2. Locking Washer 3. O-Ring L = Wire length Code: L1 = 500mm Code: L2 = 90mm Code: L3 = 100mm
Page <6> V1.016/05/20 PA Series Sub-Miniature Pushbutton Switches Newark.com/multicomp-pro Farnell.com/multicomp-pro Element14.com/multicomp-pro Part Number Explanation Important Notice : This data sheet and its contents (the “Information”) belong to the members of the AVNET group of companies (the “Group”) or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group’s liability for death or personal injury resulting from its negligence. Multicomp Pro is the registered trademark of Premier Farnell Limited 2019.