PAS395 PULS | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 14
Technical content
Charger for EDLC Capacitors (Ultra-Caps) PAS395 Revision: 3.1 Specification Prepared: Michael Raspotnig, PULS GmbH 2013/01/19 Content: 1 Functional Description 2 2 Typical Wiring Scheme 3 3 Functional Diagram 3 4 Performance Description 4 5 General Data 6 6 Charging Performance 6 7 Signals, LEDs 7 8 LEDs and Relay Contacts Pattern 8 9 Environment 8 10 Dielectric Strength, Isolation, Leakage Current 9 11 EMC 10 12 Protection Features 11 13 Mechanical Dimensions 12 14 Terminals and Wiring 13 15 Cooling 14 16 Approvals 14
2 Typical Wiring Scheme
3 Functional Diagram
7 Signals, LEDs
13 Mechanical Dimensions Dimensions: 310 x 158 x 80mm (L x W x H) Weight: approx. 2.3kg
14 Terminals and Wiring Two self-locking plug-connectors (X1, X2) with spring-clamp connection points
15 Cooling The charger has a temperature controlled fan included, which makes the unit suitable for any mounting orientation and also suitable for applications where the heat cannot be transferred through the base plate of the unit. The fan will only run if needed during high temperatures. The fan will also run for 8 seconds after applying sufficient input voltage. This allows to check the function of the fan. Furthermore, the fan will run approximately every three hours for a short time to avoid a stiffness of the fan after long breaks and to extend the life of the fan. 16 Approvals GL (Germanischer Lloyd); planned The CE mark indicates conformance with the: - EMC directive 2004/108/EC, - Low-voltage directive (LVD) 2006/95/EC and - RoHS directive 2011/65/EU.