PAS3225P2R6143

PAS3225P3R3113 TAIYO-YUDEN | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 8

Technical content

Notice for TAIYO YUDEN products Please read this notice before using the TAIYO YUDEN products. REMINDERS ˙ Product information in this catalog is as of October 2012. All of the contents specified herein are subject to change without notice due to technical improvements, etc. Therefore, please check for the latest information carefully be- fore practical application or usage of the Products. Please note that Taiyo Yuden Co., Ltd. shall not be responsible for any defects in products or equipment incorpo- rating such products, which are caused under the conditions other than those specified in this catalog or individual specification. ˙ Please contact Taiyo Yuden Co., Ltd. for further details of product specifications as the individual specification is available. ˙ Please conduct validation and verification of products in actual condition of mounting and operating environment before commercial shipment of the equipment. ˙ All electronic components or functional modules listed in this catalog are developed, designed and intended for use in general electronics equipment.(for AV, office automation, household, office supply, information service, telecommunications, (such as mobile phone or PC) etc.). Before incorporating the components or devices into any equipment in the field such as transportation,( automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network (telephone exchange, base station) etc. which may have direct influence to harm or injure a human body, please contact Taiyo Yuden Co., Ltd. for more detail in advance. Do not incorporate the products into any equipment in fields such as aerospace, aviation, nuclear control, subma- rine system, military, etc. where higher safety and reliability are especially required. In addition, even electronic components or functional modules that are used for the general electronic equipment, if the equipment or the electric circuit require high safety or reliability function or performances, a sufficient reliabil- ity evaluation check for safety shall be performed before commercial shipment and moreover, due consideration to install a protective circuit is strongly recommended at customer's design stage. ˙ The contents of this catalog are applicable to the products which are purchased from our sales offices or distribu- tors (so called ʠTAIYO YUDENʟs official sales channelʡ). It is only applicable to the products purchased from any of TAIYO YUDENʟ s official sales channel. ˙ Please note that Taiyo Yuden Co., Ltd. shall have no responsibility for any controversies or disputes that may oc- cur in connection with a third party's intellectual property rights and other related rights arising from your usage of products in this catalog. Taiyo Yuden Co., Ltd. grants no license for such rights. ˙ Caution for export Certain items in this catalog may require specific procedures for export according to ʠForeign Exchange and For- eign Trade Control Lawʡ of Japan, ʠU.S. Export Administration Regulationsʡ, and other applicable regulations. Should you have any question or inquiry on this matter, please contact our sales staff.

（SUPER CAPACITORS 135 ▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . ■ ORDERING CODE ■ EXTERNAL DIMENSIONS Cell top area ɿ ʢʵʣminus Unit ɿ mm Polarity marking:ʢʴʣ Lot number marking : ʢYear/Month/Consecutive numbersʣ Welding Terminal height ʢ0.28ʣ 2.9 3.2ʶ0.15 2.5ʶ0.15 0.9ʶ0.1 2.2 0.1ʶ0.1 1.0ʶ0.15 1.0ʶ0.15 ■ FEATURES ■ SPECIFICATIONS Part Number PAS3225P 2R6143 PAS3225P 3R3113 1.Operating Temp.Range －30～＋70℃ －20～＋70℃ 2.Max.Usable Voltage（V） 2.6V 3.3V 3.Initial Capacitance(F) Over 0.0105 Over 0.007 4.Initial Capacity(μAh) Over 3.5 Over 3.2 5.Initial Internal Resistance(Ω） Under 300 Under 700 6.Max.Discharge Current（μA) 10 10 7. Temperature Charcteristics Highest temperature Over 60% of Initial Spec Over 60% of Initial Spec Lowest temperature Over 70% of Initial Spec Over 60% of Initial Spec ■ PART NUMBERS Part Number Lead Free Reflowable RoHS Maximum Usable Voltage［V］ Norminal Capacity［μAh］ Norminal Capacitance［F］ Typical Internal Resistance［Ω］ PAS3225P 2R6143 ○ ○ 2.6 5.0 0.014 80 PAS3225P 3R3113 ○ ○ 3.3 4.0 0.011 200 ※１ Capacity is measured from maximum usable voltage to 2.0V ※2 Capacity is measured from maximum usable voltage to 2.0V CERAMIC TYPE POLYACENE CAPACITORS REFLOW ◦ High capacity / High reliability Polyacene Capacitors can store a large number of ions into its amor- phous structure (doping), therefore Polyacene Capacitors has much larger capacitance than conventional electric double layer capacitor. In addition, Polyacene Capacitors is extremely stable material and Polyacene Capacitors shows excellent performance in cycle life and durability to overcharge and overdischarge. ◦ RoHS / WEEE compliance Polyacene Capacitors are RoHS and WEEE compliant products and have no recycling and collection duty that is required in lithium ion battery’s case. ◦ Reflowable with lead-free condition (Refer to Reliability Data for recommendable reflow pattern) ■ APPLICATIONS ◦ Memory and RTC back-up power source used for cellular phone, PDA, digital camera, portable radio and so on. P A S 3 2 2 5 P △ 2 R 6 1 4 3 ❶ ❷ ❸ ❹ ❺ ❷Dimention (mm) 3225 3.2×2.5 ❶Series name PAS Polyacene Capacitors ❺Nominal Capacitance 143 0.014F 113 0.011F ❹Voltage 2R6 2.6V 3R3 3.3V ＊R=Decimal point ❸Shape P△ Chip Type △＝Blank space

（SUPER CAPACITORS 136 ▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . ■ RELIABILITY DATA Items Specifications Test Conditions, Remark PAS3225P 2R6143 PAS3225P 3R3113 1. Operating Temperature range －30℃～＋70℃ －20℃～＋70℃ 2. Max. Usable Voltage 2.6V 3.3V 3. Resistance to Reflow Soldering Heat Capacity/Capacitance : Within initial spec. Appearance : No noticeable abnormality Conduct reflow soldering twice according to the reflow soldering test condition mentioned below. (Conduct the reflow in the condition of the voltage of 0.3V or lower.) 4. Floating Charge Characteristics Capacity/Capacitance : Over 70% of initial spec. Appearance : No noticeable abnormality Apply a max.usage voltage to the capacitor for 500 hours at max. operating temp. and measure the floating charge characteristics after returning to normal temperature and humidity. 5. Charge/Discharge Cycle Characteristics Capacity/Capacitance : Over 80% of initial spec. Appearance : No noticeable abnormality Measure the charge/discharge cycle characteristics after the 10000 cycles of charge/discharge at 25±5 ℃ with the charge/discharge cycle test condition for each part. 6. Thermal Durability Capacity/Capacitance : Over 80% of initial spec. Appearance : No noticeable abnormality Leave the capacitor in an atmosphere of 85℃±2℃ and －30±2℃ consecutively for 96 hours each, and return to normal temperature and humidity. 7. Humidity Durability Capacity/Capacitance : Over 80% of initial spec. Appearance : No noticeable abnormality Temperature : 40±2℃, Humidity : 90～95%RH Leave the capacitor for under the condition for 96hours then return to normal temperature and humidity. 8. Vibration Durability No exterior abnormality observed : initial spec. values retained Apply a sine wave vibration of 1.5mm amplitude at frequency 10~55Hz, for 2hours per each direction (X,Y and Z) , for 6 hours in total. ◦ Reflow Soldering Test Condition ◦ Charge/Discharge Cycle Test Condition PAS3225P 2R6143 PAS3225P 3R3113 Charging/Discharging Resistance (Ω) 300 300 Charging Voltage (V) 2.6 3.3 Charging Time (min.) 4.5 4.5 Discharging Time (min.) 0.5 0.5 Reflow profile with lead free condition Cautions : Do not charge prior to reflow, Set reflow condition within the range provided in "Specifications", which will be published separately. Consult with us about the details.

▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . c_pas_ceramic_pack_e-01 CERAMIC TYPE PAS CAPACITOR ■PACKAGING ① Packaging Specifications Item Quantity per Reel Tape Width Pitch Reel Diameter PAS3225P 2R6143 10000 8. 0±0.3 4.0±0.1 φ330±2 PAS3225P 3R3113 10000 8. 0±0.3 4.0±0.1 φ330±2 Unit：mm ② Taping Dimensions

• Emboss Shape ③ Leader Section/Trailer Section Leader section :Over 400mm(Containing at least 88 vacant pockets of carrier tape sealed with top cover tape) Trailer section :Over 40mm(Over 10 vacant pockets of carrier tape sealed with top cover tape) ④ Reel Size ⑤ Peel Strength 0.1~0.7N under the condition of the figure below.

▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . c_pas_ceramic_reli_e-01 CERAMIC TYPE PAS CAPACITOR ■RELIABILITY DATA 1. Operating Temperature range Specified Value PAS3225P 2R6143 －30℃～＋70℃ PAS3225P 3R3113 －20℃～＋70℃ 2. Max. Usable Voltage Specified Value PAS3225P 2R6143 2.6V PAS3225P 3R3113 3.3V 3. Resistance to Reflow Soldering Heat Specified Value PAS3225P 2R6143 Capacity/Capacitance : Within initial spec. Appearance : No noticeable abnormality PAS3225P 3R3113 Test Methods and Remarks Conduct reflow soldering twice according to the reflow soldering test condition mentioned below. (Conduct the reflow in the condition of the voltage of 0.3V or lower.) Reflow Soldering Test Condition Reflow profile with lead free condition Cautions : Do not charge prior to reflow, Set reflow condition within the range provid ed in "Specifications", which will be pu blished separately. Consult with us about the details. 4. Floating Charge Characteristics Specified Value PAS3225P 2R6143 Capacity/Capacitance : Over 70% of initial spec. Appearance : No noticeable abnormality PAS3225P 3R3113 Test Methods and Remarks Apply a max.usage voltage to the capacitor for 500 hours at max . operating temp. and measure the floating charge characteristi cs after returning to normal temperature and humidity. 5. Charge/Discharge Cycle Characteristics Specified Value PAS3225P 2R6143 Capacity/Capacitance : Over 50% of initial spec. Appearance : No noticeable abnormality PAS3225P 3R3113 Test Methods and Remarks Measure the charge/discharge cycle characteristics after the 10 000 cycles of charge/discharge at 25±5 ℃ with the charge/discha rge cycle test condition for each part. Charge/Discharge Cycle Test Condition Part Number PAS3225P 2R6143 PAS3225P 3R3113 Charging/Discharging Resistance (Ω) 300 300 Charging Voltage (V) 2.6 3.3 Charging Time (min.) 4.5 4.5 Discharging Time (min.) 0.5 0.5

▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . c_pas_ceramic_reli_e-01 6. Thermal Durability Specified Value PAS3225P 2R6143 Capacity/Capacitance : Over 80% of initial spec. Appearance : No noticeable abnormality PAS3225P 3R3113 Test Methods and Remarks Leave the capacitor in an atmosphere of 85℃±2℃ and －30±2℃ conse cutively for 96 hours each, and return to normal temperature and humidity. 7. Humidity Durability Specified Value PAS3225P 2R6143 Capacity/Capacitance Over 80% of initial spec. Appearance No noticeable abnormality PAS3225P 3R3113 Test Methods and Remarks Temperature : 40±2℃, Humidity : 90～95%RH Leave the capacitor for under the condition for 96hours then return to normal temperature and humidity. 8. Vibration Durability Specified Value PAS3225P 2R6143 No exterior abnormality observed :initial spec. values retained PAS3225P 3R3113 Test Methods and Remarks Apply a sine wave vibration of 1.5mm amplitude at frequency 10~55Hz, for 2hours per each direction (X,Y and Z) , for 6 hours in total.

▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . c_pas_ceramic_prec_e-01 CERAMIC TYPE PAS CAPACITOR ■PRECAUTIONS 1. Use under the maximum usable voltage When voltage which exceed the maximum usable voltage is applied, it might cause abnormal current flow, which shorten lifetime, and leakage , and sometimes damages PAS capacitors. 2. Use under maximum operating temperature A capacitor using in over max operating temperature may lead to shorter life, leakage, and electrical damage by increasing internal pressure. 3. Limited lifetime Lifetime of PAS capacitor is greatly affected by surrounding temperature. If the temperature lowered by 10℃, the lifetime will approximately doubled. Design a circuit under consideration of deterioration of electrical ch aracteristics after long time usage, i.e. decrease in capacitan ce and increase in internal resistance. 4. PAS capacitor's electrical characteristics might change depending on the surrounding temperature PAS Capacitor’s electrical characteristics might change depending on the surrounding temperature aside from aged deterioration. Therefore, be sure to confirm the temperature performance before use product. 5. PAS capacitor has polarity PAS capacitor has polarity. Please check the polarity before use. If a reverse voltage is applied, causing damage to the product. 6. Mind high ripple current or rapid charge / discharge In circuit with high ripple current or rapid charge / discharge, the lifetime of PAS capacitors might be shortened by self-heating. 7. Mind voltage drop when back-up When back-up (discharging) starts, voltage will drop because of active current and internal resistance. 8. Series connection In case of using PAS capacitor in series connection, the voltage of each capacitor is not always equal and it may be occurred excessive voltage in a part of capacitor, which may lead to shortening lifetime and breakdown. Take a margin against a rated voltage or add a balancing resistance. 9. Don’t contact with wiring pattern during installing If PAS capacitor contact with wiring pattern, it may causes sho rt-circuit, and if there is wiring pattern underneath of PAS ca pacitor, short circuit would occur by damage of resist. 10. Environment of usage In case PAS capacitor is used in high humidity, alkaline or acid air, it may cause deteriorating of its performance and short circuit by corrosion of outer can or terminal. In addition, used in sudden temperature change or high humidity, it may cause deteriorating of its performance an d electrolyte leak by dew condensation. 11. Don’t apply shock and vibration or pressure PAS capacitor is sensitive to shock. Don’t drop PAS capacitor a nd not apply strong pressure to a body, terminals. Soldering pa rt or terminal might be damaged if applying vibration, shock and stress such as pinch, tip, push and twist after installed. 12. Soldering If next each item is not minded, it may cause deteriorating of its performance, leakage, and shortening lifetime. ・Don’t contact solder iron to a cell body. ・Don’t solder over solder conditions in the soldering test condition sheet. ・Don’t charge/discharge before reflow 13. Mind cleaning condition when cleaning circuit-board after soldering Cleaning may affect PAS capacitor. Consult us about cleaning conditions beforehand. Some cleaning conditions cause detrimental influence. 14. Storage Keep following cautions for storage of PAS capacitor.

• Don’t store in high temperature and high humidity condition a nd a place where receiving direct sunlight. Storing PAS capacitor in the room condition of 10 ºC - 35 ºC and less than 65% relative humidity is recommende d.
• Sudden temperature change or high humidity may cause deterior ating of its characteristics and soldering.
• Don’t store PAS capacitor near water, salt water or oil, and dew condensation, gasified oil or salinity filled place.
• Don’t store PAS capacitor in the hazardous gas (hydrogen sulf ide, sulfurous, chlorine, ammonia, bromine, methyl bromine and etc.) .
• Don’t fumigate by halogen fumigant.
• Don’t store PAS capacitor near acid or alkaline solvent.
• Don’t store PAS capacitor in a place where exposed to ozone, ultraviolet or x-ray.
• Don’t store PAS capacitor in a place where vibration and shoc k might occur.

▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . c_pas_ceramic_prec_e-01 15. Disposal Dispose PAS capacitor in accordance with local and country rules and regulations. 16. Usage This product is developed, designed and intended for use in general electronics equipment (for information service, home electric appliances, audio and visual equipment, RTC & memory back up for consumer product and institutional use). Please consult the manufacturer in advance when the capacitor i s used in devices such as: medical devices; transportation devi ces; industrial devices; aerospace industrial devices; security devices and disaster prevention devices. 17. Other Notice

• Don’t heat or throw PAS capacitor into fire.
• Don’t short circuit.
• Don’t solder directly to a cell body.
• Don’t open a body.
• Don’t deform.