DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

200 capacitor05_e-01 ■ FEATURES ■ ORDERING CODE ■ EXTERNAL DIMENSIONS ■ APPLICATIONS 20ʶ1.0 8ʶ1.0 ʴTreminal ʴ ʵ 26ʶ1.0 33ʶ1.0 0.9ʶ0.1 1.2 3ʶ0.5 3ʶ0.1 Sn plating Terminal detail part t=0.15 Sealing part Polarity print surface t=0.25 t=0.15 ʵTreminal Part Number W L T PAS2126FR2R5504 20.0 26 .0 0. 9 Unit : mm ■ PART NUMBERS ■ SPECIFICATIONS Part Number Maximum Usable Voltage（V） Nominal Capacitance（F） In ternal Resistance （mΩ） PA S2126FR2R5504 2.5 0.5 80 Part Number Operation Temp. Range （℃） Max. Usable Voltage （V） In itial Capactitance （F） In itial Internal Resistance (m Ω） P AS2126FR2R5504 －25～＋60 2.5 0.5±20% 80 ＊ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. ◦ PAS can store a large number of ions into its amorphous structure (doping), therefore PAS capacitor has much larger capacitance than co nventional electric double layer capacitors. ◦ Qu ick-charge w ith ampere measure is possible with its Low internal resistance. ◦ Possible to charge/discharge more than 100,000 times with le ss deterioration caused by charging/discharging compared to se condary battery which involves chemical reaction, and that enables to more than 100,000 times charge/discharge and large excellence of du rability for over charge/discharge. ◦ PA S capacitor is environmentally friendly power source, which does no t contain any heavy metals such as Cd,Hg and Pb. oHS compliant) ◦ Ba ck-up power source for CPU, microcomputer, and flash memory writing when shutting off the power. ◦ Load change leveling (life lengthening of main power source such as dr y battery, Lithium primary battery) ◦ Po wer source storage combined with solar cell, fuel cell, generator, an d so on. ◦ Ma in power source for small devices easuring eq uipments, toys and so on). ◦ Peak Ccurrent Assist for LED Flash. THIN FILM TYPE PAS CAPACITOR ❻Nominal Capacitance 〔F〕 504 0.5F ❸Dimensions/ L [mm] 26 26.0 ❷Dimensions/ W [mm] 21 20.0 ❹Shape FR Thin Film Type ❺Maximum Usable Voltage 〔V〕 5 2.5 ※R=decimal point ❶Type PAS Polyacene Capacitors P A S 2 1 2 6 F R 2 R 5 5 0 4 ❶ ❷ ❸ ❹ ❺ ❻ Manual Soldering ■ ELECTRICAL CH RACTERISTICS ◦Discharging Ch aracteristics ◦Temperature Ch aracteristics ◦Temperature Ch aracteristics 3.0 2.5 2.0 1.5 0 1 0 2 0 3 0 4 0 5 0 120 100 Capacity Retentionʢ%ʣ Temperatureʢˆʣ -40 -20 0 2 0 4 0 6 0 8 0 400 300 200Internal Resistanceʢ%ʣ Temperratureʢˆʣ 100 -40 -20 0 40 60 8020

201capacitor05_e-01 ENERGY DEVICES ớSUPER CAPACITORS Ờ ＊ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.

cap05_reli-PRP1 cap05_reli_e-01 ■ RELIABILITY DATA Items Specifications Test Conditions, Remark 1. O perating Temperature range －25～ ＋60℃ 2. Max. Usable Voltage 2. 5V 3. Floating Charge Characteristics Ca pacitance（F）： 0 .28～ 0.6 Internal Resistance（mΩ ） ： Under 120 Appearance ：No le akage/Thickness within 1.1mm Apply the max. Usable voltage to the capacitors for 500hours at max. operating te mp. and measure the floating charge characteristics after returning to normal te mperature a n d humidity. 4. Charge/Discharge Cycle C haracteristics Capacitance（F） ：0. 28～0.6 Internal R esistance（mΩ） ： Under 120 Appearance ：No le akage/Thickness within 1.1mm Temperature：25±5℃ Charge/Discharge Cy cle：10,000times Cycle Condition Ch arge：2.5V-5sec M AX 1A Discharge：c1A ( Cutoff 1.5V) 5. Thermal Durability Ca pacitance（F）： 0 .4～ 0.6 Internal Resistance（mΩ ） ：Under 96 Appearance ：No l eakage/Thickness within 1.1mm Leave in the atmosphere of 60 ±2℃ and －25℃±2℃ for 96 hours each and re - turn to normal temp. and pressure. 6. H umidity Durability Ca pacitance（F）： 0 .4～ 0.6 Internal Resistance（mΩ ） ： Under 96 Appearance ：No l eakage/Thickness within 1mm Leave in the atmosphere of temp. 40 ±2 ℃ humidity 90 ～95 ％RH for 500h and return to normal temperature. 7. S older Heat Resistance Ca pacitance : Within 0.4～0.6F Internal Resistance : Within 2 times of initial spec. Ap pearance : No leakage/Thickness within 1.1mm Manual Soldering : Heating condition : After 380 ℃ ×1 0sec×2times, return to normal temp. and pressure. ■ PRECAUTIONS 1. Use under the maximum usable voltage. When voltage which exceed the maximum usable voltage is applied, it might ca use abnormal current flow, which shorten lifetime, and leakage , and sometimes da mages PAS capacitors. Use under maximum operating temperature. A capacitor using in over max operating temperature may lead to shorter life, leak - age, and electrical damage by increasing internal pressure. 3. Limited life time. L ifetime of P AS capacitor is greatly affected by surrounding temperature. 10 ℃ drop in temperature extends its expected lifetime approximately twice as much. D esign a circuit under consideration of deterioration of electrical characteristics af ter long time usage, decreasing in capacitance and increasing in internal resis - ta nce. 4. PAS capacitor's electrical characteristics might change depending on the sur - ro unding temperature. P AS Capacitor ’s el ectrical characteristics might change depending on the sur - rounding temperature aside from aged deterioration. T herefore, b e s ure to confirm the temperature performance before use product. 5. PAS capacitor has polarity. P AS capacitor has polarity. Please check the polarity before use. I f a reverse voltage is applied, causing damage to the product. Mind voltage drop when back-up. W hen back-up (discharging) starts, voltage will drop because of active current and in ternal resistance. Environment of usage . I n case PAS capacitor is used in high humidity, alkaline or acid air, it may cause de teriorating o f i ts performance and short circuit by corrosion of outer can or lead terminal. In addition, used in sudden temperature change or high humidity, it may ca use deteriorating of its performance and electrolyte leak by dew condensation. Don’t apply shock and vibration or pressure. PAS capacitor is sensitive to shock. Don ’t dr op PAS capacitor and not apply strong pressure to a body, terminals and lead. Soldering part or lead terminal mi ght be damaged if applying vibration, shock and stress such as pinch, tip, push an d twist after installed. Soldering I f next each item is not minded, it may cause deteriorating of its performance, le akage, shortening lifetime. D on’t solder over solder conditions in the spec. sheet. . Cleaning condition when cleaning circuit-board after soldering. C leaning may affect PAS capacitor. Consult us about cleaning conditions beforehand. Som e cleaning conditions cause detrimental influence. . Storage. Ke ep following cautions for storage of PAS capacitor. ◦ Do n’t store in the high temperature, the high humidity condition and a place wh ere receiving direct sunlight. Storing PAS capacitor in the room condition of 10℃ - 35℃ and less than 65% relative humidity is recommended. Sudden tem - perature change or high humidity may cause deteriorating of its characteristics an d Soldering. ◦ Do n’t store PAS capacitor near water, salt water or oil, and it the dew conden - sa tion, gasified oil or salinity filled place. ◦ Do n’t store PAS capacitor in the hazardous gas (hydrogen sulfide, sulfurous, ch lorine , ammonia, bromine, methyl bromine and etc). ◦ Do n’t fumigate by halogen fumigant. ◦ Do n’t store PAS capacitor near acid or alkaline solvent. ◦ Do n’t store PAS capacitor in a place where exposed to ozone, ultraviolet or ray. ◦ Don’t store PAS capacitor in a place where vibration and shock might occur in. ＊ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.