PAC_V02 VISHAY | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 8

Technical content

PAC.. Series www.vishay.com Vishay Draloric Revision: 14-Mar-17 1 Document Number: 28731 For technical questions, contact: ww1resistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Cemented Leaded Wirewound Precision Resistors

FEATURES

  • High power dissipation in small volume
  • Ideal for pulse application
  • TCR ± 100 ppm/K
  • Maximum permissible hot spot temperature is 275 °C
  • Lead (Pb)-free
  • Tolerance 1 %
  • Material categorization: fo r definitions of compliance please see www.vishay.com/doc?99912 The resistor element is a resistive wire which is wound in a single layer on a ce ramic rod. Metal caps are pressed over the ends of the rod. The ends of the resistance wire and the leads are connected to the caps by welding. Tinned copper-clad iron leads with poor heat conductivity are employed permitting the use of relatively short leads to obtain stable mounting without overheating the solder joint. The resistor is coated with a green silicon cement which is not resistant to aggressive fluxes. The coating is non-inflammable, will not drip even at high overloads and is resistant to most commonly used cleaning solvents, in accordance with IEC 60 068-2-45. Notes
  • For Pulse Diagrams see AC.. Series ( www.vishay.com/doc?28730 (1) PAC02 WSZ: P25 °C = 1.8 W (2) Resistance value to be selected for ± 1 % tolerance from E24 and E96 STANDARD ELECTRICAL SPECIFICATIONS MODEL POWER RATING P25 °C W LIMITING VOLTAGE Umax. RESISTANCE RANGE (2) TOLERANCE ± % PAC01 1 0.10 to 2.2K 1 PAC02 (1) 2 0.10 to 3.6K 1 PAC03 3 0.10 to 4.7K 1 PAC04 4 0.10 to 8.2K 1 PAC05 5 0.10 to 12K 1 PAC06 6 0.10 to 12K 1 P x R P x R P x R P x R P x R P x R

PAC.. Series www.vishay.com Vishay Draloric Revision: 14-Mar-17 2 Document Number: 28731 For technical questions, contact: ww1resistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Notes (1) Special winding on request (2) Other dimensions on request (3) See “Part Number and Product Description” (4) See “Packaging Table” PART NUMBER AND PRODUCT DESCRIPTION Part Number: PAC300004701FAC000 MODEL VARIANT TCR/ MATERIAL VALUE TOLERANCE CODE PACKAGING CODE SPECIAL PAC100 = PAC01 PAC200 = PAC02 PAC300 = PAC03 PAC400 = PAC04 PAC500 = PAC05 PAC600 = PAC06 0 = neutral 1 = SWI = Special winding (1) 2 = RT 3 = DK SP 20 mm 4 = DK LP 33 mm (2) 5 = DK LP 17.8 mm (2) 7 = DK LP 25.4 mm (2) 8 = DK SP 25.4 mm 9 = WSZ 6720 C = E/K 25.4 mm (2) Z = value overflow (special) 0 = standard (± 100 ppm/K) 3 digit value 1 digit multiplier MULTIPLIER 7 = *10-3 8 = *10-2 9 = *10-1 0 = *100 1 = *101 2 = *102 3 = *103 4 = *104 5 = *105 F = ± 1.0 % (see Packaging table) The 3 digits are used for all special part styles. To encode the non standard specifications all special parts of one series are listed in a cross reference table. 000 = standard Product Description: PAC03 4K7 1 % AC PAC03 4K7 1 % AC MODEL (3) VALUE (3) TOLERANCE CODE (3) PACKAGING DESCRIPTION (4) PACKAGING TABLE MODEL AMMO LOOSE BLISTER PIECES PACK CODE PACK. DESC. PIECES PACK CODE PACK. DESC. PIECES PACK CODE PACK. DESC. PAC01 1000 A1 A1 PAC01 DK/EK 500 LC LC PAC01RT 2500 AE AE PAC02 500 AC AC PAC02 DK/EK 500 LC LC PAC02 WSZ 1250 BM BM PAC03 500 AC AC PAC03 DK/EK 500 LC LC PAC04 500 AC AC PAC04 DK/EK 500 LC LC PAC05 500 AC AC PAC05 DK/EK 250 LB LB PAC06 500 AC AC PAC06 DK/EK 250 LB LB 3000 470 0AC FAC 01P 00

PAC.. Series www.vishay.com Vishay Draloric Revision: 14-Mar-17 3 Document Number: 28731 For technical questions, contact: ww1resistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Note

  • For packaging dimensions see: www.vishay.com/doc?28721 DIMENSIONS in millimeters [inches] MODEL D max. Lmax. dX max. G WEIGHT g PER UNIT PAC01 4.3 [0.169] 11 [0.433] 0.8 ± 0.03 [0.031 ± 0.001] 2 63 ± 1 [2.480 ± 0.039] 0.52 D L G d x (Lacquer)

PAC.. Series www.vishay.com Vishay Draloric Revision: 14-Mar-17 4 Document Number: 28731 For technical questions, contact: ww1resistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Note (1) See table DIMENSIONS BENDING FORMS TYPE Ø d Ø D max. L h ± 1 P ± 1 S max. PAC01 0.8 (1) (1) 8 17.8 2PAC02 - PAC04 25.4 PAC05 - PAC06 33.0 TYPE Ø D Ø D max. Lh ± 1 P 1 ± 1 P 2 ± 3 S max. Ø B c PAC01 0.8 (1) (1) 8 19.8 17.8 2 1.0 ± 0.1 4.5 ± 1PAC02 - PAC04 22.0 20.0 27.4 25.4 PAC05 - PAC06 35.0 33.0 TYPE Ø D Ø D max. Lh ± 1 P 1 ± 1 P 2 ± 3 S max. Ø B c PAC01 - PAC02 0.8 (1) (1) 8 17.8 17.8 PAC05 - PAC06 33.0 33.0 P h L Ø d Ø D S KINK TYPE S = EK Ø D DOUBLE KINK SP = DK SP S Ø d h c Ø B L Ø D DOUBLE KINK LP = DK LP S Ø d h c Ø B L

PAC.. Series www.vishay.com Vishay Draloric Revision: 14-Mar-17 5 Document Number: 28731 For technical questions, contact: ww1resistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Notes (1) See table DIMENSIONS (2) Test over 10 holes - 9 intervals P0 12.7 x 9 = 114.3 ± 0.5 (3) Parallelism, < 0.5 mm (4) Thickness of carrier tape: 0.55 mm ± 0.1 BENDING FORMS TYPE Ø d Ø D max. ALFHEab l TYPE PAC01 Lead Ø Ø d 0.8 Diameter Ø D (1) Length L (1) Pitch of components P 12.7 ± 1.0 Pitch of spocket holes (2) P0 12.7 ± 0.3 Distance between hole center and resistor center P 1 3.85 ± 0.7 Distance between hole center and lead center P 2 6.35 ± 1.0 Lead spacing F 5.0 + 0.6, - 0.1 Angle of insertion h 1 2 max. Width of carrier tape W 18.0 ± 0.5 Width of adhesive tape W 0 12.0 ± 0.5 Position of holes W 1 9.0 ± 0.5 Position of adhesive tape W 2 0.5 max. Body to hole center H 19.5 ± 1.0 Lead crimp to hole center (3) H0 16.0 ± 0.5 Hole Ø D 0 4.0 ± 0.2 Thickness of tape (4) t 0.9 max. Height for cutting L 1 11 max. Height for insertion H 1 32 max. WSZ Ø D A L E Ø d F H I b a Solder pad dimensions RADIAL TAPED = RT 1 max. Δh1 t Direction of Unreeling F P0 D0 P2 P H H0 W d L Ø D

PAC.. Series www.vishay.com Vishay Draloric Revision: 14-Mar-17 6 Document Number: 28731 For technical questions, contact: ww1resistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 DERATING Maximum dissipation (Pmax.) as a function of the ambient temperature (Tamb) PERFORMANCE TEST PERMISSIBLE CHANGE Climatic category (LCT/UCT/Days) 55/200/56 Climatic Sequence Damp Heat, Steady State, IEC 60115-1, 4.24 Endurance at room temperature (116 % P70), 1000 h, Storage, UCT, IEC 60115-1, 4.25.3 Resistance to Soldering Heat, IEC 60115-1, 4.18 Robustness of Termination, IEC 60115-1, 4.16 Short Time Overload, IEC 60115-1, 4.13 10 x Rated Power for 5 s R = ± (0.2 % R + 0.05 ) 100 50 100 150 200 250 300 AMBIENT TEMPERATURE IN °C 0 25 RATED POWER IN %

PAC.. Series www.vishay.com Vishay Draloric Revision: 14-Mar-17 7 Document Number: 28731 For technical questions, contact: ww1resistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 HISTORICAL 12NC INFORMATION

  • The resistors had a 12-digit ordering code staring with 2306 327
  • The subsequent first digit in dicated the resistor type and packaging.
  • The remaining 4 digits indicated the resistance value: - The first 3 digits indica ted the resistance value. - The last digit indicated the resistance decade in accordance with Resistance Decade table. Resistance Decade Ordering Example The ordering code for an PAC02, resistor value 47  with ± 1 % tolerance, supplied in ammopack of 500 units was:  2306 327 04709. Note (1) Radial parts with tin plated copper leads RESISTANCE DECADE LAST DIGIT 0.10 to 0.976  7 1 to 9.76  8 10 to 97.6  9 100 to 976  1 1 to 9.76 k 2 10 to 12 k 3 HISTORICAL 12NC - Resistor type and packaging TYPE BANDOLIER IN AMMOPACK RADIAL STRAIGHT LEADS 2500 units 500 units 1 000 units

www.vishay.com Vishay Revision: 01-Jan-2019 1 Document Number: 91000 Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA AR E SUBJECT TO CHANGE WITH OUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product , (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all implied warranties, incl uding warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applicatio ns are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular applic ation. It is the customer’s responsibility to validate tha t a particular product with the prope rties described in the product sp ecification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different ap plications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s term s and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay product s not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain writ ten terms and conditions rega rding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is gr anted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2019 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED