PA6605_16 COILCRAFT | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 1
Technical content
+1-847-639-6400 sales@coilcraft.com +44-1236-730595 sales@coilcraft-europe.com +886-2-2264 3646 sales@coilcraft.com.tw +86-21-6218 8074 sales@coilcraft.com.cn + 65-6484 8412 sales@coilcraft.com.sg © Coilcraft Inc. 2016 This product may not be used in medical or high risk applications without prior Coilcraft approval. Specification subject to change without notice. Please check web site for latest information. Planar Transformer Document 1213 Document 1213 Revised 03/03/16 1. Inductance is measured at 250 kHz, 0.1 Vrms. 2. Ipk is the current drawn at minimum input voltage 3. DCR is for each winding 4. Leakage inductance is for the primary, measured at 250 kHz, 0.1 Vrms with secondary winding shorted. 5. Electrical specifications at 25°C. Refer to Doc 362 “Soldering Surface Mount Components” before soldering. Inductance Inductance Leakage at 0 A1 at Ipk2 DCR max3 inductance4 Ipk2 Part number ±10% (µH) min (µH) (mOhms) max (µH) (Adc) Output PA6605-AL 10 9.0 4.7 0.13 12.5 12 V, 5 A
- Designed for Texas Instruments LM5122 Synchronous Flyback Controller with Multiple Phase Capability
- 96% efficiency
- 9.0 – 60 V input; up to12 V, 5 A output
- 1500 Vrms, one minute isolation (hipot) from primary to secondary; 500 Vrms windings to core For TI LM5122 Synchronous Flyback Controller Dimensions are in inches mm Core material Ferrite Terminations Matte tin over nickel over brass. Weight 23.5 g Ambient temperature –40°C to +85°C Storage temperature Component: –40°C to +85°C. Tray packaging: –40°C to +80°C Resistance to soldering heat Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C / 85% relative humidity) Failures in Time (FIT) / Mean Time Between Failures (MTBF) 38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332 Packaging 25 parts per tray PCB washing Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. See Doc787_PCB_Washing.pdf. 1.050 26,67 0.535 13,6 max max 1.181 30,0 0.009 0,229 max 0.006/0,15 Dot indicates pin 1 1.00 25,40 Recommended Land Pattern 0.625 15,875 0.110 2,80 0.095 2,41 PA6605-ALXXXX Y 0.748 ±0.012 19,0 ±0,30 Pri 11: Sec