PA5300.XXXHLT PULSE | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 4
Technical content
Current Rating: Over 66Apk Inductance Range: 120nH to 220nH Height: 15.5mm Max Footprint: 11mm x 10mm Max NOTES: Mechanical Schematic PA5300.XXXHLT 1. Inductance measured at 100kHz, 100mVrms. 2. Inductance at Irated is the value of the inductance at 25°C at the listed rated current. 3. The rated current as listed is either the saturation current (25°C or 100°C) or the heat- ing current depending on which value is lower. 4. The nominal DCR is measured at point 2. , as shown below on the mechanical drawing. 5. The saturation current is the typical current which causes the inductance to drop by 20% at the stated ambient temperatures (25°C, 100°C ). This current is determined by placing the component in the specified ambient environment and applying a short duration pulse current (to eliminate self-heating effects) to the component. 6. The heating current is the DC current which causes the part temperature to increase by approximately 40°C when used in a typical application. 7. In high volt*time applications, additional heating in the component can occur due to core losses in the inductor which may neccessitate derating the current in order to limit the temperature rise of the component. To determine the approximate total losses (or temperature rise) for a given application, the coreloss and temperature rise curves can be used. 8. Parts with the HLT suffix are sold in tape and reel packaging. Pulse complies to industry standard tape and reel specification EIA-481. The tape and reel for this product has a width (W=24mm), pitch (Po=16mm) and depth (Ko=10.5mm). Samples of these parts can be ordered by removing the HLT suffix and replacing with HL. 9. The temperature of the component (ambient plus temperature rise) must be within the stated operating temperature range. Weight: 2.2.74grms Tape & Reel: 150/Reel Dimensions: mm Unless otherwise specified, all tolerances are ± 0.25 PA5300.XXXHL D/C CTRY 3.45 10.70 d 0.10
2 SURFACES
11 MAX
10 MAX
15.5 MAX
(6.5) 7.00 (4.3) (2.6) Electrical Specifications @ 25°C — Operating Temperature - 40°C to +130°C 7 Part Number Inductance1 @ 0ADC (nH +/- 15%) Inductance2 @Irated (nH TYP) Irated3 (ADC) DCR4 (MAX) Saturation Current5 (A TYP) Heating Current6 (A TYP)25°C 100°C PA5300.121HLT 120 114 115 0.10 144 120 115PA5300.221HLT 220 159 80 80 66 SMT Power Inductors Power Beads - PA5300.XXXHLT Series P907.A (04/21) PulseElectronics.com
SURFACE MOUNTING TYPE, REEL/TAPE LIST TYPE REEL SIZE (mm) TAPE SIZE (mm) QTY W ± 0.30 K0 ± 0.1 P1 ± 0.1 ± 0.1 PCS/REEL TAPE & REEL INFO PA5300.XXXHL D/C CTRY W F CIRCULAR HOLES A A SMT Power Inductors Power Beads - PA5300.XXXHLT Series P907.A (04/21) PulseElectronics.com
PA5300.121HLT, L vs I, Curve PA5300.221HLT, L vs I, Curve SMT Power Inductors Power Beads - PA5300.XXXHLT Series P907.A (04/21) PulseElectronics.com
PA5300.XXXHLT Temp Rise vs Power Dissipation PA5300.XXHLT CoreLoss (W) 4 PulseElectronics.com P907.A (04/21) SMT Power Inductors Power Beads - PA5300.XXXHLT Series For More Information: Americas - prodinfo_power@pulseelectronics.com | Europe - power-apps-europe@pulseelectronics.com | Asia - power-apps-asia@pulseelectronics.com Performance warranty of products offered on this data sheet is limited to the parameters specified. Data is subject to change without notice. Other brand and product names mentioned herein may be trademarks or registered trademarks of their respective owners. © Copyright, 2021. Pulse Electronics, Inc. All rights reserved.