PA5187.XXXHLT PULSE | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 3
Technical content
Current Rating: Up to 100Apk Inductance Range: 100nH to 180nH Height: 8.2mm Max Footprint: 10.8mm x 8.2mm Max NOTES: Mechanical Schematic PA5187.XXXHLT 1. Inductance measured at 100kHz, 100mVrms. 2. Inductance at Irated is the value of the inductance at 25°C at the listed rated current. 3. The rated current as listed is either the saturation current (25°C or 100°C) or the heat- ing current depending on which value is lower. 4. The nominal DCR is measured at point 2. , as shown below on the mechanical drawing. 5. The saturation current is the typical current which causes the inductance to drop by 20% at the stated ambient temperatures (25°C, 100°C ). This current is determined by placing the component in the specified ambient environment and applying a short duration pulse current (to eliminate self-heating effects) to the component. 6. The heating current is the DC current which causes the part temperature to increase by approximately 40°C when used in a typical application. 7. In high volt*time applications, additional heating in the component can occur due to core losses in the inductor which may neccessitate derating the current in order to limit the temperature rise of the component. To determine the approximate total losses (or temperature rise) for a given application, the coreloss and temperature rise curves can be used. 8. Parts with the HLT suffix are sold in tape and reel packaging. Pulse complies to industry standard tape and reel specification EIA-481. The tape and reel for this product has a width (W=24mm), pitch (Po=16mm) and depth (Ko=8.7mm). Samples of these parts can be ordered by removing the HLT suffix and replacing with HL. 9. The temperature of the component (ambient plus temperature rise) must be within the stated operating temperature range. Dimensions: mm Unless otherwise specified , all tolerances are ± 0.25 Electrical Specifications @ 25°C — Operating Temperature - 40°C to +130°C 7 Part Number Inductance1 @ 0ADC (nH +/- 10%) Inductance2 @Irated (nH TYP) Irated3 (ADC) DCR4 (mΩ Max) Saturation Current5 (A TYP) Heating Current6 (A TYP)25°C 100°C PA5187.101HLT 100 100 67 0.12 100 84 67PA5187.121HLT 120 120 67 92 78 PA5187.151HLT 150 112 65 75 65 PA5187.181HLT 180 144 48 55 48 P891. A (07/20) SMT Power Inductors Power Beads - PA5187.XXXHLT Series POWER PRODUCTS Power.PulseElectronics.com
P891. A (07/20) SMT Power Inductors Power Beads - PA5187.XXXHLT Series POWER PRODUCTS Power.PulseElectronics.com
PA5187.XXXHLT Temp Rise vs Power Dissipation PA5187.XXXHLT CoreLoss (W) P891. A (07/20) 3 Power.PulseElectronics.com POWER PRODUCTS SMT Power Inductors Power Beads - PA5187.XXXHLT Series