PA5034.XXXHLT PULSE | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 3
Technical content
Current Rating: Over 30Apk Inductance Range: 330nH to 470nH Height: 10.0mm Max Footprint: 10.0mm x 7.0mm Max NOTES: Mechanical Schematic PA5034.XXXHLT 1. Inductance measured at 100kHz, 100mVrms. 2. Inductance at Irated is the value of the inductance at 25°C at the listed rated current. 3. The rated current as listed is either the saturation current (25°C or 100°C) or the heat- ing current depending on which value is lower. 4. The nominal DCR is measured at point 2. , as shown below on the mechanical drawing. 5. The saturation current is the typical current which causes the inductance to drop by 20% at the stated ambient temperatures (25°C, 100°C ). This current is determined by placing the component in the specified ambient environment and applying a short duration pulse current (to eliminate self-heating effects) to the component. 6. The heating current is the DC current which causes the part temperature to increase by approximately 40°C when used in a typical application. 7. In high volt*time applications, additional heating in the component can occur due to core losses in the inductor which may neccessitate derating the current in order to limit the temperature rise of the component. To determine the approximate total losses (or temperature rise) for a given application, the coreloss and temperature rise curves can be used. 8. Parts with the HLT suffix are sold in tape and reel packaging. Pulse complies to industry standard tape and reel specification EIA-481. The tape and reel for this product has a width (W=24mm), pitch (Po=16mm) and depth (Ko=10.5mm). Samples of these parts can be ordered by removing the HLT suffix and replacing with HL. 9. The temperature of the component (ambient plus temperature rise) must be within the stated operating temperature range. Weight: 2.74grms Tape &Reel: 300/ Reel Dimensions: Unless otherwise specified , all tolerances are ± 0.25 SUGGESTED PAD LAYOUT TOLERANCES ±0.05 mm PA5034.XXXHL DC CTRY 3.30 3.90 10.3 (2.2)
10 MAX
7 MAX
(2.6) (4.6) Electrical Specifications @ 25°C — Operating Temperature - 40°C to +130°C 7 Part Number Inductance1 @ 0ADC (nH +/- 15%) Inductance2 @Irated (nH TYP) Irated3 (ADC) DCR4 (mΩ nominal) Saturation Current5 (A TYP) Heating Current6 (A TYP)25°C 100°C PA5034.331HLT 330 231 40 0.4+/- 10% 40 32 47PA5034.471HLT 470 329 30 30 22 SMT Power Inductors Power Beads - PA5034.XXXHLT Series P904.A (04/21) PulseElectronics.com
SURFACE MOUNTING TYPE, REEL/TAPE LIST TYPE REEL SIZE (mm) TAPE SIZE (mm) QTY TAPE & REEL INFO W F P0 P2 K0K1 PA5034.331HLT, L vs I, Curve PA5034.471HLT, L vs I, Curve 140 190 240 290 340 390 440 490 540 Inductance (nH) Current I (A) PA5034.471HL L vs I curve 100 SMT Power Inductors Power Beads - PA5034.XXXHLT Series P904.A (04/21) PulseElectronics.com
PA5034.XXXHLT Temp Rise vs Power Dissipation PA5034.XXXHLT CoreLoss (W) P904.A (04/21) SMT Power Inductors Power Beads - PA5034.XXXHLT Series For More Information: Americas - prodinfo_power@pulseelectronics.com | Europe - power-apps-europe@pulseelectronics.com | Asia - power-apps-asia@pulseelectronics.com Performance warranty of products offered on this data sheet is limited to the parameters specified. Data is subject to change without notice. Other brand and product names mentioned herein may be trademarks or registered trademarks of their respective owners. © Copyright, 2021. Pulse Electronics, Inc. All rights reserved. PulseElectronics.com