DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 6
Technical content
Features
Low On-Resistance: 7.0 Ω typical. V cc Range: 2.7V to 4.2V ±10% Switching Speed 20nS Break-Before-Make Switching Extended Industrial Temperature Range: –40°C to 85°C LoPro™ Packaging (Pb-free): 10-Lead Micro Package Bandwidth 400MHz @ -3dB roll-off. Compatible with 1.8V systems. Power off protection.
Applications
Hand Held Devices Cell Phones PDA’s Notebooks LCD Monitors Set Top Box USB2.0 Applications Pin Definitions Pin No. Name Description OE Switch Enable
3 GND Ground
4,5,6,7 HSD1n, HSD2n. Multiplexed DATA I/O 1,2 D+, D- Common Port / USB DATA
9 V CC Positive Power Supply
10 SEL Switch Select
H X I/O’s = Hi-Z L L D+,D- = HSD1+, HSD1- L H D+,D- = HSD2+,HSD2-.
Description
ProTek Analog’s PA2070 is a bidirectional two-port Hi-speed switch. Configured as a double-pole double throw (DPDT), it is optimized for 400MHz switching. The bandwidth of 400MHz allows passing of the 2rd Harmonic, resulting in minimal edge and phase distortion. Superior channel to channel crosstalk minimizes interference. The PA2070 contains circuitry for Power-Off protection when V CC = 0V. Data pins can tolerate up to 5.5V The PA2070 is compatible with 1.8 and 1.4V Systems. Functional Block Diagram Pin Configuration (Top through View) Temperature Range Package Part Number -40 to 85 °C 10 Lead LoPro PA2070-T7 95222 HSD1+ SEL OE GND HSD2- VCC HSD1- 10 1 2 3 5 6 7 8 HSD2+ Control OE SEL HSD1- HSD1+ HSD2- HSD2+
561 E. Elliot Road #175 Chandler, AZ 85225 Tel: (480) 539-2900. Fax: (480) 632-1715 www.protekanalog.com PA2070 LoPro™ DPDT 400MHz Switch 95222 Rev.0. 06/10 NOT FOR USE IN LIFE SUPPORT SYSTEMS Absolute Maximum Ratings(1) to VCC +0.5V Storage Temperature Range ……………….–65°C to +150°C Notes:- 1. "Absolute Maximum Ratings” may cause permanent damage to th e device. This is a stress only rating and operation of the device at these or any other conditions beyond those indicated in the operational sections of this specification is not implied. 2. The input and output negative voltage ratings may be exceeded if the input and output diode current ratings are observed. 3. Control input must be held HIGH or LOW; it must not float Recommended operating Conditions SYMBOL PARAMETER MIN MAX UNIT VCC Supply Voltage 2.7 4.2 V VCNTRL Control Input Voltage 0 V CC V VSW Switch I/O Voltage -0.5 4.5 V TA Operating Temperature °C TA = 40 °C to +85 °C SYMBOL PARAMETER CONDITIONS V CC (V) MIN TYP MAX UNITS VIK Clamp Diode Voltage I IN = 18mA 3.0 -1.2 V 3.0 to 3.6 1.3 V VIH Input Voltage High 4.2 1.7 V 3.0 to 3.6 0.5 V VIL Input Voltage Low 4.2 0.7 V IIN Control Input Leakage V SW = 0 to VCC 4.2 -1 1 µA IOZ Off State Leakage 0 ≤ Dn, HSD1n, HSD2n ≤ 3.6V 4.2 -2 2 µA IOFF Power Off Leakage Current VSW = 0V to 4.3V, VCC = See Figure 4. 0 -2 2 µA RON Switch On Resistance (1) VSW = 0V to 4.3V, ION = - 8mA See Figure 3. 3.0 7 Ω ∆RON Delta R ON (2) VSW = 0.4V, ION = -8mA 3.0 0.6 Ω ICC Quiescent Supply Current V CNTRL = 0 or VCC, IOUT = 0 4.2 1.0 µA VCNTRL = 2.6V, VCC = 4.3V 4.2 10.0 µA ICCT Increase in ICC per Control Voltage and VCC VCNTRL = 1.8V, VCC = 4.3V 4.2 15.0 µA Notes: 1. Measured by voltage drop between HSDn and Dn pins at the indicated current through the switch. 2. Guaranteed by characterization
561 E. Elliot Road #175 Chandler, AZ 85225 Tel: (480) 539-2900. Fax: (480) 632-1715 www.protekanalog.com PA2070 LoPro™ DPDT 400MHz Switch 95222 Rev.0. 06/10 NOT FOR USE IN LIFE SUPPORT SYSTEMS TA = 40 °C to +85 °C SYMBOL PARAMETER CONDITIONS V CC (V) MIN TYP MAX UNITS tON Turn-On Time S, OE to Output RL = 50Ω, CL = 5pF VSW = 0.8V See Figure 5, Figure 6. 3.0 to 3.6 13 30 nS tOFF Turn-Off Time S, OE to Output RL = 50Ω, CL = 5pF VSW = 0.8V See Figure 5, Figure 6 3.0 to 3.6 12 25 nS tPD Propagation Delay (3) R L = 50Ω, CL = 5pF 3.3 0.25 nS tBBM Break-Before-Make RL = 50Ω, CL = 5pF VSW = 0.8V See Figure 7. 3.0 to 3.6 2.0 6.0 nS OIRR Off Isolation RL = 50Ω, f = 240MHz See Figure 9. 3.0 to 3.6 -30 dB XTALK Non-Adjacent Channel Crosstalk R L = 50Ω, f = 240MHz See Figure 10. 3.0 to 3.6 -45 dB RL = 50Ω, CL = 0pF See Figure 8. 3.0 to 3.6 420 MHz BW -3dB Bandwidth RL = 50Ω, CL = 5pF See Figure 8. 3.0 to 3.6 400 MHz Notes: 3. Guaranteed by characterization USB High Speed Related AC Electrical Characteristics TA = 40 °C to +85 °C SYMBOL PARAMETER CONDITIONS V CC (V) MIN TYP MAX UNITS tSK(P) Skew of Opposite Transitions of the same Output RL = 50Ω, CL = 5pF. 3.0 to 3.6 20 pS tJ Total Jitter (4) RL = 50Ω, CL = 5pF tR=tF=500pS (10 to 90%) at 480Mbps (PRBS=215 - 3.0 to 3.6 200 pS Notes: 4. Guaranteed by characterization Capacitance TA = 40 °C to +85 °C SYMBOL PARAMETER CONDITIONS MIN TYP MAX UNITS CIN Control Pin Input Capacitance VCC = 0V 1.5 CON D+ / D- On Capacitance VCC = 3.3V, OE = 0V, f=240MHz See Figure 12 3.7 COFF D1n, D2n Off Capacitance VCC = 3.3V, OE = 3.3V See Figure 11 2.0 pF
561 E. Elliot Road #175 Chandler, AZ 85225 Tel: (480) 539-2900. Fax: (480) 632-1715 www.protekanalog.com PA2070 LoPro™ DPDT 400MHz Switch 95222 Rev.0. 06/10 NOT FOR USE IN LIFE SUPPORT SYSTEMS Test Diagrams. Fig.3 On Resistance Fig.4 Off Leakage. Fig.5 AC Test Circuit Fig.6 Turn-On / Turn-Off Waveforms Fig.7 Break-Before-Make interval Timing VSW1 VOUT RL CL 50Ω 5pF Logic Input GND SEL HSDn 50% Logic Input VOUT tBBM HSDn Dn HSDn VSW SEL ION GND VON 0V or VCC IDn (OFF) NC VSW SEL GND 0V or VCC A **Each switch port tested separately VIN V OUT RL RL , CL Are functions of the application 50Ω 5pF Logic Input GND SEL HSDn Dn tON tOFF VIH VIL Off Off On 50% 90% 90% Logic Input Switch Output tr < 5nS tf < 5nS CL VSW2 Dn VCC RL , CL Are functions of the application 0.9*VOUT 0.9*VOUT
561 E. Elliot Road #175 Chandler, AZ 85225 Tel: (480) 539-2900. Fax: (480) 632-1715 www.protekanalog.com PA2070 LoPro™ DPDT 400MHz Switch 95222 Rev.0. 06/10 NOT FOR USE IN LIFE SUPPORT SYSTEMS Test Diagrams. Fig.8 Bandwidth Fig.9 Channel Off Isolation Fig.10 Non-Adjacent Channel-to-Channel Crosstalk Fig.11 Channel Off Capacitance. Fig.12 Channel On Capacitance. VCC Network Analyzer GND RS 50Ω Signal Generato r 10nF SEL Dn HSDn RL 50Ω Logic Input 0V or V IH VCC Logic Input 0V or V IH Analyzer CL 5pF RL 50Ω GND Signal Generato r 10nF SEL Dn HSDn RS 50Ω RL , CL Are functions of the application RL , CL Are functions of the application VCC Analyzer CL 5pF RL 50Ω GND 50Ω Signal Generato r 10nF SEL Dn HSDn HSDn 50Ω VCC Logic Input 0V or V IH GND 10nF SEL Dn HSDn Capacitance Meter f = 1MHz VCC Logic Input 0V or VIH GND 10nF SEL Dn HSDn Capacitance Meter f = 1MHz
561 E. Elliot Road #175 Chandler, AZ 85225 Tel: (480) 539-2900. Fax: (480) 632-1715 www.protekanalog.com PA2070 LoPro™ DPDT 400MHz Switch 95222 Rev.0. 06/10 NOT FOR USE IN LIFE SUPPORT SYSTEMS Package Layout and Dimensions Note: Dimensions in millimeters Tape and Reel Specifications Reel Dia A0 B0 K0 D E F W P0 P2 P t-max DIM MIN TYP Max A 1.25 1.30 1.35 B 1.55 1.60 1.65 C 0.50 0.55 0.60 D 0.40 E 0.29 0.30 0.31 F 0.49 0.50 0.51 G 0.80 REF c 0.00 - 0.05 c1 0.10 REF f 0.15 0.20 0.25 g 0.59 0.60 0.61 Side View Bottom View D E F f G g A B Top View Pin 1 Area P2 D P E F W Pin 1 indicated by Dot Top cover tape t
10 Pitches Cumulative
Tolerance on Tape± 0.2 0.70 0.75 1.60 0.40 1.90 0.50 0.25 Recommended Land Pattern C PAD 1 Pin 1 207 207 207