PA2001NLT PULSE | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

P663.F (04/14) pulseelectronics.com SMT Gate Drive Transformers PA200xNL Basic and Operational Insulation Higher Volt-µsec capability Basic insulation (1.4mm creepage/clearance) and operational available Operating frequency: 50kHz and up PA2001NL Mechanical Schematic USA 858 674 8100 Germany 49 7032 7806 0 Singapore 65 6287 8998 Shanghai 86 21 62787060 China 86 755 33966678 Taiwan 886 3 4356768 Electrical Specifications @ 25°C - Operating Temperature -40°C to 130°C Part Number Turns Ratio Pri-Sec Insulation (VRMS) MAX V*µsec Primary Inductance (µH MIN) Leakage Inductance (µH MAX) DCR Primary (Ω MAX) DCR Secondary (Ω MAX) Package Size (L x W x H) (mm MAX) Notes: 1. The maximum volt-µsec limits the peak flux density to 2200 Gauss when used in a unipolar drive application. For bi-polar drive applications, a maximum volt- µsec of two times this rating is acceptable (i.e. 2* (volt*µsec rating) Volt*µsec = (voltage applied to the primary) * dutycycle / Frequency = V * alpha / Freq_ Hz = V * µsec 2. Leakage inductance is measured at primary terminals with all secondaries shorted. 3. Optional Tape & Reel packaging can be ordered by adding a “T” suffix to the part OPERATIONAL INSULATION BASIC INSULATION (1.4MM CREEPAGE AND CLEARANCE BETWEEN PRIMARY AND SECONDARY) 11, 2 number (i.e. PA2002NL becomes PA2002NLT). Pulse complies to industry standard tape and reel specification EIA481. 4. The “NL” suffix indicates an RoHS-compliant part number. 5. The temperature of the component (ambient plus temperature rise) must be within the stated operating temperature range. 3 4 Dimensions: Inches mm .010 0,25 Unless otherwise specified, all tolerances are ± SUGGESTED PAD LAYOUT PA2001NL Date Code Country of Origin .340 8,64 .100 2,54 .098 2,49 .265 6,73 0.07 1,78 0.365 9,27 .200 5,08 .100 2,54 .240 6,1 MAX MAX MAX .005/0,13

4 SURFACES

P663.F (04/14) pulseelectronics.com SMT Gate Drive Transformers PA200xNL Basic and Operational Insulation PA2004NL PA2002NL, PA2007NL, PA2008NL, PA2009NL Mechanicals Schematics PA2004NL Date Code Country of Origin .140 3,56 .140 3,56 .265 6,73 .200 5,08 .100 2,54 .220 5,59 .320 8,13 .070 1,78 MAX MAX .340 8,64 MAX .005/0,13 Dimensions: Dimensions: Inches mm Inches mm .010 0,25 .010 0,25 Unless otherwise specified, all tolerances are ± Unless otherwise specified, all tolerances are ± PAXXXXNL Date Code Country of Origin .355 9.02mm .340 8,64 .100 2,54 .050 1,27 .300 7,62 .100 2,54 .060 1,52 .225 5,71 MAX MAX .300 7,62 MAX 8 765 12 34 .005/0,13

6 SURFACES

PA2002NL / PA2008NL / PA2009NL PA2007NL SUGGESTED PAD LAYOUT SUGGESTED PAD LAYOUT (CONTINUED) 0.07 1,78 .355 9,27 .200 5,08 .100 2,54 .240 6,1

pulseelectronics.com SMT Gate Drive Transformers PA200xNL Basic and Operational Insulation P663.F (04/14) For More Information Pulse Worldwide Headquarters

12220 World Trade Drive

San Diego, CA 92128 U.S.A. Tel: 858 674 8100 Fax: 858 674 8262 Pulse Europe Zeppelinstrasse 15

71083 Herrenberg

Tel: 49 7032 78060 Fax: 49 7032 7806 135 Pulse China Headquarters B402, Shenzhen Academy of Aerospace Technol- ogy Bldg. 10th Kejinan Road High-Tech Zone Nanshan District Shenzen, PR China 518057 Tel: 86 755 33966678 Fax: 86 755 33966700 Pulse North China Room 2704/2705 Super Ocean Finance Ctr.

2067 Yan An Road

Tel: 86 21 62787060 Fax: 86 2162786973 Pulse South Asia

135 Joo Seng Road

#03-02 PM Industrial Bldg. Singapore 368363 Tel: 65 6287 8998 Fax: 65 6287 8998 Pulse North Asia 3F, No. 198 Zhongyuan Road Zhongli City Taoyuan County 32068 Taiwan R. O. C. Tel: 886 3 4356768 Fax: 886 3 4356823 (Pulse) Fax: 886 3 4356820 (FRE) Performance warranty of products offered on this data sheet is limited to the parameters specified. Data is subject to change without notice. Other brand and product names mentioned herein may be trademarks or registered trademarks of their respective owners. © Copyright, 2014. Pulse Electronics, Inc. All rights reserved. PA2005NL, PA2006NL Mechanical Schematic(CONTINUED) PA2005NL PA2006NL Date Code Country of Origin .460 11,68 .250 6,35 .100 2,54 .160 4,06 .025 0,64 .330 8,38 .430 10,92 .070 1,78 .250 6,35 .100 2,54 .005/0,13 .340 8,64 .330 8,38 MAX Dimensions: Inches mm .010 0,25 Unless otherwise specified, all tolerances are ± PA2006NL SUGGESTED PAD LAYOUT PA2005NL