PA1016 MTRONPTI | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

Solid State High Power Amplifier 2.0 – 6.0 GHz, Wide Instantaneous Bandwidth, Built- in protection Broadband Series: PA1016 Copyright © 2014 MtronPTI. All rights reserved. Rev . 20141118 | Page 1 of 3 2525 Shader Road, Orlando FL 32804 Mtronpti.com 407-298-2000

FEATURES

Class AB linear GaN design 2.0 – 6.0 GHz Supports all modulation standards

35 Watt output power

32 Volt operation

Fully protected – load VSWR, input overdrive, over/under supply voltage, overcurrent Available as a module or rack mounted

APPLICATIONS

Public safety or military communication Broadband jamming LTE laboratory test Clear communication. Anywhere. Any time. Software defined radios need broadband power. The need to connect across town or across the battlefield couldn’t be greater. As military and civilian groups move to broadband 4G LTE technology based systems, the need for wideband, linear, efficient power amplifiers grows. MtronPTI’s PA1016 Solid State Power Amp meets that need with 35 Watts of CW power and better than 3.0 dB P-P gain flatness across the band. With 2-tone IMD down at least -30 dBc, the PA1016 by itself or extended with digital predistortion will get the message through. With a wide 2.0 to 6.0 GHz instantaneous bandwidth for complex modulation standards and with built in VSWR protect ion from accidental antenna faults, the PA1016 has 46 dB of gain and comes in a sealed case for high reliability. Designed with an emphasis on SWAP (size, weight and power) reduction, the PA1016 uses a linear GaN design with fast switching for full or half duplex operation. MtronPTI’s line of Solid State Power Amplifiers is backed by a multi-national design and manufacturing team with more than 150 years combined PA design experience. MtronPTI’s con tinuing focus on client service ensures full program life engineering support from specification to production to next generation architecture planning. Like all MtronPTI SSPAs, the PA1016 is available integrated with power supply, cooling and communications interface as a rack mountable unit for laboratory or fixed location applications.

Rev. 20141118 | Page 2 of 3

Electrical Characteristics

Parameter Symbol Min. Typ. Max. Units Comment PASSBAND Operating Frequency Range F CARRIER 2 6 GHz Power Output P OUT_MIN 35 Watts CW (Note: 1) Power Gain 46 dB Power Gain Flatness 3.0 dB P-P Peak to peak across the band Input / Output Return Loss RL IN 10 dB Relative to 50 Ω 2-Tone_Intermodulation (IMD) -30 dBc 37 dBm / To ne, /uni2206 = 1 MHz Harmonics -20 dBc At rated P OUT Non Harmonic Spurious -60 dBc Power Operating Voltage V DD 30 32 V DC Current Consumption I DD 7 A At rated P OUT Max Input Power P IN_MIN +8 dBm Without damage Load VSWR Protection ∞ : 1 Turn On / Off Speed 5 µSec Note 1: Output power over 2.0-2.2 GHz range might be lower than rated. Environmental & Physical Parameter Symbol Min. Typ. Max. Units Comment Operating Case Temperature T OC -20 +75 ° C Storage Temperature T STR -40 +85 ° C Relative Humidity 5 95 % Non-condensing Dimensions 188 x 92 x 27 mm Excluding connectors Weight 825 gr. Max weight RF Connectors IN / OUT SMA Female Cover Flange DC Power / Interface Connector 9-pin D-Sub Cooling External Heat Sink Forced air required D-Sub Connector Pin Assignments

1 FWD OPTION 101 – Forward power detect

2 VVA OPTION 103 – Variable Voltage Attenuator

3 Current Sensor I D @ 50 mV / 100 mA typ. 4 Temperature Sensor V T @ 10 mV / ° C + 500 mV typ.

5 Shutdown TTL

6, 7 VDD 32 V DC 8, 9 GND Ground

Ordering Information

Option Function Description

101 FWD Forward power detect

103 VVA Variable Voltage Attenuator

Copyright © 2014 MtronPTI. All rights reserved. Rev . 20141118 | Page 3 of 3 2525 Shader Road, Orlando FL 32804 Mtronpti.com 407-298-2000 Case Outline

Revision History

Date Rev. Orig. Details of Revision

20141118 A DPD Initial release in 2015 format

Information provided by MtronPTI is believed to be accurate and reliable. However, no responsibility is assumed by MtronPTI for its use nor for any infringements or patents or other rights of third parties that may result from its use. No license is granted by implication or otherwise under any patent or patent rights of MtronPTI. MtronPTI may change specifications without notice to improve end application performance or product manufacturability. Contact MtronPTI for the most up-to-date information.