STP80NF12_07 STMICROELECTRONICS | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 12

Technical content

Datasheet sections

  • 1 Electrical ratings
  • 2 Electrical characteristics
  • 2.1 Electrical characteristics (curves)
  • 3 Test circuit
  • 4 Package mechanical data
  • 5 Revision history

N-channel 120V - 0.013Ω - 80A - TO-220 STripFET™ II Power MOSFET General features ■ Exceptional dv/dt capability ■ 100% avalanche tested ■ Application oriented characterization

Description

This MOSFET series realized with STMicroelectronics unique STripFET process has specifically been designed to minimize input capacitance and gate charge. It is therefore suitable as primary switch in advanced high- efficiency, high-frequency isolated DC-DC converters for Telecom and Computer applications. It is also intended for any applications with low gate drive requirements.

Applications

■ Switching application Internal schematic diagram Type VDSS (@Tjmax) RDS(on) ID STP80NF12 120V <0.018 Ω 80A (1) TO-220 Order codes Part number Marking Package Packaging STP80NF12 P80NF12 TO-220 Tube

1 Electrical ratings

Table 1. Absolute maximum ratings

  1. Limited only by maximu m temperature allowed
  2. Pulse width limited by safe operating area

Table 2. Thermal data

2 Electrical characteristics

Table 3. On/off states Table 4. Dynamic

  1. Pulsed: pulse duration=300µs, duty cycle 1.5%

Table 5. Switching times

Table 6. Source drain diode

  1. Pulse width limited by safe operating area
  2. Pulsed: pulse duration=300µs, duty cycle 1.5%

2.1 Electrical characteri stics (curves)

Figure 1. Safe operating area Figure 2. Thermal impedance Figure 3. Output characteristics Figure 4. Transfer characteristics Figure 5. Transconductance Figure 6. Static drain-source on resistance

3 Test circuit

Figure 13. Switching times test circuit for Figure 14. Gate charge test circuit Figure 15. Test circuit for inductive load Figure 16. Unclamped Inductive load test Figure 17. Unclamped inductive waveform

4 Package mechanical data

In order to meet environmental requirements, ST offers these devices in ECOPACK® packages. These packages have a Lead-free second level interconnect. The category of second level interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an ST trademark. ECOPACK specifications are available at: www.st.com

DIM. mm. inch A 4.40 4.60 0.173 0.181 b 0.61 0.88 0.024 0.034 b1 1.15 1.70 0.045 0.066 c 0.49 0.70 0.019 0.027 D 15.25 15.75 0.60 0.620 E 10 10.40 0.393 0.409 e 2.40 2.70 0.094 0.106 e1 4.95 5.15 0.194 0.202 F 1.23 1.32 0.048 0.052 H1 6.20 6.60 0.244 0.256 J1 2.40 2.72 0.094 0.107 L 13 14 0.511 0.551 L1 3.50 3.93 0.137 0.154 L20 16.40 0.645 L30 28.90 1.137 øP 3.75 3.85 0.147 0.151 Q 2.65 2.95 0.104 0.116 TO-220 MECHANICAL DATA

5 Revision history

Table 7. Revision history 31-Jan-2007 4 Typo mistake on Table 1.