P7500 ETAL | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 4
Technical content
ETALDOC 845/2 Page 1 of 4 July 2005 PRODUCT DATA SHEET COMMON MODE CHOKE P7500 Family Features Applications ∗ Small size ∗ Noise suppression ∗ Wideband suppression ∗ Common mode suppression ∗ Low profile (<2.0mm) ∗ USB lines ∗ Surface Mount ∗ IEEE 1394 ∗ Flat top for pick & place ∗ Lead-free (Pb-free)
DESCRIPTION
The P7500 family is suitable for Common Mode suppression across a broad range of signal applications. Good Common Mode performance is achieved to beyond 500MHz. All chokes will handle DC currents of 300mA minimum. Components are available in two mechanical sizes similar to EIA 0805 and 1206. The P7500 family of components provides reliable lead-free terminations suitable for lead-free and conventional placement and reflow. P 7500-2012 P 7500-3216
ETALDOC 845/2 Page 2 of 4 July 2005 SPECIFICATIONS Electrical 2012 size (EIA 0805) Part Number Common mode Impedance at 100MHz (Ω)(1) DCR (Ω) Max Rated Current(2) IDC (mA) P7500-2012-900MT 90±25% 0.30 400 P7500-2012-161MT 160±25% 0.35 350 P7500-2012-221MT 220±25% 0.40 300 3216 size (EIA 1206) Part Number Common mode Impedance at 100MHz (Ω)(1) DCR (Ω) Max Rated Current(2) IDC (mA) P7500-3216-900MT 90±25% 0.30 400 P7500-3216-161MT 160±25% 0.35 350 P7500-3216-221MT 220±25% 0.40 300 Notes 2. Rated current, I DC, is the current at which the temperature rise is 40ºC (max). 3. Operating temperature -40ºC to +85ºC. 4. For non-standard inductance values, please contact Profec. Voltage ratings (all variants) Rated voltage 50VDC Withstand Voltage 125VDC Insulation resistance 10M Ω (min)
ETALDOC 845/2 Page 3 of 4 July 2005 900 900 161 161 221 221 Fi g . 1 P 7500-2012 impedance vs frequency characteristics IM PEDANC E (O h m ) FREQ UENC Y (MHz) 0.1 1.0 10.0 100.0 1000.0 1 10 100 1000 10000 NORMAL MODE IM PEDANC E COMMON MODE IM PEDANC E 900 900 161 161 221 221 Fi g . 2 P 7500-3216 impedance vs frequency characteristics IM PEDANC E (O h m ) FREQ UENC Y (MHz) 0.1 1.0 10.0 100.0 1000.0 1 10 100 1000 10000 NORMAL MODE IM PEDANC E COMMON MODE IM PEDANC E
ETALDOC 845/2 Page 4 of 4 July 2005 CONSTRUCTION Dimensions shown are in millimetres Terminal plating JESD97 Category = e3. Recommended reflow solder profile: 2 minutes @ 150-200ºC, 10 seconds @ 260ºC; time above 217ºC 60 seconds maximum. Note: these parts are ceramic bodied: avoid PCB flexure after mounting. ORDERING CODE ABSOLUTE MAXIMUM RATINGS Storage temperature -40ºC to +105ºC Operating temperature -40ºC to +85ºC Soldering temperature peak Reflow Hand 260ºC 10s 260ºC 3s P7500--MT Tape and Reel Tolerance (±25%) Impedance code (900, 161 or 221) Size (2012 or 3216) Type code Handle in accordance with IPC/JEDEC J-STD-033 procedure for components classified as IPC/JEDEC J-STD-020 Moisture Sensitivity Level 2. ETAL Group Oy, Kuormatie 14, FIN-03101, Nummela Telephone: +358 (0)20 7500 330 Fax: +358 (0)20 7500 333 Website: www.etalgroup.com Email: etalgroup@egruppen.com FM 25326 ISO 9001 2.0± 0.2 1.2 ±0 . 2 1.2 ±0 . 2 1.10.75 0.4 0.45 0.4 typ 0.45 typ PC B PATTERN Fi g . 3 P 7500-2012 dimensions 3.2± 0.2 typ 0.6 typ 1.61.05 0.6 0.4 PC B PATTERN Fi g . 4 P 7500-3216 dimensions