P6SMBJ6V8 LITTELFUSE | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 5
Technical content
272 www.littelfuse.com 600W Surface Mount Transient Voltage Suppressors Protect sensitive electronics against voltage transients induced by inductive load switching and lightning. Ideal for the protection of I/O interfaces, Vcc bus and other integrated circuits.
FEATURES
- Stand-off voltage range 5.5 to 185 Volts
- Uni-directional and Bi-directional
- Glass passivated junction
- Jedec package designed to meet SM assembly needs
- Low lead inductance
- 100% surge tested
- UL recognised MAXIMUM RATING
- Peak Pulse Power (Ppk) 600 Watts (10 x 1000µs)@25 °C (see diagram on page 3 for wave form)
- 1.5 watt steady state
- Response time: 1 x 10-12 secs (theoretical)
- Forward surge rating: 100A, 8.3 ms single half sine-wave (uni-directional only)
- Operating & storage temp.: -55°C to +150°C MECHANICAL CHARACTERISTICS
- Case: DO-214AA moulded plastic over glass passivated junction UL94V(O) (Thermoset) Epoxy
- Terminals: Solder plated solderable per MIL-STD-750 Method 2026
- Solderable leads: 230°C for 10 seconds.
- Marking: cathode band (positive terminal, uni-directional devices only), device code, logo
- Weight: 0.093 gram (approx). Agency Approvals: Recognized under the Components Program of Underwriters Laboratories. Agency File Number: E128662
ORDERING INFORMATION
2.16 2.26 2.74 2.16 Solder Pads All dimensions in mm P6SMBJ C A Voltage Bi-Directional 5% Voltage Tolerance P6SMBJ Series
274 www.littelfuse.com Part Device Reverse Breakdown Maximum Maximum Maximum Maximum Number Code Standoff Voltage Reverse Clamping Peak Pulse Forward Uni-polar Voltage V BR (Volts) @ IT Leakage Voltage Current Voltage VR IR @ VR VC @ IPP IPP @ VC (VF) @ IT (Volts) Min Max (mA) (µA) (Volts) (A) (Volts) Notes: 1. BV is measured using a pulse of 20 milliseconds or less. 2. VF, for Uni-directional devices, is measured using a 300 microsecond square wave pulse I F = 50A 3. IR is doubled for Bi-directional devices only with V R equal or less than 10 volts. P6SMBJ Series ELECTRICAL SPECIFICATION @ Tamb 25°C 600W Surface Mount Transient Voltage Suppressors
275www.littelfuse.com 66SILICON DIODE ARRAYS Part Device Reverse Breakdown Maximum Maximum Maximum Maximum Number Code Standoff Voltage Reverse Clamping Peak Pulse Forward Voltage V BR (Volts) @ IT Leakage Voltage Current Voltage VR IR @ VR VC @ IPP IPP @ VC (VF) @ IT (Volts) Min Max (mA) (µA) (Volts) (A) (Volts) Notes: 1. BV is measured using a pulse of 20 milliseconds or less. 2. VF, for Uni-directional devices, is measured using a 300 microsecond square wave pulse I F = 50A. 3. IR is doubled for Bi-directional devices only with V R equal or less than 10 volts. P6SMBJ Series ELECTRICAL SPECIFICATION @ Tamb 25°C 600W Surface Mount Transient Voltage Suppressors
276 www.littelfuse.com Part Device Reverse Breakdown Maximum Maximum Maximum Maximum Number Code Standoff Voltage Reverse Clamping Peak Pulse Forward Voltage V BR (Volts) @ IT Leakage Voltage Current Voltage VR IR @ VR VC @ IPP IPP @ VC (VF) @ IT (Volts) Min Max (mA) (µA) (Volts) (A) (Volts) P6SMBJ Series ELECTRICAL SPECIFICATION @ Tamb 25°C Notes: 1. BV is measured using a pulse of 20 milliseconds or less. 2. VF, for Uni-directional devices, is measured using a 300 microsecond square wave pulse I F = 50A 3. IR is doubled for Bi-directional devices only with V R equal or less than 10 volts. 600W Surface Mount Transient Voltage Suppressors