P6SMB6

P6SMB6 TAITRON | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 6

Technical content

Features

z Breakdown voltage from 6.8 to 250 volts z Low inductance, excellent clamping capability z Repetition rate(duty cycle): 0.01% z Fast response time: typically less than 1.0ps from 0v to V BR z For unidirectional types z Typical IR less than 1 µA above 10V z High temperature soldering guaranteed:250°C/10 seconds at terminals z This series is UL recognized under component index. File number E315008 z RoHS Compliant Mechanical Data Case: JEDEC DO-214AA (SMB) molded plastic over glass passivated junction Epoxy: Meets UL 94V-0 flammability rating Terminals: Solder plated, solderable per MIL-STD-750, Method 2026 Polarity: Color band denoted positive end (cathode) except Bi-directional Mounting position: Any Weight: 0.003 ounces, 0.093 gram Maximum Ratings (T Ambient=25ºC unless noted otherwise) Symbol Description Value Unit Conditions PPPM Peak Pulse Power Dissipation on 10/1000μs Waveform Minimum 600 W Non-repetitive current pulse, per FIG.3 and derated above TA=25° C per FIG.2 IPPM Peak Pulse Current on 10/1000μs Waveform See Table A Non-repetitive current pulse IFSM Peak Forward Surge Current 100 A 8.3ms single half sine-wave superimposed on rated load, (JEDEC Method) (Note 1,2) TJ,TSTG Operating Junction and Storage Temperature Range -55 to 150 ° C Note: 1. Mounted on 5.0mm x 5.0mm (0.03mm thick) copper pads to each terminal 2. 8.3ms single half sine-wave, or equivalent square wave, Duty cycle= 4 pulses per minutes maximum. SMB

600W Surface Mount Transient Voltage Suppressor Rev. D/AH 2008-02-25 P6SMB6.8A - P6SMB250CA www.taitroncomponents.com Page 2 of 6 Electrical Characteristics (T Ambient=25ºC unless noted otherwise) Breakdown Voltage @ Test Current. Part NO. Device Marking Code Reverse Stand-off Voltage V BR Max. Clamping Voltage @ IPPM Max. Peak Pulse Current Max. Reverse Leakage Current @ V WM Uni-Polar Bi-Polar Uni Bi V WM (V) Min. Max. IT(mA) VC (V) IPPM (A) ID (μA) 12.1 50.4 200/400 P6SMB20A P6SMB20CA 20A 20C 17.1 19 21 1 27.7 22.0 1 P6SMB39A P6SMB39CA 39A 39C 33.3 37.1 41 1 53.9 11.3 1 P6SMB56A P6SMB56CA 56A 56C 47.8 53.2 58.8 1 77 7.9 1 P6SMB62A P6SMB62CA 62A 62C 53 58.9 65.1 1 85 7.2 1 P6SMB68A P6SMB68CA 68A 68C 58.1 64.6 71.4 1 92 6.6 1 P6SMB75A P6SMB75CA 75A 75C 64.1 71.3 78.8 1 103 5.9 1 P6SMB82A P6SMB82CA 82A 82C 70.1 77.9 86.1 1 113 5.4 1 P6SMB91A P6SMB91CA 91A 91C 77.8 86.5 95.5 1 125 4.9 1 P6SMB100A P6SMB100CA 100A 100C 85.5 95 105 1 137 4.5 1 P6SMB110A P6SMB110CA 110A 110C 94 105 116 1 152 4.0 1 P6SMB120A P6SMB120CA 120A 120C 102 114 126 1 165 3.7 1 P6SMB130A P6SMB130CA 130A 130C 111 124 137 1 179 3.4 1

600W Surface Mount Transient Voltage Suppressor Rev. D/AH 2008-02-25 P6SMB6.8A - P6SMB250CA www.taitroncomponents.com Page 3 of 6 Fig.1- Peak Pulse Power Rating Curve Td - Pulse Width (sec.) Fig.2- Pulse Derating Curve Ta - Ambient Temperature (°C) Electrical Characteristics (T Ambient=25ºC unless noted otherwise) Breakdown Voltage @ Test Current. Part NO. Device Marking Code Reverse Stand-off Voltage V BR Max. Clamping Voltage @ IPPM Max. Peak Pulse Current Max. Reverse Leakage Current @ V WM Uni-Polar Bi-Polar Uni Bi V WM (V) Min. Max. IT(mA) VC (V) IPPM (A) ID (μA) P6SMB150A P6SMB150CA 150A 150C 128 143 158 1 207 2.9 1 P6SMB160A P6SMB160CA 160A 160C 136 152 168 1 219 2.8 1 P6SMB170A P6SMB170CA 170A 170C 145 162 179 1 234 2.6 1 P6SMB180A P6SMB180CA 180A 180C 154 171 189 1 246 2.5 1 P6SMB200A P6SMB200CA 200A 200C 171 190 210 1 274 2.2 1 P6SMB220A P6SMB220CA 220A 220C 185 209 231 1 328 1.9 1 P6SMB250A P6SMB250CA 250A 250C 214 237 263 1 344 1.8 1 Note: For bi-directional type having VWM of 10V and less, the ID limit is double. Typical Characteristics Curves PPPM - Peak Pulse Power Dissipation (KW) PPPM or IPPM, Derating in Percentage (%)

600W Surface Mount Transient Voltage Suppressor Rev. D/AH 2008-02-25 P6SMB6.8A - P6SMB250CA www.taitroncomponents.com Page 4 of 6 Fig.4 - Max. Non-Repetitive Forward Surge Current Number of Cycles at 60Hz Fig.5- Steady State Power Derating Curve TL - Lead Temperature (°C) Fig.3- Pulse Waveform T - Time (ms) PM(AV) Steady State Power Dissipation (W) IFSM - Peak Forward Surge Current (A) IPPM - Peak Pulse current (%) Fig.6- Typical Junction Capacitance VWM - Reverse Stand-Off Voltage (V) CJ– Junction Capacitance

600W Surface Mount Transient Voltage Suppressor Rev. D/AH 2008-02-25 P6SMB6.8A - P6SMB250CA www.taitroncomponents.com Page 5 of 6 Dimensions in inches (mm) SMB

600W Surface Mount Transient Voltage Suppressor Rev. D/AH 2008-02-25 P6SMB6.8A - P6SMB250CA www.taitroncomponents.com Page 6 of 6 How to contact us: US HEADQUARTERS

28040 WEST HARRISON PARKAWAY, VALENCIA, CA 91355-4162

Tel: (800) TAITRON (800) 824-8766 (661) 257-6060 Fax: (800) TAITFAX (800) 824-8329 (661) 257-6415 Email: taitron@taitroncomponents.com Http://www.taitroncomponents.com TAITRON COMPONENTS MEXICO, S.A .DE C.V. BOULEVARD CENTRAL 5000 INTERIOR 5 PARQUE INDUSTRIAL ATITALAQUIA, HIDALGO C.P.

42970 MEXICO

Tel: +52-55-5560-1519 Fax: +52-55-5560-2190 TAITRON COMPONETS INCORPORATED E REPRESENTAÇÕES DO BRASIL LTDA RUA DOMINGOS DE MORAIS, 2777, 2.ANDAR, SALA 24 SAÚDE - SÃO PAULO-SP 04035-001 BRAZIL Tel: +55-11-5574-7949 Fax: +55-11-5572-0052 TAITRON COMPONETS INCORPORATED, SHANGHAI REPRESENTATIVE OFFICE METROBANK PLAZA, 1160 WEST YAN’ AN ROAD, SUITE 1503, SHANGHAI, 200052, CHINA Tel: +86-21-5424-9942 Fax: +86-21-5424-9931