P6SMB51

DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 7

Technical content

PAGE . 1December 2,2013-REV.08 P6SMB SERIES

FEATURES

• For surface mounted applications in order to optimize board space.
• Glass passivated junction
• Low inductance
• Plastic package has Underwriters Laboratory Fammability Classification 94V-O
• High temperature soldering : 260°C /10 seconds at terminals
• Lead free in compliance with EU RoHS 2011/65/EU directives
• Green molding compound as per IEC61249 Std. . (Halogen Free) MECHANICAL DATA
• Case:JEDEC DO-214AA ,Molded plastic over passivated junction
• Terminals: Solder plated,solderable per MIL-STD-750,Method 2026
• Polarity : Color band denotes cathode end
• Standard Packaging:12mm tape (EIA-481)
• Weight: 0.003 ounce, 0.093 gram NOTES: 1. Non-repetitive current pulse, per Fig.3 and derated above T A = 25 oC per Fig. 2. 2. Mounted on 5mm 2 (0.13mm thick) land areas. 3. Measured on 8.3ms, single half sine-wave or equivalent square wave, duty cycle = 4 pulses per minute maximum. A transient suppressor is selected according to the working peak reverse voltage ( VRWM ), which should be equal to or greater than the DC or continuous peak operating voltage level. DEVICES FOR BIPOLAR APPLICATIONS For Bidirectional use C or CA Suffix for types Ele ctrical characteristics apply in both directions. MAXIMUM RA TINGS AND CHARACTERISTICS Rating at 25°Cambient temperature unless otherwise specified. Resistive or inductive load, 60Hz. For Capacitive load derate current by 20%. SURFACE MOUNT TRANSIENT VOL TAGE SUPPRESSOR POWER 600 Watts BREAK DOWN VOL TAGE 6.8 to 400 Volt Rating Symbol Value Units Peak Pulse Power Dissipation on 10/1000 s waveform (Notes 1,2, Fig.1) PPP 600 Watts Peak Forward Surge Current 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) (Notes 2,3) IFSM 100 Amps Peak Pulse Current on 10/1000s waveform (Notes 1) Fig.3 IPPM see T able 1 Amps Typical Thermal Resistance Junction to Air (Notes 2) RJA 60 OC / W Operating Junction and Storage T emperature Range TJ,TSTG -55 to +150 OC 0.083(2.11) 0.075(1.91) 0.185(4.70) 0.160(4.06) 0.096(2.44) 0.083(2.13) 0.050(1.27) 0.030(0.76) 0.220(5.59) 0.200(5.08) 0.012(0.305) 0.006(0.152) 0.155(3.94) 0.130(3.30)

PAGE . 2December 2,2013-REV.08 P6SMB SERIES Part Number Reverse Stand-off Voltage Breakdown Voltage Te s t Current Reverse Leakage Max. Clamp Voltage 10/1000s Peak Pulse Current 10/1000s Marking Code VRWM (Notes 4) VBR @ I T IT IR @ VRWM VC @ IPP IPP Min. Max. UNI BI UNI BI V V V mA A A V A UNI BI 600W Transient Voltage Suppressor P6SMB10 P6SMB10C 8.1 9 11 1 10 20 15 40 EZJ DZJ P6SMB10A P6SMB10CA 8.55 9.5 10.5 1 10 20 14.5 41 EZK DZK P6SMB11 P6SMB11C 8.92 9.9 12.1 1 5 10 16.2 37 EZL DZL P6SMB11A P6SMB11CA 9.4 10.5 11.6 1 5 10 15.6 38 EZM DZM P6SMB12 P6SMB12C 9.72 10.8 13.2 1 5 5 17.3 35 EZN DZN P6SMB12A P6SMB12CA 10.2 11.4 12.6 1 5 5 16.7 36 EZP DZP P6SMB13 P6SMB13C 10.5 11.7 14.3 1 1 1 19 32 EZQ DZQ P6SMB13A P6SMB13CA 11.1 12.4 13.7 1 1 1 18.2 33 EZR DZR P6SMB15 P6SMB15C 12.1 13.5 16.5 1 1 1 22 27 EZS DZS P6SMB15A P6SMB15CA 12.8 14.3 15.8 1 1 1 21.2 28 EZT DZT P6SMB16 P6SMB16C 12.9 14.4 17.6 1 1 1 23.5 26 EZU DZU P6SMB16A P6SMB16CA 13.6 15.2 16.8 1 1 1 22.5 27 EZV DZV P6SMB18 P6SMB18C 14.5 16.2 19.8 1 1 1 26.5 23 EZW DZW P6SMB18A P6SMB18CA 15.3 17.1 18.9 1 1 1 25.2 24 EZX DZX P6SMB20 P6SMB20C 16.2 18 22 1 1 1 29.1 21 EZY DZY P6SMB20A P6SMB20CA 17.1 19 21 1 1 1 27.7 22 EZZ DZZ P6SMB22 P6SMB22C 17.8 19.8 24.2 1 1 1 31.9 19 EXA DXA P6SMB22A P6SMB22CA 18.8 20.9 23.1 1 1 1 30.6 20 EXB DXB P6SMB24 P6SMB24C 19.4 21.6 26.4 1 1 1 34.7 17 EXC DXC P6SMB24A P6SMB24CA 20.5 22.8 25.2 1 1 1 33.2 18 EXD DXD P6SMB27 P6SMB27C 21.8 24.3 29.7 1 1 1 39.1 15 EXE DXE P6SMB27A P6SMB27CA 23.1 25.7 28.4 1 1 1 37.5 16 EXF DXF P6SMB30 P6SMB30C 24.3 27 33 1 1 1 43.5 14 EXG DXG P6SMB36 P6SMB36C 29.1 32.4 39.6 1 1 1 52 11.6 EXL DXL P6SMB36A P6SMB36CA 30.8 34.2 37.8 1 1 1 49.9 12 EXM DXM P6SMB39A P6SMB39CA 33.3 37.1 41 1 1 1 53.9 11.2 EXP DXP

PAGE . 3December 2,2013-REV.08 P6SMB SERIES Part Number Reverse Stand-off Voltage Breakdown Voltage Te s t Current Reverse Leakage Max. Clamp Voltage 10/1000s Peak Pulse Current 10/1000s Marking Code VRWM (Notes 4) VBR @ I T IT IR @ VRWM VC @ IPP IPP Min. Max. UNI BI UNI BI V V V mA A A V A UNI BI 600W Transient Voltage Suppressor P6SMB56A P6SMB56CA 47.8 53.2 58.8 1 1 1 77 7.8 EXX DXX P6SMB62 P6SMB62C 50.2 55.8 68.2 1 1 1 89 6.8 EXY DXY P6SMB62A P6SMB62CA 53 58.9 65.1 1 1 1 85 7.1 EXZ DXZ P6SMB68 P6SMB68C 55.1 61.2 74.8 1 1 1 98 6.1 EY A DY A P6SMB68A P6SMB68CA 58.1 64.6 71.4 1 1 1 92 6.5 EYB DYB P6SMB75 P6SMB75C 60.7 67.5 82.5 1 1 1 108 5.5 EY C DYC P6SMB75A P6SMB75CA 64.1 71.3 78.8 1 1 1 103 5.8 EY D DYD P6SMB82 P6SMB82C 66.4 73.8 90.2 1 1 1 118 5.1 EYE DYE P6SMB82A P6SMB82CA 70.1 77.9 86.1 1 1 1 113 5.3 EY F DY F P6SMB91 P6SMB91C 73.7 81.9 100 1 1 1 131 4.5 EY G DYG P6SMB91A P6SMB91CA 77.8 86.5 95.5 1 1 1 125 4.8 EYH DYH P6SMB100 P6SMB100C 81 90 110 1 1 1 144 4.2 EY J DYJ P6SMB100A P6SMB100CA 85.5 95 105 1 1 1 137 4.4 EYK DYK P6SMB110 P6SMB110C 89.2 99 121 1 1 1 158 3.8 EYL DY L P6SMB110A P6SMB110CA 94 105 116 1 1 1 152 4 EY M DYM P6SMB120 P6SMB120C 97.2 108 132 1 1 1 173 3.5 EYN DYN P6SMB120A P6SMB120CA 102 114 126 1 1 1 165 3.6 EYP DYP P6SMB130 P6SMB130C 105 117 143 1 1 1 187 3.2 EY Q DYQ P6SMB130A P6SMB130CA 111 124 137 1 1 1 179 3.3 EYR DYR P6SMB150 P6SMB150C 121 135 165 1 1 1 215 2.8 EYS DYS P6SMB150A P6SMB150CA 128 143 158 1 1 1 207 2.9 EY T DY T P6SMB160 P6SMB160C 130 144 176 1 1 1 230 2.6 EYU DYU P6SMB160A P6SMB160CA 136 152 168 1 1 1 219 2.7 EYV DYV P6SMB170 P6SMB170C 138 153 187 1 1 1 244 2.5 EY W DY W P6SMB170A P6SMB170CA 145 162 179 1 1 1 234 2.6 EY X DYX P6SMB180 P6SMB180C 146 162 198 1 1 1 258 2.3 EY Y DY Y P6SMB180A P6SMB180CA 154 171 189 1 1 1 246 2.4 EY Z DY Z P6SMB200 P6SMB200C 162 180 220 1 1 1 287 2.1 EWA DWA P6SMB200A P6SMB200CA 171 190 210 1 1 1 274 2.2 EWB DWB P6SMB220 P6SMB220C 175 198 242 1 1 1 344 1.8 EWC DWC P6SMB220A P6SMB220CA 185 209 231 1 1 1 328 1.9 EWD DWD P6SMB250 P6SMB250C 202 225 275 1 1 1 360 1.7 EWE DWE P6SMB250A P6SMB250CA 214 237 263 1 1 1 344 1.8 EWF DWF P6SMB400A - 342 380 420 1 1 - 548 1.1 EWM -

PAGE . 4December 2,2013-REV.08 P6SMB SERIES

PAGE . 5December 2,2013-REV.08 P6SMB SERIES MOUNTING P AD LA YOUT ORDER INFORMA TION

• Packing information T/R - 3K per 13" plastic Reel T/R - 0.5K per 7" plastic Reel

PAGE . 6December 2,2013-REV.08 P6SMB SERIES Part No_packing code_Version P6SMB6.8_R1_00001 P6SMB6.8_R2_00001 For example : RB500V-40_R2_00001 Part No. Serial number Version code means HF Packing size code means 13" Packing type means T/R Packing Code XX Version Code XXXXX Packing type 1st Code Packing size code 2nd Code HF or RoHS 1st Code 2 nd~5th Code Tape and Ammunition Box (T/B) A N/A 0 HF 0 serial number Tape and Reel (T/R) R 7" 1 RoHS 1 serial number Bulk Packing (B/P) B 13" 2 Tube Packing (T/P) T 26mm X Tape and Reel (Right Oriented) (TRR) S 52mm Y Tape and Reel (Left Oriented) (TRL) L PANASERT T/B CATHODE UP (PBCU) U FORMING F PANASERT T/B CATHODE DOWN (PBCD) D

PAGE . 7December 2,2013-REV.08 P6SMB SERIES Disclaimer

• Reproducing and modifying information of the document is prohibited without permission from Panjit International Inc..
• Panjit International Inc. reserves the rights to ma ke changes of the content here in the document anytime without notification. Please refer to our website f or the latest document. Panjit International Inc. disclaims any and all liability arising out of the a pplication or use of any product including da mages incidentally and consequentially occurred.
• Panjit International Inc. does not a ssume any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability.
• Applications shown on the herein document are exa mples of standard use and operation. Customers are responsible in comprehending the suitable use in particular a pplications. Panjit International Inc. makes no representation or warranty that such a pplications will be suitable for the specified use without further testing or modification.
• The products shown herein are not designed and authorized for equipments requiring high level of reliability or relating to huma n life and for any applications concerning life-saving or life-sustaining, such a s medical instruments, transportation equipment, aerospace machinery et cetera. Customers using or selling the se products for use in such a pplications do so at their own risk and agree to fully indemnify Panjit International Inc. for any damages resulting from such improper use or sale.
• Since Panjit uses lot number as the tracking base, please provide the lot number for tracking when complaining.